journal article·2023-09Open access

Short-term durability of GFRP stirrups under wet-dry and freeze–thaw cycles

Milad Shakiba, Amirhossein Hajmoosa, Mussa Mahmoudi, Milad Bazli, Mohsen Ebrahimzadeh

Abstract

GFRP stirrups are a promising alternative to conventional steel stirrups due to their non-corrosive nature. However, their performance under cyclic exposure to wet-dry and freeze–thaw conditions in seawater needs to be evaluated to ensure their long-term durability and sustainability. This study investigates the tensile strength of glass fibre reinforced polymer (GFRP) stirrups under seawater wet-dry cycles and seawater and tap water freeze–thaw cycles. In total, 220 stirrups in two different shapes, i.e. U and L shapes, and two different diameters, i.e. 6 mm and 8 mm were manufactured, conditioned, and tested under stirrup tensile test. Conditioned stirrups were subjected to 9 months and 18 months wet-dry cycles in seawater at 25 ℃, 40 ℃, and 60 ℃, and 9 months and 18 months freeze–thaw cycles in seawater and tap water. At first, the samples underwent a fast deterioration rate, which then decreased as the conditioning period progressed from 9 months to 18 months. The strength retention values of L-shaped stirrups were found to be higher than those of U-shaped stirrups, regardless of the environmental conditions or diameter. The maximum tensile strength reductions of 31%, 28% and 16% were observed, respectively after exposure to 18 months conditioning in seawater wet-dry cycles at 60 ℃, freeze–thaw in seawater, and freeze–thaw in tap water.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Structural Behavior of Reinforced Concrete · Innovative concrete reinforcement materials · Mechanical Behavior of Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (75)

