Prediction model and measurement of fracture parameters in eco-friendly coarse copper slag-SFRSCC based on semi-circular bending test
Source abstract
Abstract
This research has used 16 concrete mix designs containing 0.1, 0.3, and 0.5% steel fiber (SF), and 20, 30, 40, 50, and 60% copper slag (CS) to examine their fresh and hardened characteristics, and study their microstructural features with the help of scanning electron microscope (SEM) images. In addition, it has tried to evaluate the fracture characteristics of semi-circular bending (SCB) samples under loading modes I, I/II, II/I, and II. According to the results, increasing CS will improve the fresh concrete properties and reduce the negative SF effects on its performance. At 60% (fixed) CS, using 0.1% SF reduces the compressive strength by 10.08%, and applying 0.5% SF increases it by 17.24%, compared to the control sample. Increasing SF and CS improves the tensile strength of all concretes in the 14.02–86.02% range, compared to the control design. SEM images show that up to 30% replacement, the WCS-steel fiber reinforced self-compacting concrete (SFRSCC) microstructure is homogeneous, integrated and dense, and the fracture toughness and energy are higher under, respectively, pure loading modes II and I than other modes. Fracture toughness of concretes with the highest SF and CS volumes, compared to plain concrete, has increased 1.45, 1.61, 1.67, and 1.36 times under loading modes I, I/II, II/I, and II, respectively. Compared to ANN, using ALK to estimate the fracture features reduces the need for training data by 36.53%, and R 2 (correlation coefficient) reduces by 0.91 and 1.52% for estimating the fracture energy and fracture toughness, respectively. Using ANN and ALK can provide a robust prediction model to estimate the fracture energy parameters of the CS-FRSCCs (R 2 ≥ 0.970).
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Ground copper slag as a supplementary cementing material and its influence on the fresh properties of self-consolidating concrete
2. Fresh properties of self-compacting concrete containing ground waste glass micro-particles as cementing material10.3151/jact.13.50 ↗
3. Effect of copper slag fine aggregate on corrosion processes and behavior in reinforced concrete prism specimen10.1016/j.conbuildmat.2020.121909 ↗
4. A comprehensive review on performance of cementitious and geopolymeric concretes with recycled waste glass as powder, sand or cullet10.1016/j.resconrec.2021.105664 ↗
5. Mechanical properties of copper slag reinforced concrete under dynamic compression10.1016/j.conbuildmat.2009.12.001 ↗
6. Influence of copper slag and metakaolin on the durability of self-compacting concrete10.1016/j.jclepro.2017.10.029 ↗
7. Investigating the mechanical and hydraulic characteristics of pervious concrete containing copper slag as coarse aggregate10.1016/j.conbuildmat.2018.11.230 ↗
8. Environmental protection by using waste copper slag as a coarse aggregate in self-compacting concrete10.1016/j.jenvman.2020.111013 ↗
9. Producing green Roller Compacted Concrete (RCC) using fine copper slag aggregates10.1016/j.jclepro.2022.133005 ↗
10. Self-compacting concrete10.1680/stco.2000.1.1.3 ↗
11. Utilization of waste glass micro-particles in producing self-consolidating concrete mixtures10.1007/s40069-016-0141-z ↗
12. Experimental investigation on effects of calcined bentonite on fresh, strength and durability properties of sustainable self-compacting concrete10.1016/j.conbuildmat.2019.117062 ↗
13. Utilization of micro copper slag in SCC subjected to high temperature
14. Influence of different curing conditions and water to cement ratio on properties of self-compacting concretes10.1016/j.conbuildmat.2019.117570 ↗
15. Durability aspects in self-compacting siderurgical aggregate concrete
16. High Performance Self-Compacting Concrete with Electric Arc Furnace Slag Aggregate and Cupola Slag Powder10.3390/app10030773 ↗
