journal article·2023-07Open access

Effects of characteristic hydrates on the pore structure and fracture behavior of CAC bonded alumina-spinel castables

Wenjing Liu, Ning Liao, Mithun Nath, Yawei Li, Yajie Dai, Liping Pan

Abstract

In the present study, the characteristic hydrates (CAH 10 , C 2 AH 8 , and C 3 AH 6 ) were evaluated at individual curing temperatures (10 °C, 25 °C, and 40 °C), and the influences of these characteristic hydrates on the pore structure and fracture behaviors of alumina-spinel castables were systematically investigated. The results revealed that the specimens cured at 10 and 25 °C showed refined and complicated pore structures (higher fractal dimension) after treatment at 1600 °C owing to a higher dispersion of CaO and closely interlocked CA 6 structures. In comparison, the enhanced hydration degree at 40 °C (mostly C 3 AH 6 ) had no positive effect on the formation of nano-pores. Consequently, the generation of plate-like C 2 AH 8 at 25 °C contributed to higher bonding strength after demolding and firing. The optimized microstructures facilitated cracks propagation within the matrixes and along aggregate-matrix interfaces, improving the toughness of castables and obtaining optimal comprehensive properties.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Concrete and Cement Materials Research · Recycling and utilization of industrial and municipal waste in materials production

