journal article·2023-07

Experimental study on the preparation and physical thermal performance of coral sand-based phase change material concrete composites

Yuting Wang, Zhibin Liu, Chunlei Jin, Liangliang Lu, Mei Bai

Publisher page

Abstract

To promote the application of phase change materials (PCMs) in the field of green building, this research prepared coral sand-based PCM composites by vacuum adsorption method with coral sand as the porous carrier and polyethylene glycol 1000 as phase change material. The thermal and physical properties of the material, and its leakage characteristics after cement encapsulation were investigated through scanning electron microscope (SEM), differential scanning calorimetry (DSC), fourier transform infrared spectrometer (FT-IR), x-ray powder diffractometer (XRD), and thermal gravimetric analysis (TGA). The DSC results indicated that the coral sand-PCM composites had a melting point and latent heat capacity of 28.55℃ and 48.57 J/g, respectively. TGA and thermal cycling test demonstrated that coral sand-based PCM composites had good stability in terms of their chemical structure, thermal degradation, and cycling reliability in latent thermal energy capacity properties. The coral sand-based PCM composites were later prepared as coral sand-based PCM concrete composites by replacing coarse aggregates with different proportions. And the compressive strength of the PCM concrete composites was tested. In addition, the thermal insulation properties of coral sand-based PCM concrete composites were verified through model tests. The results of model test showed that the maximum indoor temperature differences between the Oridinary-0 and CS-50 concrete rooms were 7.45℃ during heating and 2.61℃ during cooling. The strength of coral sand-based concrete still could meet the requirements according to the structural design code at a mass substitution ratio of 50%. The CS-50 composite concrete exhibited acceptable mechanical properties and was able to regulate indoor temperatures and reduce energy consumption in buildings. Therefore, it is suitable for engineering applications.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Phase Change Materials Research · Adsorption and Cooling Systems · Solar Thermal and Photovoltaic Systems

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (56)

