Hardened properties and microstructure change of sulphoaluminate cement modified with different doses of styrene-butadiene rubber latex
Source abstract
Abstract
The composite of sulphoaluminate cement (SAC) and styrene-butadiene rubber (SBR) latex is expected to possess rapid strength development and adjustable elastic modulus, mainly used in rush repair engineering. This paper investigates the mechanical strength and drying shrinkage of SBR-SAC composites with different proportions. The change of pore structure, phase composition, and microtopography behind the composites was further revealed. Results indicate that, when the SBR/SAC ratio increases from 0/10 to 3/10, the flexural strength of the composite is increased by 343% and its compressive strength is increased by 14.7%, the drying shrinkage is almost not considered, below 0.1%. Besides, at the SBR/SAC ratio of 5/10, the composite loses brittleness, with no obvious peak value of load–displacement curves, and the drying shrinkage of composite at 23 d is 1.496%. This is because dehydrated polymer occupies the location of SAC hydrates, and the polymer film gradually and continuously covers the surface of the cement and becomes thickened. With the increasing SBR/SAC ratio, the continuous phase of composite probably transforms from inorganic cement phase to organic polymer phase.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Concrete Properties and Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. Plasma-functionalized graphene fiber reinforced sulphoaluminate cement-based grouting materials10.1016/j.ceramint.2021.02.104 ↗
2. Shrinkage and creep of high-performance concrete based on calcium sulfoaluminate cement10.1016/j.cemconcomp.2019.02.006 ↗
3. Mechanical properties and durability of rubberized and SBR latex modified rubberized concrete10.1016/j.conbuildmat.2020.118584 ↗
4. Mechanical characterization of low modulus polymer-modified calcium-silicate-hydrate (C–S–H) binder10.1016/j.cemconcomp.2021.104219 ↗
5. Mechanical behaviour of polymer-modified ferrocement under different exposure conditions: An experimental study10.1016/j.compositesb.2011.11.058 ↗
6. Effects of polymer modification on the permeability of cement mortars under different curing conditions: A correlational study that includes pore distributions, water absorption and compressive strength10.1016/j.conbuildmat.2011.09.004 ↗
7. Analysis on mechanical characteristics of CRTSII slab ballastless track structures in rectification considering material brittleness10.1016/j.conbuildmat.2021.126058 ↗
8. Numerical study on the pipe flow characteristics of grouting repairing pastes used in slab track10.1016/j.conbuildmat.2021.126214 ↗
9. Feasibility analysis of magnesium phosphate cement as a repair material for base slab of China railway track system II ballastless track10.1016/j.conbuildmat.2022.126821 ↗
10. SBR latex modified mortar rheology and mechanical behaviour10.1016/j.cemconres.2003.09.006 ↗
11. Effect of styrene-butadiene rubber latex on the rheological behavior and pore structure of cement paste10.1016/j.compositesb.2018.11.017 ↗
12. Polymer-based admixtures10.1016/S0958-9465(97)00065-6 ↗
13. Physical and mechanical properties of styrene–butadiene rubber emulsion modified cement mortars10.1016/j.cemconres.2004.07.012 ↗
14. Development and use of polymer-modified cement for adhesive and repair applications10.1016/j.conbuildmat.2017.12.103 ↗
15. Z. Bahranifard, F. Farshchi Tabrizi, A.R. Vosoughi, An investigation on the effect of styrene-butyl acrylate copolymer latex to improve the properties of polymer modified concrete, Constr. Build. Mater. 205 (2019) 175–185. 10.1016/j.conbuildmat.2019.01.175.10.1016/j.conbuildmat.2019.01.175 ↗
16. Influence of humidity on the mechanical properties of polymer-modified cement-based repair materials10.1016/j.conbuildmat.2020.119928 ↗
17. Influence of SBR latex and HPMC on the cement hydration at early age
18. From microstructure to macrostructure: an integrated model of structure formation in polymer-modified concrete10.1007/BF02481591 ↗
19. Effect of styrene–butadiene rubber latex on the chloride permeability and microstructure of Portland cement mortar10.1016/j.conbuildmat.2008.11.011 ↗
