Fresh and hardened state properties, reaction kinetics and microstructure of sodium sulfate/sodium hydroxide – Activated slag mixtures
Source abstract
Abstract
This study investigated the impact of incorporating sodium hydroxide (NaOH) on the properties of ground granulated blast furnace slag (GGBFS) activated by sodium sulfate (Na2SO4). Specifically, the rheological properties, setting behavior, reaction kinetics, mechanical performance, and microstructure of the mixtures were examined. Results indicated that using only Na2SO4 as the activator resulted in mixtures with long setting times and no compressive strength at early ages. However, the addition of NaOH to the Na2SO4 activator significantly improved the reaction kinetics of the GGBFS. By optimizing ratio between NaOH and Na2SO4, mixtures with improved workability, faster structuration, reasonable setting times, and desirable mechanical properties were achieved. The superior mechanical properties were attributed to a well-packed microstructure consisting of C -(A)-S-H, ettringite, and hydrotalcite in the binary NaOH-Na2SO4 activator systems.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications · Recycling and utilization of industrial and municipal waste in materials production
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (79)
Show source-provided references
1. RILEM-TC 224-AAM, Alkali Activated Materials. 2014. doi: 10.1007/978-94-007-7672-2.10.1007/978-94-007-7672-2 ↗
2. Recent progress in low-carbon binders10.1016/j.cemconres.2019.05.009 ↗
3. 2006
4. Geopolymers and other alkali activated materials: why, how, and what ?10.1617/s11527-013-0211-5 ↗
5. J. Davidovits, Geopolymer chemistry and applications, no. January 2008. 2008.
6. Effects of activator properties and GGBFS/FA ratio on the structural build-up and rheology of AAC
7. Mechanical and microstructural properties of heat cured alkali-activated slag mortars10.1016/j.matdes.2011.10.005 ↗
8. Factors affecting the strength of alkali-activated slag10.1016/0008-8846(94)90026-4 ↗
9. Effect of activator type and content on properties of alkali-activated slag mortars10.1016/j.compositesb.2013.10.001 ↗
10. Hydration and properties of sodium sulfate activated slag10.1016/j.cemconcomp.2012.12.010 ↗
11. “Sodium Sulphate Activated GGBS/PFA and Its Potential as a Nuclear Waste Immobilisation Matrix”, MRS Online Proceedings
12. Characterisation of Ba(OH)2-Na2SO4-blast furnace slag cement-like composites for the immobilisation of sulfate bearing nuclear wastes10.1016/j.cemconres.2014.07.006 ↗
13. Gamma irradiation resistance of early age Ba (OH)2 -Na2SO4 -slag cementitious grouts10.1016/j.jnucmat.2016.10.032 ↗
14. Chemical and mechanical stability of sodium sulfate activated slag after exposure to elevated temperature10.1016/j.cemconres.2011.10.007 ↗
15. Structural evolution of an alkali sulfate activated slag cement10.1016/j.jnucmat.2015.11.016 ↗
16. The investigation on properties of sodium sulfate-activated mortar incorporating steel slag with various replacement ratio and particle size
17. Alkali-Sulfate Activated Blended Portland Cements
18. Influence of different additives on the properties of sodium sulfate activated slag10.1016/j.conbuildmat.2015.01.022 ↗
19. Mechanisms of enhancement in early hydration by sodium sulfate in a slag- cement blend – Insights from pore solution chemistry10.1016/j.cemconres.2020.106110 ↗
20. Effect of NaOH content on hydration, mineralogy, porosity and strength in alkali/sulfate-activated binders from ground granulated blast furnace slag and phosphogypsum
21. Low carbon cementitious materials: Sodium sulfate activated ultra-fine slag/fly ash blends at ambient temperature10.1016/j.jclepro.2020.124363 ↗
22. Influence of limestone addition on sodium sulphate activated blast furnace slag cements
23. Effect of reactive MgO on hydration and properties of alkali-activated slag pastes with different activators10.1016/j.conbuildmat.2020.121608 ↗
24. Portland cement-blast furnace slag mortars activated using waterglass : – Part 1: Effect of slag replacement and alkali concentration10.1016/j.conbuildmat.2012.07.041 ↗
25. Effect of calcium hydroxide on fresh state behavior of sodium carbonate activated blast furnace slag pastes10.1016/j.conbuildmat.2019.03.328 ↗
26. Alkali-activated slag cements: present and future (Spanish)10.3989/mc.1995.v45.i239.553 ↗
27. Effect of Ca(OH)2 Addition on the Engineering Properties of Sodium Sulfate Activated Slag10.3390/ma14154266 ↗
28. Enhancing thixotropy and structural build-up of alkali- activated slag/fly ash pastes with nano clay10.1617/s11527-021-01760-4 ↗
29. BS EN 196-3:2005 +A1:2008 Methods of testing cement — Part 3: Determination of setting times and soundness, vol. 3, no. August. 2003.