17. Microstructure and Dimensional Stability of Slag-Based High-Workability Concrete with Steelmaking Slag Aggregate and Fibers10.1061/(ASCE)MT.1943-5533.0004372 ↗
18. Validation of slag-binder fiber-reinforced self-compacting concrete with slag aggregate under field conditions: Durability and real strength development10.1016/j.conbuildmat.2021.126280 ↗
19. Durability of high-performance self-compacted concrete using electric arc furnace slag aggregate and cupola slag powder10.1016/j.cemconcomp.2021.104399 ↗
20. The effect of NiTi shape memory alloy, polypropylene and steel fibres on the fresh and mechanical properties of self-compacting concrete10.1016/j.conbuildmat.2019.04.207 ↗
21. Effect of waste glass and curing aging on fracture toughness of self-compacting mortars using ENDB specimen10.1016/j.conbuildmat.2021.122711 ↗
22. Fibre reinforced cement-based (FRC) composites after over 40 years of development in building and civil engineering10.1016/j.compstruct.2008.03.006 ↗
23. Strength and fracture energy characteristics of self-consolidating concrete incorporating polyvinyl alcohol, steel and hybrid fibres10.1016/j.conbuildmat.2013.03.054 ↗
24. Compressive behavior of steel fiber reinforced recycled coarse aggregate concrete designed with equivalent cubic compressive strength10.1016/j.conbuildmat.2017.02.136 ↗
25. Investigating the effects of maximum aggregate size on self-compacting steel fiber reinforced concrete fracture parameters10.1016/j.conbuildmat.2017.11.141 ↗
26. Effects of coarse aggregate and wavy steel fiber volumes on the critical stress intensity factors of modes I and III cracks in self-compacting concrete using ENDB specimens
27. Toughness enhancement in steel fiber reinforced concrete through fiber hybridization10.1016/j.cemconres.2007.05.005 ↗
28. Evaluation of the mechanical behavior of pumice lightweight concrete reinforced with steel and polypropylene fibers10.1016/j.conbuildmat.2018.11.109 ↗
29. Synergistic effects of fly ash and hooked steel fibers on strength and durability properties of high strength recycled aggregate concrete10.1016/j.resconrec.2021.105444 ↗
30. Studying the fracture parameters and size effect of steel fiber-reinforced self-compacting concrete10.1016/j.conbuildmat.2018.12.172 ↗
31. Flexural toughness evaluation of basalt fibre reinforced HPC beams with and without initial notch10.1016/j.compstruct.2019.111769 ↗
32. Mechanical properties of polypropylene hybrid fiber-reinforced concrete10.1016/j.msea.2008.05.037 ↗
33. Polyolefin fiber-reinforced concrete enhanced with steel-hooked fibers in low proportions10.1016/j.matdes.2014.03.050 ↗
34. Fiber type effects on the performance of steel fiber reinforced concrete
35. Fiber-reinforcement and its effects on the mechanical properties of high-workability concretes manufactured with slag as aggregate and binder
36. Microcracking behavior of two semi-circular bend specimens in mode I fracture toughness test10.1016/j.engfracmech.2019.106565 ↗
37. A statistical approach on the support type effect on mode I fracture toughness determined using semi-circular bend (SCB) specimen10.1016/j.engfracmech.2020.106891 ↗
38. Fracture toughness determination of modified HMA mixtures with two novel disc shape configurations10.1016/j.conbuildmat.2017.08.093 ↗
39. Fracture study of concrete composites with synthetic fibers additive under modes I and III using ENDB specimen10.1016/j.conbuildmat.2018.09.149 ↗
40. Evaluating mode I fracture resistance in asphalt mixtures using edge notched disc bend ENDB specimen with different geometrical and environmental conditions10.1016/j.engfracmech.2017.11.007 ↗
41. On predicting mode II fracture toughness (KIIc) of hot mix asphalt mixtures using the strain energy density criterion10.1016/j.tafmec.2018.11.001 ↗
42. Experimental investigation of mode I fracture features of steel fiber-reinforced reactive powder concrete using semi-circular bend test10.1016/j.engfracmech.2019.01.029 ↗