20. Influence of carboxylated styrene–butadiene latex copolymer on Portland cement hydration10.1016/j.cemconcomp.2015.06.004 ↗
21. Retardation and bridging effect of anionic polyacrylamide in cement paste and its relationship with early properties10.1016/j.conbuildmat.2021.124822 ↗
22. Comparative study on the early properties of cement modified with different ionic polyacrylamides10.1016/j.conbuildmat.2022.127671 ↗
23. Effect of PCEs with different structures on hydration and properties of cementitious materials with low water-to-binder ratio10.1016/j.cemconres.2020.106343 ↗
24. The roles of water-soluble polymers in cement-based materials: A systematic review
25. Understanding the impact of polyacrylamide molecular weight on the workability of cement paste10.1016/j.cemconcomp.2023.105171 ↗
26. Investigation on mechanical and durability properties of polymer and latex-modified concretes10.1016/j.conbuildmat.2018.09.198 ↗
27. Mechanical properties of polymer-modified lightweight aggregate concrete10.1016/S0008-8846(01)00678-0 ↗
28. Mechanical characterization of a styrene–butadiene modified mortar10.1016/S0921-5093(00)01980-8 ↗
29. Styrene-butadiene polymer action on compressive and tensile strengths of cement mortars10.1617/s11527-007-9324-z ↗
30. Effect of Styrene Butadiene Copolymer (SBR) admixture on high strength concrete10.1016/j.conbuildmat.2016.02.204 ↗
31. Effect of recycled acrylic-based polymers on bond stress-slip behavior in reinforced concrete structures10.1061/(ASCE)MT.1943-5533.0001700 ↗
32. Influence of polymer latex on the setting time, mechanical properties and durability of calcium sulfoaluminate cement mortar10.1016/j.conbuildmat.2018.03.005 ↗
33. Effects of SAE and SBR on properties of rapid hardening repair mortar
34. Early performance of styrene-butadiene rubber latex-sulphoaluminate cement composite with high content
35. Rheological behaviour of low-heat Portland cement paste with MgO-based expansive agent and shrinkage reducing admixture10.1016/j.conbuildmat.2021.124583 ↗
36. Utilization of novel stranded steel fiber to enhance fiber–matrix interface of cementitious composites10.1016/j.conbuildmat.2023.130525 ↗
37. Properties of a ternary calcium sulfoaluminate–calcium sulfate–fly ash cement10.1016/j.cemconres.2013.09.015 ↗
38. Effect of steel slag on the hydration and strength development of calcium sulfoaluminate cement10.1016/j.conbuildmat.2020.120301 ↗
39. Research on the mechanism of polymer latex modified cement10.1016/j.conbuildmat.2016.02.117 ↗
40. Influences of polypropylene fiber and SBR polymer latex on abrasion resistance of cement mortar10.1007/s11595-010-0057-4 ↗
41. Polymer film formation in cement mortars modified with water-soluble polymers10.1016/j.cemconcomp.2014.11.015 ↗
42. Effect of SBR and XSBRL on water demand, mechanical strength and microstructure of cement paste10.1016/j.conbuildmat.2022.127309 ↗
43. Analysis of mechanical properties of rubberised mortar and influence of styrene–butadiene latex on interfacial behaviour of rubber–cement matrix10.1016/j.conbuildmat.2021.124027 ↗
44. Polymer-modified mortars and concretes
45. Polymer concrete
46. Strength and shrinkage properties of mortar containing a nonstandard high-calcium fly ash10.1016/S0008-8846(03)00247-3 ↗
47. Drying shrinkage performance of Medium-Ca alkali-activated fly ash and slag pastes10.1016/j.cemconcomp.2022.104536 ↗
48. Natural hydraulic lime for blended cement mortars: Behavior from fresh to hardened states10.1016/j.cemconres.2019.03.003 ↗
49. Interaction between drying, shrinkage, creep and cracking phenomena in concrete10.1016/j.engstruct.2004.09.012 ↗
50. Drying shrinkage behavior of cement mortar under low vacuum conditions10.1016/j.conbuildmat.2023.130933 ↗
51. Effect of heat treatment on the pore structure and drying shrinkage behavior of hydrated cement paste10.1111/j.1151-2916.2002.tb00450.x ↗
52. Microstructural changes of young cement paste due to moisture transfer at low air pressures10.1016/j.cemconres.2022.107061 ↗
53. Effect of calcium sulfate source on the hydration of calcium sulfoaluminate eco-cement10.1016/j.cemconcomp.2014.08.003 ↗
54. Performance of belite–sulfoaluminate cements10.1016/S0008-8846(01)00543-9 ↗
55. Hydration of calcium sulfoaluminate cements — Experimental findings and thermodynamic modelling10.1016/j.cemconres.2009.08.014 ↗