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. Thermodynamic evaluation of spinel containing refractory castables corrosion by secondary metallurgy slag10.1016/j.ceramint.2010.11.043 ↗
2. Spinel-containing alumina-based refractory castables10.1016/j.ceramint.2011.03.049 ↗
3. Microstructure analysis of corroded alumina-spinel castable rafractories10.1016/S0955-2219(96)00073-8 ↗
4. Microstructural changes and evolutions of elastic properties versus temperature of alumina and alumina–magnesia refractory castables10.1016/j.jeurceramsoc.2008.02.012 ↗
5. Thermomechanical finite element modeling of steel ladle containing alumina spinel refractory lining10.1016/j.finel.2022.103762 ↗
6. Erosion and corrosion of alumina refractory by ingot casting steels10.1016/j.jeurceramsoc.2015.11.038 ↗
7. A method for steel ladle lining optimization applying thermomechanical modeling and Taguchi approaches10.1007/s11837-018-3063-1 ↗
8. Slag attack evaluation of in situ spinel-containing refractory castables via experimental tests and thermodynamic simulations10.1016/j.ceramint.2011.09.033 ↗
9. Effect of spinel content on slag attack resistance of high alumina refractory castables10.1016/j.jeurceramsoc.2007.04.007 ↗
10. Effect of micro-sized hydromagnesite addition on the properties of calcium aluminate cement-bonded castables10.1016/j.ceramint.2018.04.114 ↗
11. Effect of micro-sized MgCO3 addition on properties of MgAl2O4 spinel containing castables10.1016/j.ceramint.2017.04.174 ↗
12. Effect of the water-soluble calcium chloride on volumetric stability and thermal shock resistance of alumina-based castables
13. Effect of curing time on the properties of CAC bonded refractory castables10.1016/S0955-2219(03)00371-6 ↗
14. Effect of curing temperature and water-to-cement ratio on corrosion of steel in calcium aluminate cement concrete10.1016/j.conbuildmat.2022.128875 ↗
15. Effects of phosphogypsum on hydration properties and strength of calcium aluminate cement10.1016/j.conbuildmat.2022.128398 ↗
16. Hydration behavior of calcium aluminate cement mortars with mineral admixtures at different curing temperatures10.1016/j.conbuildmat.2021.122839 ↗
17. Mechanical properties and micro-structures of calcium aluminate based ultra high strength cement10.1016/j.cemconres.2010.01.001 ↗
18. Effect of curing time on the volume stability of corundum based castables bonded with calcium aluminate cement10.1016/j.ceramint.2020.06.253 ↗
19. Effects of curing time on the pore structure evolution and fracture behavior of CAC bonded alumina-spinel castables10.1016/j.ceramint.2022.05.153 ↗
20. Effect of curing temperature on volume stability of CAC-bonded alumina-based castables10.1016/j.ceramint.2019.03.103 ↗
21. Conversion of calcium aluminate cement hydrates at 60 °C with and without water10.1111/jace.15505 ↗
22. Effect of CaSO4 on hydration and phase conversion of calcium aluminate cement10.1016/j.conbuildmat.2019.07.004 ↗
23. Phase and porosity changes in a calcium aluminate cement and alumina system under hydrothermal conditions10.1016/j.ceramint.2022.09.353 ↗
24. The effect of temperature on the formation of the hydrated calcium aluminate cement structure10.1016/j.proeng.2013.04.015 ↗
25. The role of pre-heating and mineral additive modification on long-term strength development of calcium aluminate cement mortars10.1016/j.conbuildmat.2022.127720 ↗
26. Effect of structurally different aluminosilicates on early-age hydration of calcium aluminate cement depending on temperature10.1016/j.conbuildmat.2019.117404 ↗
27. Investigation of fracture behavior of cement-bonded corundum castables using wedge splitting test and digital image correlation method10.1016/j.jeurceramsoc.2019.11.081 ↗
28. Hydration, shrinkage, pore structure and fractal dimension of silica fume modified low heat Portland cement-based materials10.1016/j.conbuildmat.2020.121952 ↗
29. Fractal dimensions of pore spaces in unconventional reservoir rocks using X-ray nano- and micro-computed tomography10.1016/j.jngse.2018.05.011 ↗
30. In-depth investigation of pore structure and fracture behavior of CAC bonded alumina-spinel castables treated at 110∼1600 °C10.1016/j.ceramint.2022.07.321 ↗
31. Hydration kinetics of CA2 and CA-investigations performed on a synthetic calcium aluminate cement10.1016/j.cemconres.2012.09.005 ↗
32. Evolution of elastic properties and microstructural changes versus temperature in bonding phases of alumina and alumina–magnesia refractory castables10.1016/j.jeurceramsoc.2007.01.016 ↗
33. Linking multi-scale 3D microstructure to potential enhanced natural gas recovery and subsurface CO2 storage for Bowland shale, UK10.1039/D0EE03651J ↗
34. Analysis of pore size distribution and fractal dimension in tight sandstone with mercury intrusion porosimetry10.1016/j.rinp.2019.102283 ↗
35. Scale-dependent nature of the surface fractal dimension for bi- and multi-disperse porous solids by mercury porosimetry10.1016/j.apsusc.2006.02.009 ↗
36. Drying behavior of dense refractory ceramic castables. Part 1-General aspects and experimental techniques used to assess water removal10.1016/j.ceramint.2021.05.022 ↗
37. Relationship between the strength and microstructure of CAC-bonded castables under intermediate temperatures10.1016/j.ceramint.2019.09.046 ↗
38. Calcium aluminate cement in castable alumina: from hydrate bonding to the in situ formation of calcium hexaluminate10.1016/j.ceramint.2021.02.066 ↗
39. Stability of crack propagation associated with fracture energy determined by wedge splittiing specimen10.1016/0167-8442(95)00008-3 ↗
40. The influence of microstructure on the maximum load and fracture energy of refractory castables10.1016/j.ceramint.2009.07.033 ↗
41. Investigation of microstructure-property relantionships of magnesia-hercynite refractory composites by a refined digital image correlation technique10.1016/j.jeurceramsoc.2019.05.010 ↗
42. Khlifi · 2019
43. Effectiveness of acoustic emission parameters to monitor the crack formation in refractories – case study on castables of different brittleness10.1016/j.jeurceramsoc.2019.08.016 ↗
44. Considering damage during fracture tests on nanomodified laminates using the acoustic emission method10.1016/j.euromechsol.2018.06.011 ↗
45. Synergic effects of nano carbon sources on thermal shock resistance of Al2O3-C refractories10.1016/j.ceramint.2017.07.201 ↗