journal article·2023-07

Enhance the mechanical and water resistance performance of flue gas desulfurization gypsum by quaternary phase

Chunxia Wu, Jianhui He, Kun Wang, Lu Yang, Fazhou Wang

Publisher page

Abstract

Flue gas desulfurization gypsum-quaternary phase (FGD gypsum-Q phase) system is investigated to enhance the mechanical and water resistance performance of gypsum specimens. FGD gypsum specimens were prepared with 5–15% content of Q phase at the standard consistency fluidity. Setting time, compressive strength, and water resistance of gypsum specimens were discussed. The results indicated that gypsum specimens with 10% Q phase cured at 7 d had the highest softening coefficient of 0.689 and water absorption of 20.42%, of which, dry compressive strength could reach to18.95 MPa and wet compressive strength could reach 13.06 MPa. The structural properties of gypsum specimens were detected by XRD, TG, SEM, 27Al NMR, and LF-NMR. The hydration heat of FGD gypsum-Q phase system was measured to characterize hydration. These results suggested that Q phase extended the heat release time of the system, and increased the total hydration heat, while hydrates could refine the pore structure, in which the primary hydrates included calcium sulfate dihydrate, ettringite, monosulfoaluminate, and gibbsite. It is concluded that Q phase could improve the compressive strength and water resistance of FGD gypsum specimens, which contributes to the application of FGD gypsum and Q phase.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Grouting, Rheology, and Soil Mechanics · Geotechnical Engineering and Soil Stabilization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (62)