30. Estimating rheological properties of cement pastes using various rheological models for different test geometry, gap and surface friction10.1016/j.cemconres.2004.02.020 ↗
31. Applicability of rheological models to high-performance grouts containing supplementary cementitious materials and viscosity enhancing admixture10.1007/BF02481066 ↗
32. Use of oscillatory shear to study flow behavior of fresh cement paste10.1016/0008-8846(93)90092-N ↗
33. Rheological characterization of the viscoelastic solid-like properties of fresh cement pastes with nanoclay addition
34. Extension of the Reiner – Riwlin equation to determine modified Bingham parameters measured in coaxial cylinders rheometers10.1617/s11527-012-9902-6 ↗
35. EUROPEAN COMMITTEE FOR STANDARDIZATION, EN 1015-11:Methods of test for mortar for masonry - Part 11: Determination of flexural and compressive strength of hardened mortar. 2019.
36. RILEM TC - 238 SCM Recommendation on hydration stoppage by solvent exchange for the study of hydrate assemblages10.1617/s11527-018-1298-5 ↗
37. Pore structure description of mortars containing ground granulated blast-furnace slag by mercury intrusion porosimetry and dynamic vapour sorption10.1016/j.conbuildmat.2017.03.245 ↗
38. Rheological and mechanical properties of 3D printable alkali-activated slag mixtures with addition of nano clay10.1016/j.cemconcomp.2023.104995 ↗
39. Accelerating the reaction process of sodium carbonate-activated slag mixtures with the incorporation of a small addition of sodium hydroxide/sodium silicate10.1016/j.cemconcomp.2023.105118 ↗
40. Influence of water to binder ratio on the rheology and structural Build-up of Alkali-Activated Slag / Fly ash mixtures10.1016/j.conbuildmat.2020.120253 ↗
41. Recent advances on yield stress and elasticity of fresh cement-based materials10.1016/j.cemconres.2019.105798 ↗
42. The origins of thixotropy of fresh cement pastes10.1016/j.cemconres.2011.09.004 ↗
43. D. Feys, Interacties tussen de reologische eigenschappen en het verpompen van zelfverdichtend beton Interactions between Rheological Properties and Pumping of Self-Compacting Concrete. 2009.
44. Electrostatic repulsion between particles in cement suspensions: Domain of validity of linearized Poisson-Boltzmann equation for nonideal electrolytes10.1016/S0008-8846(02)01059-1 ↗
45. On the measurement of evolution of structural build-up of cement paste with time by static yield stress test vs. small amplitude oscillatory shear test
46. Monitoring the setting process of alkali-activated slag-fly ash cements with ultrasonic P-wave velocity10.1016/j.conbuildmat.2020.121592 ↗
47. Y. Zuo, M. Nedeljković, and G. Ye, “Pore solution composition of alkali-activated slag/fly ash pastes,” Cem Concr Res, vol. 115, no. October 2018, pp. 230–250, 2019, doi: 10.1016/j.cemconres.2018.10.010.10.1016/j.cemconres.2018.10.010 ↗
48. Early Structural Build-up, Setting Behavior, Reaction Kinetics and Microstructure of Sodium Silicate-Activated Slag Mixtures with Different Retarder Chemicals10.1016/j.cemconres.2022.106872 ↗
49. Rheology, early-age hydration and microstructure of alkali-activated GGBFS-Fly ash-limestone mixtures
50. Pore solution chemistry of alkali-activated ground granulated blast-furnace slag10.1016/S0008-8846(98)00212-9 ↗
51. The pore solution of blended cements: a review10.1617/s11527-015-0724-1 ↗
52. Effect of superplasticizers on properties of one-part Ca(OH)2/Na2SO4 activated geopolymer pastes10.1016/j.conbuildmat.2019.117990 ↗