43. On the comparison of two mixed-mode I+III fracture test specimens10.1016/j.engfracmech.2020.107434 ↗
44. Low Temperature Fracture Resistance of Cement Emulsified Asphalt Mortar under Mixed Mode I/III Loading10.1016/j.tafmec.2020.102800 ↗
45. The influence of coarse aggregate size and volume on the fracture behavior and brittleness of self-compacting concrete10.1016/j.cemconres.2014.06.008 ↗
46. Analysis of material size and shape effects for steel fiber reinforcement self-consolidating concrete10.1016/j.engfracmech.2018.11.051 ↗
47. The effect of aging on the fracture characteristics and ductility of self-compacting concrete10.1016/j.matdes.2013.10.066 ↗
48. Application of waste tire rubber and recycled aggregates in concrete products: A new compression casting approach10.1016/j.resconrec.2020.105353 ↗
49. Crack initiation and propagation on CT specimens of two polymers (ABS and PMMA), under cyclic constant displacement loading10.1016/j.tafmec.2018.12.013 ↗
50. Relationship between fatigue parameters and fatigue crack growth in PMMA bone cement10.1016/j.ijfatigue.2018.11.013 ↗
51. The influence of natural and synthetic fibers on low temperature mixed mode I+ II fracture behavior of warm mix asphalt (WMA) materials10.1016/j.engfracmech.2017.06.003 ↗
52. Numerical and experimental investigation of mode I cracking of asphalt concrete using semi-circular bending test10.1016/j.conbuildmat.2018.02.161 ↗
53. New specimen for fracture toughness determination of rock and other materials10.1007/BF01157555 ↗
54. Possibilities of a semi-circular bending test
55. Zhou, Y., Xia, K., Li, X., Li, H., Ma, G., Zhao, J., Zhou, Z., Dai, F. 2011. Suggested methods for determining the dynamic strength parameters and Mode-I Fracture Toughness of Rock Materials. The ISRM Suggested Methods for Rock Characterization, Test. Monit. 35-44.10.1007/978-3-319-07713-0_3 ↗
56. Yuan, F., Cheng, L., Shao, X., Dong, Z., Zhang, L., Wu, G., He, X. Full-field Measurement and Fracture and Fatigue Characterizations of Asphalt Concrete based on the SCB Test and Stereo-DIC. 235, Eng. Fract. Mech. 107127.10.1016/j.engfracmech.2020.107127 ↗
57. Improving moisture and fracture resistance of warm mix asphalt containing RAP and nanoclay additive10.1016/j.conbuildmat.2020.121900 ↗
58. Tabasi, E., Zarei, M., Alaei, H., Tarafdar., M., Qasim AhmedAlyousuf., F., Khordehbinan, M.W. 2023. Evaluation of long-term fracture behavior of hot mix asphalt modified with Nano reduced graphene oxide (RGO) under freeze–thaw damage and aging conditions. Construct. Build. Mater. 374. 17.10.1016/j.conbuildmat.2023.130875 ↗
59. Pure mode I fracture resistance of Hot Mix Asphalt (HMA) containing Nano-SiO2 under freeze-thaw damage (FTD)10.1016/j.conbuildmat.2022.128757 ↗
60. Effect of Hospital Waste Pyrolysis Hydro carbon (HWPHC) on fracture behavior of Warm Mix Asphalt (WMA) under freeze-thaw damage (FTD)10.1016/j.conbuildmat.2022.129473 ↗
61. Effect of Nano-Reduced Graphene Oxide (NRGO) on Long-Term Fracture Behavior of Warm Mix Asphalt (WMA)10.1016/j.conbuildmat.2023.131934 ↗
62. Low and intermediate temperatures fracture behavior of amorphous poly alpha olefin (APAO)-modified hot mix asphalt subjected to constant and variable temperatures10.1016/j.conbuildmat.2022.129840 ↗
63. Fracture behavior of concrete exposed to the freeze-thaw environment10.1061/(ASCE)MT.1943-5533.0001901 ↗
64. Evaluation of fracture behavior of high-strength hydraulic concrete damaged by freeze-thaw cycle test10.1016/j.conbuildmat.2022.126346 ↗
65. Fracture properties of concrete under freeze-thaw cycles and sulfate attack10.1016/j.conbuildmat.2022.128856 ↗
66. A new empirical formula for prediction of fracture energy of concrete based on the artificial neural network10.1016/j.engfracmech.2017.11.010 ↗
67. Determination of fracture energy from size effect and brittleness number
68. Fuzzy logic approach for estimating durability of concrete10.1680/coma.2009.162.2.81 ↗