Show source-provided references
1. China Electricity Council, Analysis and Forecast Report on National Power Supply and Demand in the Third Quarter of 2022. https://cec.org.cn/detail/index.html?3-314813, 2022 (accessed 1 January 2023).
2. Effect of flue gas desulfurization gypsum addition on critical chloride content for rebar corrosion in fly ash concrete10.1016/j.conbuildmat.2021.122963 ↗
3. Production and resource utilization of flue gas desulfurized gypsum in China - A review10.1016/j.envpol.2021.117799 ↗
4. Investigation the synergistic effects in quaternary binder containing red mud, blast furnace slag, steel slag and flue gas desulfurization gypsum based on artificial neural networks10.1016/j.jclepro.2020.122972 ↗
5. Recent advances in flue gas desulfurization gypsum processes and applications - A review10.1016/j.jenvman.2019.109572 ↗
6. Evaluation of the performance of recycled textile fibres in the mechanical behaviour of a gypsum and cork composite material10.1016/j.cemconcomp.2015.01.001 ↗
7. Activation mechanisms of three types of industrial by-product gypsums on steel slag–granulated blast furnace slag-based binders10.1016/j.conbuildmat.2021.123111 ↗
8. Lightweight gypsum composites: Design strategies for multi-functionality10.1016/j.cemconcomp.2010.09.011 ↗
9. Contribution of calcium aluminates to the water resistance of hydrated calcium sulfates
10. C. J, B. J, Holographic interferometry study of the dissolution and diffusion of gypsum in water, Geochimica et Cosmochimica Acta: Journal of the Geochemical Society and the Meteoritical Society Vol.71(No.8) (2007) 1913-1920.10.1016/j.gca.2007.01.012 ↗
11. An efficient model for estimation of gypsum (calcium sulfate di-hydrate) solubility in aqueous electrolyte solutions over wide temperature ranges10.1016/j.molliq.2019.02.077 ↗
12. Dissolution Kinetics of Polycrystalline Calcium Sulfate-Based Materials: Influence of Chemical Modification10.1021/am200754q ↗
13. Intrinsic Kinetics of Gypsum and Calcium Sulfate Anhydrite Dissolution: Surface Selective Studies under Hydrodynamic Control and the Effect of Additives10.1021/jp201718b ↗
14. Characteristics of acrylic latex-modified and partially epoxy-impregnated gypsum10.1016/S0008-8846(01)00575-0 ↗
15. Improved water and efflorescence resistance of flue gas desulfurization gypsum-based composites by generating hydrophobic coatings10.1016/j.jclepro.2022.133711 ↗
16. Study on mechanical strength and water resistance of organosilicon waterproofing agent blended recycled gypsum plaster
17. The improvement of the water-resistance of the phosphogypsum by adding waste metallurgical sludge
18. Application of waste ceramic dust as a ready-to-use replacement of cement in lime-cement plasters: an environmental-friendly and energy-efficient solution10.1007/s10098-016-1183-2 ↗
19. Research on optimizing performance of desulfurization-gypsum-based composite cementitious materials based on response surface method10.1016/j.conbuildmat.2022.127874 ↗
20. Effects of modified materials prepared from wastes on the performance of flue gas desulfurization gypsum-based composite wall materials10.1016/j.conbuildmat.2020.119519 ↗
21. Investigation of environmentally friendly gypsum based composites with improved water resistance10.1016/j.jclepro.2022.133278 ↗
22. Hydration and hydraulic properties of the Q phase in the system CaO-Al2O3-MgO-H2O referred to high alumina cements10.1016/0008-8846(89)90003-3 ↗
23. The structure of a quaternary phase Ca20Al32−2vMgvSivO68, Acta Crystallographica Section B: Structural Crystallography and Crystal
24. Kinetics and mechanism of formation of 20CaO· 13Al2O3· 3MgO· 3SiO210.1179/1743285515Y.0000000005 ↗
25. Y.Z. Jiao, P. Ding, S.L. Du, Research on mineral formation mechanism of pulverized coal combustion boiler co-generating Q-phase cement clinker, Advanced Materials Research, Trans Tech Publ, 2012, pp. 1687-1691.10.4028/www.scientific.net/AMR.512-515.1687 ↗
26. B. Li, X. Feng, X. Min. Studies on quantum chemistry calculations of structure and properties of aluminate cement minerals, Chinese Journal of Computational Physics 15(06) (1998) 119-122, 10.19596/j.cnki.1001-246x.1998.06.018. (in chinese).
27. High-alumina cement production from FeNi-ERF slag, limestone and diasporic bauxite10.1016/j.cemconres.2003.11.004 ↗
28. Hydration of quaternary phase-gypsum system10.1016/j.conbuildmat.2017.06.179 ↗
29. Comparative study of hydration of monocalcium aluminate and quaternary phase and the amorphous AH3 phase in their hydrates10.1007/s10973-019-09069-9 ↗
30. Scrivener · 2016
