journal article·2023-07

Corrosion products of low-alloy steel bars and their induction of cracking in seawater sea-sand concrete cover

Du Pan, Ditao Niu, Zongjin Li

Publisher page

Abstract

The integration of low-alloy steel reinforcement (LS) with seawater sea-sand concrete (SSC) offers an opportunity for marine infrastructure construction that utilizes local resources, such as seawater and sea-sand, while ensuring exceptional durability of structures in challenging environments. However, the cracking of the concrete cover resulting from rebar corrosion remains the primary factor contributing to the deterioration of reinforced-concrete structures exposed to marine environments. In this study, an external current was applied to accelerate the corrosion process of both LS and ordinary steel bars (OS), which were embedded in SSC that was shallowly buried in a wet-salt sand environment. To accurately determine the timing and location of SSC cover cracking, Digital Image Correlation (DIC) technology was utilized. Microscopic analysis was conducted to examine the morphology, phase composition, and content of each component of the corrosion products. Then, the expansion coefficients of the corrosion products of the rebars embedded in SSC with different water–binder ratios were determined. The results indicated that the primary corrosion products formed on OS are α-FeOOH, β-FeOOH, γ-FeOOH, Fe 2O 3, and Fe 3O 4, which form a porous structure. In comparison, corrosion products of LS are fundamentally similar to those of OS but include Cr 2O 3, producing a compact rust layer for better steel protection. Furthermore, the corrosion products of LS exhibit a lower expansion coefficient compared to those of OS in SSC with an identical water–binder ratio. Finally, the cracking time of the SSC cover, as determined through DIC, was validated through the use of a conventional prediction model.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete Corrosion and Durability · Corrosion Behavior and Inhibition · Infrastructure Maintenance and Monitoring

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. Reducing the global environmental impacts of rapid infrastructure expansion10.1016/j.cub.2015.02.050 ↗
2. Hydration characteristics and microstructure of alkali-activated slag concrete: A review10.1016/j.eng.2021.07.026 ↗
3. Development and mechanical behaviour of ultra-high-performance seawater sea-sand concrete10.1177/1369433219858291 ↗
4. Discussion and experiments on the limits of chloride, sulphate and shell content in marine fine aggregates for concrete10.1016/j.conbuildmat.2017.10.078 ↗
5. Y.L. Li X.L. Zhao R. k. Singh Raman, Mechanical properties of seawater and sea sand concrete-filled FRP tubes in artificial seawater Constr. Build. Mater. 191 (2018) 977 993 10.1016/j.conbuildmat.2018.10.059.10.1016/j.conbuildmat.2018.10.059 ↗
6. Mechanical properties of alkali-activated slag concrete mixed by seawater and sea sand10.1016/j.conbuildmat.2018.11.113 ↗
7. Use of sea-sand and seawater in concrete construction: Current status and future opportunities10.1016/j.conbuildmat.2017.08.130 ↗
8. Influence of chloride concentration and pre-passivation on the pitting corrosion resistance of low-alloy reinforcing steel in simulated concrete pore solution10.1016/j.conbuildmat.2016.02.107 ↗
9. Corrosion behavior of Cr modified HRB400 steel rebar in simulated concrete pore solution10.1016/j.conbuildmat.2015.05.073 ↗
10. Initial-corrosion condition behavior of the Cr and Al alloy steel bars in coral concrete for marine construction10.1016/j.cemconcomp.2021.104051 ↗
11. Corrosion behavior of low alloy steel bars containing Cr and Al in coral concrete for ocean construction10.1016/j.conbuildmat.2020.119564 ↗
12. The influence of chromium content on the electrochemical behavior of weathering steels10.1016/j.corsci.2013.03.002 ↗
13. Application of digital image correlation to study the influence of the water/cement ratio on the interfacial transition zone in cement-based materials10.1016/j.conbuildmat.2022.130167 ↗
14. Damage source and its evolution of ultra-high performance concrete monitoring by digital image correlation and acoustic emission technologies
15. Monitoring the failure process of cemented paste backfill at different curing times by using a digital image correlation technique10.1016/j.conbuildmat.2022.128487 ↗
16. Study of the influence of seawater and sea sand on the mechanical and microstructural properties of concrete
17. Study of the rust penetration and circumferential stresses in reinforced concrete at early stages of an accelerated corrosion test by means of combined SEM, EDS and strain gauges10.1016/j.conbuildmat.2018.06.195 ↗
18. Microstructural behaviour and shrinkage properties of high-strength fiber-reinforced seawater sea-sand concrete10.1016/j.conbuildmat.2021.126222 ↗
19. Lateral displacement of RC beams under simultaneous load and steel corrosion10.1016/j.conbuildmat.2009.08.005 ↗
20. The behavior of chromium and molybdenum in the propagation process of localized corrosion of steels10.1016/0010-938X(84)90059-3 ↗
21. Optimize Ni, Cu, Mo element of low Cr-steel rebars in tropical marine atmosphere environment through two years of corrosion monitoring10.1016/j.cemconcomp.2021.104317 ↗
22. Long-term electrochemical behavior of low-alloy steel in simulated concrete pore solution with chlorides10.1061/(ASCE)MT.1943-5533.0002194 ↗
23. An X-ray photo-electron spectroscopic study on the role of molybdenum in increasing the corrosion resistance of ferritic stainless steels in HCl10.1016/0010-938X(79)90003-9 ↗
24. The role of alloyed molybdenum in the inhibition of pitting corrosion in stainless steels10.1016/S0010-938X(00)00086-X ↗
25. The role of corrosion-resistant alloying elements in passivity10.1016/j.corsci.2006.05.003 ↗
26. Effect of Mo and Cr additions on the microstructure, mechanical properties and pitting corrosion resistance of austenitic Fe-30Mn-10.5Al-1.1C lightweight steels10.1016/j.jallcom.2018.10.253 ↗
27. Insight into the product film formed on Ni-advanced weathering steel in a tropical marine atmosphere10.1016/j.apsusc.2017.12.018 ↗
28. Composition and expansion coefficient of rust based on X-ray diffraction and thermal analysis10.1016/j.corsci.2011.01.007 ↗
29. Chloride-induced corrosion products of steel in cracked-concrete subjected to different loading conditions10.1016/j.cemconres.2008.11.001 ↗
30. A model for prediction of time from corrosion initiation to corrosion cracking10.1016/j.cemconcomp.2006.11.004 ↗
31. Reinforcement corrosion-induced cover cracking and its time prediction for reinforced concrete structures10.1016/j.corsci.2010.12.026 ↗
32. Modeling the amount of steel corrosion at the cracking of concrete cover10.1260/136943306778827556 ↗
33. Damage analysis and cracking model of reinforced concrete structures with rebar corrosion10.1016/j.corsci.2011.06.018 ↗
34. Timoshenko · 1970