Show source-provided references
1. International Energy Agency(IEA). Energy Policies of IEA Countries: United Kingdom 2012. Paris, France[EB/OL]. https://www.iea.org, 2012.
2. A review on modeling and simulation of building energy systems[J]10.1016/j.rser.2015.12.040 ↗
3. Multi-objective optimization for building retrofit strategies: A model and an application[J]10.1016/j.enbuild.2011.10.016 ↗
4. Empirical analysis of building energy consumption and urban form in a large city: A case of Seoul, South Korea[J]10.1016/j.enbuild.2021.111046 ↗
5. Energy performance of buildings with composite phase-change material wallboards in different climatic zones of China[J]10.1016/j.enbuild.2022.112398 ↗
6. Numerical modeling and optimization of annual thermal characteristics of an office room with PCM active–passive coupling system[J]10.1016/j.enbuild.2021.111629 ↗
7. A comprehensive review on phase change materials for heat storage applications: Development, characterization, thermal and chemical stability[J]10.1016/j.solmat.2021.111392 ↗
8. Graphite foam as interpenetrating matrices for phase change paraffin wax: A candidate composite for low temperature thermal energy storage[J]10.1016/j.solmat.2017.08.004 ↗
9. A comprehensive review on development of eutectic organic phase change materials and their composites for low and medium range thermal energy storage applications[J]10.1016/j.solmat.2020.110955 ↗
10. Novel approaches and recent developments on potential applications of phase change materials in solar energy[J]10.1016/j.rser.2017.09.043 ↗
11. PCM thermocline thermal storage for CSP. Numerical evaluation of its application in a 50 MWe plant10.1016/j.solener.2015.06.029 ↗
12. Application of PCM underfloor heating in combination with PCM wallboards for space heating using price based control system10.1016/j.apenergy.2015.03.027 ↗
13. Experimental evaluation of the heat transfer through small PCM-based thermal energy storage units for building applications10.1016/j.enbuild.2016.01.003 ↗
14. Polyethylene glycol (PEG)/diatomite composite as a novel form-stable phase change material for thermal energy storage[J]10.1016/j.solmat.2011.01.022 ↗
15. Form-Stabilized Polyethylene Glycol/Palygorskite Composite Phase Change Material: Thermal Energy Storage Properties, Cycling Stability, and Thermal Durability[J]10.1002/pen.25346 ↗
16. Composites of polyethylene glycol (PEG600) with gypsum and natural clay as new kinds of building PCMs for low temperature-thermal energy storage[J]10.1016/j.enbuild.2013.10.034 ↗
17. Diatomite/CNTs/PEG composite PCMs with shape-stabilized and improved thermal conductivity: Preparation and thermal energy storage properties[J]10.1016/j.enbuild.2018.01.009 ↗
18. A cycling study for reliability, chemical stability and thermal durability of polyethylene glycols of molecular weight 2000 and 10000 as organic latent heat thermal energy storage materials[J]10.1002/er.5079 ↗
19. Properties of concretes enhanced with phase change materials for building applications[J]10.1016/j.enbuild.2019.07.014 ↗
20. Fabrication and stability of form-stable diatomite/paraffin phase change material composites[J]10.1016/j.enbuild.2014.02.082 ↗
21. Review of passive PCM latent heat thermal energy storage systems towards buildings’ energy efficiency[J]10.1016/j.enbuild.2012.12.042 ↗
22. Obtaining an energy storing building material by direct incorporation of an organic phase change material in gypsum wallboard[J]10.1016/0165-1633(91)90021-C ↗
23. Thermal energy storage in building integrated thermal systems: A review. Part 2. Integration as passive system[J]10.1016/j.renene.2015.06.064 ↗
24. Synthesis and properties of thermally enhanced aerated geopolymer concrete using form-stable phase change composite[J]10.1016/j.jobe.2021.102756 ↗
25. Preparation and Properties of Phase-changing Energy-storing Concrete[J]
26. Preparation and characterization of a capric acid-stearic acid-ceramsite-concrete composite phase change material[J]
27. Development of structural–functional integrated concrete with macro-encapsulated PCM for thermal energy storage[J]10.1016/j.apenergy.2015.03.137 ↗
28. Development and optimisation of phase change material-impregnated lightweight aggregates for geopolymer composites made from aluminosilicate rich mud and milled glass powder[J]10.1016/j.conbuildmat.2016.02.029 ↗
29. Utilization of macro encapsulated phase change materials for the development of thermal energy storage and structural lightweight aggregate concrete[J]10.1016/j.apenergy.2014.11.022 ↗
30. Interpretation of coarse effect in simple shear behavior of binary sand-gravel mixture by DEM with authentic particle shape[J]10.1016/j.conbuildmat.2018.11.059 ↗
31. Particle breakage characteristics of a foundation filling material on island-reefs in the South China Sea[J]10.1016/j.conbuildmat.2021.124690 ↗
32. One-dimensional compression behavior of calcareous sand and marine clay mixtures[J]10.1061/(ASCE)GM.1943-5622.0001763 ↗
33. Effect of basalt fiber on the dynamic mechanical properties of cement-soil in SHPB test[J]10.1061/(ASCE)MT.1943-5533.0002386 ↗
34. Impact response of steel fiber-reinforced concrete using a split Hopkinson pressure bar[J]10.1061/(ASCE)0899-1561(2004)16:1(54) ↗
35. Dynamic compressive behavior of concrete confined with unidirectional natural flax FRP based on SHPB tests[J]10.1016/j.compstruct.2020.113233 ↗
36. Experimental investigation of whole stress-strain curves of coral concrete[J]10.1016/j.conbuildmat.2016.06.064 ↗
37. Preparation technology, mechanical properties and durability of coral aggregate seawater concrete in the island-reef environment[J]10.1016/j.jclepro.2022.130572 ↗
38. Effect of coral sand powders and seawater salinity on the impact mechanical properties of cemented coral sand[J]10.1016/j.sandf.2022.101206 ↗
39. Coral aggregate concrete: Numerical description of physical, chemical and morphological properties of coral aggregate[J]10.1016/j.cemconcomp.2019.03.016 ↗
40. The development of coral concretes and their upgrading technologies: A critical review[J]10.1016/j.conbuildmat.2018.07.202 ↗
41. Palm kernel shell-activated carbon as an inorganic framework for shape-stabilized phase change material[J]10.3390/nano8090689 ↗
42. Thermo-mechanical behavior of novel wood laminae-thermoplastic starch biodegradable composites with thermal energy storage/release capability[J]10.3389/fmats.2019.00076 ↗
43. Assessing the feasibility of integrating form-stable phase change material composites with cementitious composites and prevention of PCM leakage[J]10.1016/j.matlet.2016.12.052 ↗
44. Ministry of Housing and Urban-Rural Development of PRC · 2006
45. Ministry of Housing and Urban-Rural Development of PRC · 2010
46. Ministry of Housing and Urban-Rural Development of PRC · 2011
47. Ministry of Housing and Urban-Rural Development of PRC · 2016
48. Ministry of Housing and Urban-Rural Development of PRC · 2019
49. Eco-friendly building materials containing micronized expanded vermiculite and phase change material for solar based thermo-regulation applications[J]10.1016/j.conbuildmat.2021.125062 ↗
50. A novel energy-effective and carbon-emission reducing mortars with bottom ash and phase change material: Physico-mechanical and thermal energy storage characteristics[J]
51. Glass fiber reinforced gypsum composites with microencapsulated PCM as novel building thermal energy storage material[J]10.1016/j.conbuildmat.2022.127788 ↗
52. Silica fume/capric acid-stearic acid PCM included-cementitious composite for thermal controlling of buildings: Thermal energy storage and mechanical properties[J]10.1016/j.energy.2020.119588 ↗
53. Thermal management performance and mechanical properties of a novel cementitious composite containing fly ash/lauric acid-myristic acid as form-stable phase change material[J]10.1016/j.conbuildmat.2020.122105 ↗
54. Evaluation of pumice for development of low-cost and energy-efficient composite phase change materials and lab-scale thermoregulation performances of its cementitious plasters[J]10.1016/j.energy.2020.118242 ↗
55. Thermal energy storage properties and laboratory-scale thermoregulation performance of bentonite/paraffin composite phase change material for energy-efficient buildings[J]10.1061/(ASCE)MT.1943-5533.0001775 ↗
56. Preparation, characterization and thermal properties of Lauryl alcohol/Kaolin as novel form-stable composite phase change material for thermal energy storage in buildings[J]10.1016/j.applthermaleng.2013.05.015 ↗