69. Probabilistic and experimental investigating the effect of pozzolan and Lumachelle fine aggregates on roller compacted concrete properties10.1016/j.conbuildmat.2017.06.107 ↗
70. Using Response Surface Methodology and providing a modified model using whale algorithm for estimating the compressive strength of columns confined with FRP sheets10.1016/j.conbuildmat.2018.06.081 ↗
71. Combining Kriging meta models with U-function and K-Means clustering for prediction of fracture energy of concrete
72. Fuzzy-metaheuristic ensembles for predicting the compressive strength of brick aggregate concrete10.1016/j.resconrec.2021.105443 ↗
73. Modeling the mechanical properties of recycled aggregate concrete using hybrid machine learning algorithms Resour
74. Artificial neural network model to predict the compressive strength of eco-friendly geopolymer concrete incorporating silica fume and natural zeolite10.1016/j.jclepro.2020.123697 ↗
75. Artificial neural network based modelling approach for strength prediction of concrete incorporating agricultural and construction wastes10.1016/j.conbuildmat.2018.09.097 ↗
76. Comprehensive experimental and numerical modeling of strength parameters of eco-friendly steel fiber reinforced SCC containing coarse copper slag aggregates10.1016/j.conbuildmat.2023.130304 ↗
77. An adaptive divergence-based method for structural reliability analysis via multiple Kriging models10.1016/j.apm.2018.06.015 ↗
78. EFNARC, May 2005. European Guidelines for Self-Compacting Concrete: Specification, Production and Use. Self-compacting concrete European project group.
79. EFNARC, February 2002. Best Practices Guidelines for Self-Consolidating Concrete, Prepared by Ready Mixed Concrete Association of Ontario.
80. Use of copper slag microparticles in self-consolidating concrete
81. Effect of copper slag on the resistance characteristics of SCC exposed to the acidic environment10.1007/s42107-019-00218-x ↗
82. ASTM C114 · 2018
83. ASTM C204 · 2016
84. ASTM C191 · 2019
85. ASTM. C151 · 2009
86. ASTM. C109 · 2020
87. Mixed-mode stress intensity factor solutions of a warped surface flaw by three-dimensional finite element analysis10.1016/0013-7944(87)90214-1 ↗
88. Mixed-mode fracture criteria for the materials with different yield strengths in tension and compression10.1016/0013-7944(92)90282-J ↗
89. Fatigue crack propagation from a crack inclined to the cyclic tensile axis10.1016/0013-7944(74)90007-1 ↗
90. Fracture and fatigue analysis for a cracked carabiner using 3D finite element simulations10.1007/s11223-015-9726-z ↗
91. Influence of natural fibers (kenaf and goat wool) on mixed mode I/II fracture strength of asphalt mixtures10.1016/j.conbuildmat.2019.117850 ↗
92. Schmidt. R. A. 1980. A microcrack model and its significance to hydraulic fracturing and fracture toughness testing,“ in The 21st US Symposium on Rock Mechanics (USRMS), American Rock Mechanics Association.
93. Study of characteristic specification on mixed mode fracture toughness of asphalt mixtures10.1016/j.conbuildmat.2013.12.097 ↗
94. Loading rate effect on fracture behavior of fiber reinforced high strength concrete using a semi-circular bending test10.1016/j.conbuildmat.2019.117681 ↗
95. Using random heterogeneous DEM model to simulate the SCB fracture behavior of asphalt concrete10.1016/j.conbuildmat.2019.117580 ↗
96. Mixed mode fracture resistance of asphalt concrete mixtures10.1016/j.engfracmech.2012.06.015 ↗
97. Evaluating the flexural behavior of green copper slag-contained steel fiber reinforced SCC beams with/without initial notches10.1016/j.conbuildmat.2023.132316 ↗
98. Evaluation of fracture resistance of warm mix asphalt containing jute fibers10.1016/j.conbuildmat.2016.04.128 ↗
99. The influences of matrix and steel fibre tensile strengths on the fracture energy of high-strength concrete10.1016/j.conbuildmat.2010.11.084 ↗
100. Effect of electric arc furnace steel slag on the mechanical and fracture properties of roller-compacted concrete10.1016/j.conbuildmat.2019.03.223 ↗