53. Influence of four additional activators on hydrated-lime [Ca(OH) 2 ] activated ground granulated blast-furnace slag10.1016/j.cemconcomp.2015.10.007 ↗
54. Properties of alkali activated slag-fly ash blends with limestone addition10.1016/j.cemconcomp.2015.01.007 ↗
55. A model for the C-A-S-H gel formed in alkali-activated slag cements10.1016/j.jeurceramsoc.2011.04.036 ↗
56. (Micro)-structural comparison between geopolymers, alkali-activated slag cement and Portland cement10.1016/j.jeurceramsoc.2005.12.021 ↗
57. “Modification of phase evolution in alkali-activated blast furnace slag by the incorporation of fly ash”10.1016/j.cemconcomp.2013.09.006 ↗
58. R. Cao, S. Zhang, N. Banthia, Y. Zhang, and Z. Zhang, “Interpreting the early-age reaction process of alkali-activated slag by using combined embedded ultrasonic measurement , thermal analysis , XRD , FTIR and SEM,” Composites Part B, vol. 186, no. November 2019, p. 107840, 2020, doi: 10.1016/j.compositesb.2020.107840.10.1016/j.compositesb.2020.107840 ↗
59. Reaction kinetics, gel character and strength of ambient temperature cured alkali activated slag-fly ash blends10.1016/j.conbuildmat.2015.01.065 ↗
60. Effect of alkali dosage and silicate modulus on carbonation of alkali-activated slag mortars10.1016/j.cemconres.2018.07.005 ↗
61. Carbonation process of alkali-activated
62. FTIR study and cation exchange capacity of Fe3+- and Mg2+-substituted calcium silicate hydrates10.1016/j.jallcom.2008.06.029 ↗
63. Kinetic and thermal decomposition of ettringite synthesized from aqueous solutions10.1007/s10973-016-5259-3 ↗
64. Structural and spectroscopic characterization of ettringite mineral-combined DFT and experimental study10.1016/j.molstruc.2015.06.075 ↗
65. Nano hydrotalcite as a novel catalyst for biodiesel conversion
66. Coupled thermodynamic modelling and experimental study of sodium hydroxide activated slag10.1016/j.conbuildmat.2018.08.087 ↗
67. The AFm phase in Portland cement10.1016/j.cemconres.2006.10.010 ↗
68. The role of the alumina content of slag, plus the presence of additional sulfate on the hydration and microstructure of Portland cement-slag blends10.1016/j.cemconres.2014.07.018 ↗
69. Hydration products of alkali activated slag cement10.1016/0008-8846(95)00045-E ↗
70. Influence of slag chemistry on the hydration of alkali-activated blast-furnace slag - Part II: Effect of Al2O310.1016/j.cemconres.2011.08.005 ↗
71. Compositional, microstructural and mechanical properties of ambient condition cured alkali-activated cement10.1016/j.conbuildmat.2016.03.043 ↗
72. Geopolymer prepared with high-magnesium nickel slag: Characterization of properties and microstructure10.1016/j.conbuildmat.2014.01.038 ↗
73. Multiscale micromechanical analysis of alkali-activated fly ash-slag paste
74. Examination of alkali-activated material nanostructure during thermal treatment10.1007/s10853-018-2270-z ↗
75. Gel composition and molecular structure of alkali-activated metakaolin-limestone cements
76. Compatibility studies between N-A-S-H and C-A-S-H gels. Study in the ternary diagram Na2O-CaO-Al2O3-SiO 2–H2O10.1016/j.cemconres.2011.05.006 ↗
77. Chemo-mechanical properties of alkali-activated slag/fly ash paste incorporating white mud10.1016/j.conbuildmat.2021.123312 ↗
78. Phase diagrams for alkali-activated slag binders10.1016/j.cemconres.2017.02.006 ↗
79. Phase evolution of C-(N)-A-S-H/N-A-S-H gel blends investigated via alkali-activation of synthetic calcium aluminosilicate precursors10.1016/j.cemconres.2016.08.010 ↗