Show source-provided references
1. Fibre-reinforced polymer reinforced concrete members under elevated temperatures: a review on structural performance10.3390/polym14030472 ↗
2. Experimental investigation of residual flexural capacity of damaged reinforced concrete beams exposed to elevated temperatures10.1016/j.engstruct.2021.112388 ↗
3. Bond between Fibre-Reinforced Polymer Tubes and Sea Water Sea Sand Concrete: Mechanisms and Effective Parameters: Critical Overview and Discussion10.3390/fib10010008 ↗
4. Residual flexural capacity of pre-cracked RC beams exposed to chloride penetration at the sea surface temperature10.1016/j.conbuildmat.2022.128126 ↗
5. Performance of glued-in rod timber joints under seawater and UV exposure cycles10.1016/j.conbuildmat.2022.126418 ↗
6. Effect of thermal cycles on mechanical response of pultruded glass fiber reinforced polymer profiles of different geometries10.1016/j.compstruct.2019.110959 ↗
7. Hybrid fibre reinforced polymer and seawater sea sand concrete structures: A systematic review on short-term and long-term structural performance10.1016/j.conbuildmat.2021.124335 ↗
8. Durability of tubular sea water sea sand concrete and fibre-reinforced polymer hybrid structures: Mechanisms and effective parameters: Critical overview and discussion10.1016/j.conbuildmat.2022.130206 ↗
9. Effect of mat anchorage on flexural bonding strength between concrete and sand coated GFRP bars10.1016/j.compstruct.2021.114339 ↗
10. Study on the durability of GFRP bars and carbon/glass hybrid fiber reinforced polymer (HFRP) bars aged in alkaline solution10.1016/j.compstruct.2020.113285 ↗
11. Degradation of glass fiber reinforced polymer (GFRP) bars in concrete environment10.1016/j.conbuildmat.2021.123451 ↗
12. Enhancement of punching strength in GFRP reinforced single footings by means of handmade GFRP shear bands10.1016/j.engstruct.2022.114349 ↗
13. Enhancement of the bond behaviour between sand coated GFRP bar and normal concrete using innovative composite anchor heads10.1617/s11527-022-02074-9 ↗
14. Durability of glass-fibre-reinforced polymer composites under seawater and sea-sand concrete coupled with harsh outdoor environments10.1177/1369433220947897 ↗
15. FRP-confined concrete under axial cyclic compression10.1016/j.cemconcomp.2006.07.007 ↗
16. Effect of sustained load and seawater and sea sand concrete environment on durability of basalt-and glass-fibre reinforced polymer (B/GFRP) bars10.1016/j.corsci.2018.04.002 ↗
17. Using four-point flexure test to investigate effects of temperature and bar size on the tensile properties of GFRP bars10.1016/j.polymertesting.2022.107627 ↗
18. Theoretical model for seawater and sea sand concrete-filled circular FRP tubular stub columns under axial compression10.1016/j.engstruct.2018.01.017 ↗
19. Durability of seawater and sea sand concrete filled filament wound FRP tubes under seawater environments10.1016/j.compositesb.2020.108409 ↗
20. Mechanical properties of pultruded GFRP profiles under seawater sea sand concrete environment coupled with UV radiation and moisture10.1016/j.conbuildmat.2020.120369 ↗
21. Strength degradation in curved Fiber-reinforced Polymer (FRP) bars used as concrete reinforcement10.3390/polym12081653 ↗
22. Imjai · 2007
23. Characterization and comparative durability study of glass/vinylester, basalt/vinylester, and basalt/epoxy FRP bars10.1061/(ASCE)CC.1943-5614.0000564 ↗
24. Accelerated aging tests for evaluations of durability performance of FRP reinforcing bars for concrete structures10.1016/j.compstruct.2005.08.015 ↗
25. Environmental impact on the durability of FRP reinforcing bars
26. Laboratory assessment and durability performance of vinyl-ester, polyester, and epoxy glass-FRP bars for concrete structures10.1016/j.compositesb.2017.02.002 ↗
27. Durability performance and long-term prediction models of sand-coated basalt FRP bars10.1016/j.compositesb.2018.08.065 ↗
28. Bar size effect on long-term durability of sand-coated basalt-FRP composite bars10.1016/j.compositesb.2020.108059 ↗
29. Durability of FRP bars and FRP bar reinforced seawater sea sand concrete structures in marine environments10.1016/j.conbuildmat.2022.128898 ↗
30. Bond durability of FRP bars embedded in fiber-reinforced concrete10.1061/(ASCE)CC.1943-5614.0000270 ↗
31. Flexural durability of FRP bars embedded in fiber-reinforced-concrete10.1016/j.conbuildmat.2013.02.065 ↗
32. The state-of-the-art study on durability of FRP reinforced concrete with seawater and sea sand
33. A review on mechanical properties and deterioration mechanisms of FRP bars under severe environmental and loading conditions10.1016/j.cemconcomp.2022.104758 ↗
34. Bond between Sand-Coated GFRP Bars and Normal-Strength, Self-Compacting, and Fiber-Reinforced Concrete under Seawater and Alkaline Solution10.1061/JCCOF2.CCENG-3987 ↗
35. Effect of freeze-thaw cycles on the bond durability between fibre reinforced polymer plate reinforcement and concrete10.1139/l00-031 ↗
36. Bond strength of CFRP–concrete elements under freeze–thaw cycles10.1016/j.compstruct.2009.09.044 ↗
37. Bond strength of different strengthening systems–Concrete elements under freeze–thaw cycles and salt water immersion exposure10.1016/j.conbuildmat.2014.07.039 ↗
38. Bond durability of basalt-fiber-reinforced-polymer bars embedded in lightweight aggregate concrete subjected to freeze–thaw cycles10.1002/suco.202100007 ↗
