journal article·2023-08

Mechanical properties and pore structure of 3D printed mortar with recycled powder

Shaodan Hou, Zhenhua Duan, Taohua Ye, Shuai Zou, Jianzhuang Xiao

Publisher page

Abstract

This study investigated the hardened mechanical properties of 3D printed mortar (3DPM) with different contents (0–30% by mass of cement) of recycled powder (RP) by anisotropic compressive, splitting tensile and flexural strengths. The pore characteristics tested by X-ray computed tomography and mercury intrusion porosimeter as well as hydration products of 3DPM were analyzed to reveal the influence mechanism of RP on 3DPM. The results showed that the highest compressive strength of the 3D printed specimens was obtained on the loading direction paralleled with the length of printing filament (X direction). When the RP replacement ratio was 20%, the X-direction compressive strength of 3DPM was 24.11% lower than that of cast samples, while the splitting tensile strengths of 3DPM were closed to and the flexural strengths of 3DPM were higher than that of cast samples regardless of the loading directions. This can be attributed to the high fluidity loss rate of 3DPM with RP, leading to the reduction of the surface moisture of interlayer. Besides, more pores at the interlayer and interstrips led to the decrease of mechanical properties. In contrast, the addition of RP had a limited effect on the micro pore structure of the single printed filament without considering the interlayer and interstrip, owing to the secondary hydration and filling effect of RP.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Innovations in Concrete and Construction Materials · Additive Manufacturing and 3D Printing Technologies · BIM and Construction Integration