31. Hydration investigation of negative temperature concrete at early age based on low-field nuclear magnetic resonance10.1016/j.coldregions.2021.103449 ↗
32. K.R. Brownstein, C.E. Tarr, Importance of classical diffusion in NMR studies of water in biological cells, Department of Physics and Astronomy, University of Maine, Orono, Maine 04469 Vol.19(No.6) (1979) 2446, 10.1103/PhysRevA.19.2446.10.1103/PhysRevA.19.2446 ↗
33. Insights into the properties and chloride binding capacity of β-hemihydrate in the presence of slag powder and white calcium aluminate cement10.1016/j.conbuildmat.2020.119798 ↗
34. Early Production of High Strength and Improved Water Resistance Gypsum Mortars from Used Plaster Mould and Cullet Waste10.1061/(ASCE)MT.1943-5533.0003179 ↗
35. Study on performance and function mechanisms of whisker modified flue gas desulfurization (FGD) gypsum10.1016/j.conbuildmat.2021.124341 ↗
36. Effect of tricalcium aluminate and nano silica on performance of hemihydrate gypsum10.1016/j.conbuildmat.2022.126362 ↗
37. Preparation of waterproof block by silicate clinker modified FGD gypsum10.1016/j.conbuildmat.2019.04.053 ↗
38. R.A. Garalde, E. Orendain, J. Urbona, Effect of storage environment on the crystallinity and compressive load of starch based biodegradable cup, IOP Conference Series: Materials Science and Engineering Vol.634(Conference 1) (2019) 012026, 10.1088/1757-899x/634/1/012026.10.1088/1757-899X/634/1/012026 ↗
39. Stability and decomposition mechanism of ettringite in presence of ammonium sulfate solution10.1016/j.conbuildmat.2016.07.135 ↗
40. Understanding expansion in calcium sulfoaluminate–belite cements10.1016/j.cemconres.2011.07.010 ↗
41. The synergistic effect of AFt enhancement and expansion in Portland cement-aluminate cement-FGD gypsum composite cementitious system10.1016/j.conbuildmat.2018.09.139 ↗
42. Initial hydration reactions and mechanisms of delayed ettringite formation in Portland cements10.1016/0958-9465(96)00016-9 ↗
43. Insight into the influences of β-hemihydrate and dihydrate gypsum on the properties and phase conversion of white calcium aluminate cement10.1016/j.conbuildmat.2020.120106 ↗
44. Investigation of early hydration dynamics and microstructural development in ordinary Portland cement using 1H NMR relaxometry and isothermal calorimetry10.1016/j.cemconres.2016.01.007 ↗
45. Microstructural evolution of aluminum hydroxide gel during the hydration of calcium sulfoaluminate under different alkali concentrations10.1016/j.conbuildmat.2018.06.010 ↗
46. Microstructure of amorphous aluminum hydroxide in belite-calcium sulfoaluminate cement10.1016/j.cemconres.2015.01.013 ↗
47. Stability in the system CaO–Al2O3–H2O10.1016/j.cemconres.2012.09.002 ↗
48. Iron-rich slag addition in ternary binders of Portland cement, aluminate cement and calcium sulfate10.1016/j.cemconres.2021.106689 ↗
49. Effects of amorphous AH3 phase on mechanical properties and hydration process of C4A3S¯-CS¯H2-CH-H2O system10.1016/j.conbuildmat.2016.11.111 ↗
50. Effects of amorphous aluminum hydroxide on chloride immobilization in cement-based materials10.1016/j.conbuildmat.2019.117171 ↗
51. Effect of micro-sized alumina powder on the hydration products of calcium aluminate cement at 40°C10.1016/j.ceramint.2016.06.005 ↗
52. DuraLith geopolymer waste form for Hanford secondary waste: correlating setting behavior to hydration heat evolution10.1016/j.jhazmat.2014.05.070 ↗
53. On the Relation of Setting and Early-Age Strength Development to Porosity and Hydration in Cement-Based Materials10.1016/j.cemconcomp.2016.02.010 ↗
54. Hydration kinetics of tricalcium silicate by calorimetric methods10.1016/j.jcis.2011.08.010 ↗
55. Mechanical property and microstructure of quaternary phase paste blended with metakaolin10.1016/j.cemconcomp.2021.103934 ↗
56. AH3 phase in the hydration product system of AFt-AFm-AH3 in calcium sulfoaluminate cements: A microstructural study10.1016/j.conbuildmat.2018.02.052 ↗
57. The effect of equilibration time on Al uptake in C-S-H10.1016/j.cemconres.2021.106438 ↗
58. Influencing factors on micromechanical properties of calcium (alumino) silicate hydrate C-(A-)S-H under nanoindentation experiment10.1016/j.cemconres.2020.106088 ↗
59. A novel method for semi-quantitative analysis of hydration degree of cement by 1H low-field NMR10.1016/j.cemconres.2020.106329 ↗
60. Comparison of liquid absorption-release of superabsorbent polymers in alkali-activated slag and Portland cement systems: An NMR study combined with additional methods10.1016/j.cemconres.2021.106369 ↗
61. A mechanism to explain the creep behavior of gypsum plaster10.1016/j.cemconres.2017.04.012 ↗
62. Application of Low-Field NMR to the Pore Structure of