39. Effect of polyolefin macro fibers and handmade GFRP anchorage system on improving the bonding behavior of GFRP bars embedded in self-compacting lightweight concrete10.1016/j.conbuildmat.2020.119230 ↗
40. Influence of elevated temperatures on the bond behaviour of ribbed GFRP bars in concrete10.1016/j.cemconcomp.2021.104119 ↗
41. Bond-slip behaviour between FRP tubes and seawater sea sand concrete10.1016/j.engstruct.2019.109421 ↗
42. Bond performance between FRP tubes and seawater sea sand concrete after exposure to seawater condition10.1016/j.conbuildmat.2020.120342 ↗
43. Bond durability between anchored GFRP bar and seawater concrete under offshore environmental conditions10.1617/s11527-023-02153-5 ↗
44. Durability test on the flexural performance of seawater sea-sand concrete beams completely reinforced with FRP bars10.1016/j.conbuildmat.2018.10.166 ↗
45. The durability of seawater sea-sand concrete beams reinforced with metal bars or non-metal bars in the ocean environment10.1177/1369433219870580 ↗
46. Effect of sustained load and seawater and sea sand concrete environment on durability of basalt- and glass-fibre reinforced polymer (B/GFRP) bars10.1016/j.corsci.2018.04.002 ↗
47. Durability study of concrete-covered basalt fiber-reinforced polymer (BFRP) bars in marine environment10.1016/j.compstruct.2019.111650 ↗
48. Durability issues of FRP rebars in reinforced concrete members10.1016/j.cemconcomp.2006.07.004 ↗
49. Bond-slip performance of GFRP and steel reinforced beams under wet-dry and freeze-thaw cycles: The effect of concrete type10.1016/j.conbuildmat.2022.127916 ↗
50. Effect of harsh environments on mechanical properties of GFRP pultruded profiles10.1016/j.compositesb.2016.06.019 ↗
51. Experiments and probabilistic models of bond strength between GFRP bar and different types of concrete under aggressive environments10.1016/j.conbuildmat.2017.05.046 ↗
52. Effect of sequential exposure to UV radiation and water vapor condensation and extreme temperatures on the mechanical properties of GFRP bars10.1061/(ASCE)CC.1943-5614.0000828 ↗
53. Durability of pultruded GFRP tubes subjected to seawater sea sand concrete and seawater environments10.1016/j.conbuildmat.2020.118399 ↗
54. Effects of UV radiation, moisture and elevated temperature on mechanical properties of GFRP pultruded profiles10.1016/j.conbuildmat.2019.117137 ↗
55. Durability of Fibre-reinforced polymer-wood composite members: An overview10.1016/j.compstruct.2022.115827 ↗
56. Bond-slip behaviour between GFRP/steel bars and seawater concrete after exposure to environmental conditions10.1016/j.engstruct.2022.114796 ↗
57. Creep and durability of sand-coated glass FRP bars in concrete elements under freeze/thaw cycling and sustained loads10.1016/j.cemconcomp.2006.07.014 ↗
58. Flexural and web crippling properties of GFRP pultruded profiles subjected to wetting and drying cycles in different sea water conditions10.1016/j.polymertesting.2018.05.038 ↗
59. Effect of fibers configuration and thickness on tensile behavior of GFRP laminates exposed to harsh environment10.3390/polym11091401 ↗
60. Durability of FRP rods for concrete structures10.1016/j.conbuildmat.2004.04.012 ↗
61. Short-term durability test for GFRP rods under various environmental conditions10.1016/j.compstruct.2007.03.005 ↗
62. Reynaud, Durability gap analysis for fiber-reinforced polymer composites in civil infrastructure10.1061/(ASCE)1090-0268(2003)7:3(238) ↗
63. Effects of moisture on the long-term performance of adhesively bonded FRP/steel joints used in bridges10.1016/j.compositesb.2016.02.021 ↗
64. Wet lay-up manufactured FRPs for concrete and masonry repair: influence of water on the properties of composites and on their epoxy components10.1061/(ASCE)CC.1943-5614.0000132 ↗
65. A case study on the feasibility of using static-cast fibre-reinforced concrete electric poles fully reinforced with glass fibre reinforced polymer bars and stirrups10.1016/j.rineng.2022.100746 ↗
66. Feasibility of using Static-Cast Concrete Transmission Poles fully reinforced with glass-fibre reinforced polymer bars and stirrups: A case study
67. Bond properties of FRP-concrete interface with nano-modified epoxy resin under wet-dry cycles10.1007/s12205-016-0921-7 ↗
68. Effect of harsh environmental conditions on the tensile properties of GFRP bars10.1016/j.compositesb.2012.05.004 ↗
69. Temperature as an accelerating factor for long-term durability testing of FRPs: Should there be any limitations?10.1061/(ASCE)CC.1943-5614.0000102 ↗
70. American Society of Testing and Materials Annual Book of ASTM Standards ASTM, West Conshohocken, PA (1998).
71. ACI, ACI-440.3R, Guide test methods for fibre-reinforced polymers (FRPs) for reinforcing or strengthening concrete structures, ACI Committee 440, Farmington Hills, M1 (2012). 2012.
72. ACI (American Concrete Institute). (2015). “Guide for the design and construction of concrete reinforced with FRP bars.” ACI 440–1R, Farmington Hills, MI; 2015.
73. Independent environmental effects on durability of fiber-reinforced polymer wraps in civil applications: A review10.1016/j.conbuildmat.2013.06.077 ↗
74. Low-temperature hygrothermal degradation of ambient cured E-glass/vinylester composites10.1002/app.11205 ↗
75. Durability of FRP composite bridge deck materials under freeze-thaw and low temperature conditions10.1061/(ASCE)1084-0702(2006)11:4(443) ↗