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. Additive Manufacturing Processes for Infrastructure Construction
2. 3D printing using concrete extrusion: A roadmap for research10.1016/j.cemconres.2018.05.006 ↗
3. A critical review of preparation design and workability measurement of concrete material for largescale 3D printing10.1007/s11709-017-0430-x ↗
4. A review of the current progress and application of 3D printed concrete10.1016/j.compositesa.2019.105533 ↗
5. https://weburbanist.com/2016/05/26/worlds first 3D printed office building unveiled in Dubai).
6. https://3g.k.sohu.com/t/n571254035 (accessed 20220514).
7. A 3D Printed Ready-Mixed Concrete Power Distribution Substation: Materials and Construction Technology10.3390/ma12091540 ↗
8. Rheological test methods for the characterization of extrudable cement-based materials - A review10.1617/14191 ↗
9. 3D concrete printing: A lower bound analytical model for buildability performance quantification10.1016/j.autcon.2019.102904 ↗
10. Rheological requirements for printable concretes10.1016/j.cemconres.2018.04.005 ↗
11. Early age mechanical behaviour of 3D printed concrete: Numerical modelling and experimental testing10.1016/j.cemconres.2018.02.001 ↗
12. Effects of layer-interface properties on mechanical performance of concrete elements produced by extrusion-based 3D-printing10.1016/j.conbuildmat.2019.01.235 ↗
13. Hardened properties of 3D printed concrete: The influence of process parameters on interlayer adhesion10.1016/j.cemconres.2019.02.017 ↗
14. Printability and advantages of 3D printing mortar with 100% recycled sand10.1016/j.conbuildmat.2020.121699 ↗
15. On rheology of mortar with recycled fine aggregate for 3D printing10.1016/j.conbuildmat.2021.125312 ↗
16. A review of 3D printed concrete: Performance requirements, testing measurements and mix design10.1016/j.conbuildmat.2020.121745 ↗
17. Mix design concepts for 3D printable concrete: A review10.1016/j.cemconcomp.2021.104155 ↗
18. Mechanical and macrostructural properties of 3D printed concrete dosed with steel fibers under different loading direction10.1016/j.conbuildmat.2022.126616 ↗
19. Study on preparation and mechanical properties of 3D printed concrete with different aggregate combinations10.1016/j.jobe.2022.104282 ↗
20. Printable properties of cementitious material containing copper tailings for extrusion based 3D printing10.1016/j.conbuildmat.2017.12.051 ↗
21. Experimental study on the bond behaviour between steel bars and 3D printed concrete10.1016/j.jobe.2022.104105 ↗
22. Chen, Li, C. Figueiredo, Çopuroğlu, Veer, Schlangen, Limestone and Calcined Clay-Based Sustainable Cementitious Materials for 3D Concrete Printing: A Fundamental Study of Extrudability and Early-Age Strength Development, Applied Sciences. 9 (9) (2019) 1809, 10.3390/app9091809.10.3390/app9091809 ↗
23. Use of by-products for partial replacement of 3D printed concrete constituents; rheology, strength and shrinkage performance10.3221/IGF-ESIS.50.44 ↗
24. Rheological properties and compressive strength of construction and demolition waste-based geopolymer mortars for 3D-Printing10.1016/j.conbuildmat.2022.127114 ↗
25. Fresh and mechanical properties of low-cement mortars for 3D printing10.1016/j.conbuildmat.2022.127644 ↗
26. Utilization of waste materials in a novel mortar–polymer laminar composite to be applied in construction 3D-printing10.1016/j.compstruct.2020.112764 ↗
27. The effects of nanosilica on the fresh and hardened properties of 3D printable mortars10.1016/j.conbuildmat.2021.122574 ↗
28. Improving the 3D printability of high volume fly ash mixtures via the use of nano attapulgite clay10.1016/j.compositesb.2018.11.109 ↗
29. Rheological behavior of high volume fly ash mixtures containing micro silica for digital construction application10.1016/j.matlet.2018.11.131 ↗
30. Study on the essential properties of recycled powders from construction and demolition waste
31. Combined use of recycled powder and recycled coarse aggregate derived from construction and demolition waste in self-compacting concrete10.1016/j.conbuildmat.2020.119323 ↗
32. Effect of recycled powders on the mechanical properties and durability of fully recycled fiber-reinforced mortar10.1016/j.jobe.2021.103574 ↗
33. Mechanical properties of concrete mixed with recycled powder produced from construction and demolition waste10.1016/j.jclepro.2018.03.277 ↗
34. The utilization of eco-friendly recycled powder from concrete and brick waste in new concrete: A critical review10.1016/j.cemconcomp.2020.103807 ↗
35. Drying shrinkage, mechanical and transport properties of sustainable mortar with both recycled aggregate and powder from concrete waste10.1016/j.jobe.2022.104048 ↗
36. Rheological properties of mortar containing recycled powders from construction and demolition wastes10.1016/j.conbuildmat.2019.117622 ↗
37. Hardened properties of high-performance printing concrete10.1016/j.cemconres.2011.12.003 ↗
38. Mechanical anisotropy of aligned fiber reinforced composite for extrusion-based 3D printing10.1016/j.conbuildmat.2019.01.008 ↗
39. Hardened properties of layered 3D printed concrete with recycled sand10.1016/j.cemconcomp.2020.103724 ↗
40. Anisotropic behavior in bending of 3D printed concrete reinforced with fibers10.1016/j.compstruct.2020.112808 ↗
41. Layer-interface properties in 3D printed concrete: Dual hierarchical structure and micromechanical characterization10.1016/j.cemconres.2020.106220 ↗
42. Analysis of the mechanical performance and damage mechanism for 3D printed concrete based on pore structure10.1016/j.conbuildmat.2021.125572 ↗
43. An investigation into the porosity of extrusion-based 3D printed concrete10.1016/j.addma.2020.101740 ↗
44. Relationship between water transport behaviour and interlayer voids of 3D printed concrete10.1016/j.conbuildmat.2022.126731 ↗
45. Microstructural characterization of 3D printed concrete10.1016/j.jobe.2021.102948 ↗
46. Fresh properties of 3D printed mortar with recycled powder10.1016/j.conbuildmat.2021.125186 ↗
47. B. Panda, N.A. Noor Mohamed, S.C. Paul, G. Bhagath Singh, M.J. Tan, B. Šavija, The Effect of Material Fresh Properties and Process Parameters on Buildability and Interlayer Adhesion of 3D Printed Concrete, Materials. 12 (13) (2019) 2149, 10.3390/ma12132149.10.3390/ma12132149 ↗
48. Improvement on the properties of waste glass mortar with nanomaterials10.1016/j.conbuildmat.2020.118973 ↗