Investigation of the CFRP-concrete interfacial performance under adhesive curing using the PZT-based wave propagation technique
Source abstract
Abstract
Structural adhesives were widely employed to apply fiber reinforce polymer (FRP) to concrete for structural strengthening purposes. However, the influences of adhesive curing duration on the development of CFRP-concrete interfacial performance remained unknown. This study aims to investigate the bond behavior of CFRP-concrete interfaces with various adhesive curing periods using a piezoelectric (PZT)-based wave propagation (WP) technique. The CFRP-concrete composite specimens were cured for up to 10 days and then subjected to single shear tests. The results demonstrates that the interfacial mechanical properties developed quickly in the initial three days of curing and subsequently stabilized. The failure mode shifted from adhesive failure to cohesive failure following appropriate curing for 3 days. A generalized method provided in the existing literature was employed to obtain the bond-slip relationship with different curing periods. Furthermore, the PZT-based WP technique was utilized to monitor the interfacial bond development during adhesive curing and interfacial mechanical performance under single shear tests. It can be observed that the WP technique effectively tracked the interfacial performance during adhesive curing and single shear tests. Additionally, semi-analytical relationships were established between the WP monitoring results and the interfacial performance. These findings highlight the potential of the WP technique in predicting the interfacial performance of CFRP strengthened concrete structures.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Concrete Corrosion and Durability · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (64)
Show source-provided references
1. Fatigue behavior of notched steel beams strengthened by a prestressed CFRP plate subjected to wetting/drying cycles10.1016/j.compositesb.2021.109491 ↗
2. Fatigue behaviour of notched steel beams strengthened by a self-prestressing SMA/CFRP composite10.1016/j.engstruct.2022.115077 ↗
3. EMI-based interfacial damage evolution of CFRP plates-strengthened RC beams under low-cycle fatigue loading and wetting/drying cycles10.1016/j.compstruct.2022.116653 ↗
4. RC beams strengthened by prestressed CFRP plate subjected to sustained loading and continuous wetting condition: time-dependent prestress loss10.1016/j.conbuildmat.2020.122187 ↗
5. RC beams strengthened by prestressed CFRP plate subjected to sustained loading and continuous wetting condition: flexural behaviour10.1016/j.conbuildmat.2021.125290 ↗
6. Stress analysis of steel beams reinforced with a bonded CFRP plate10.1016/j.compstruct.2003.10.017 ↗
7. Insights on the adhesive properties and debonding mechanism of CFRP/concrete interface under sulfate environment: from experiments to molecular dynamics10.1016/j.conbuildmat.2020.121247 ↗
8. Durability of CFRP-wrapped concrete in cold regions: a laboratory evaluation of montmorillonite nanoclay-modified siloxane epoxy adhesive10.1016/j.conbuildmat.2021.123253 ↗
9. Effects of resin pre-coating treatment and fibre reinforcement on adhesive bonding between CFRP sheet and concrete10.1016/j.compstruct.2022.115610 ↗
10. Bond–slip models for FRP sheets/plates bonded to concrete10.1016/j.engstruct.2005.01.014 ↗
11. Width effect in FRP–concrete debonding mechanism: a new formula10.1061/(ASCE)CC.1943-5614.0001001 ↗
12. Full-range behavior of FRP-to-concrete bonded joints10.1016/j.engstruct.2003.11.006 ↗
13. FRP-strengthened RC beams. I: review of debonding strength models10.1016/S0141-0296(01)00105-5 ↗
14. FRP-strengthened RC beams. II: assessment of debonding strength models10.1016/S0141-0296(01)00106-7 ↗
15. Effects of water immersion on the bond behavior between CFRP plates and concrete substrate10.1016/j.conbuildmat.2015.10.129 ↗
16. Durability performances of carbon fiber–reinforced polymer and concrete-bonded systems under moisture conditions10.1061/(ASCE)CC.1943-5614.0000674 ↗
17. Experimental bond behaviour of a CFRP strengthening system for concrete elements at elevated temperatures10.1016/j.conbuildmat.2018.10.184 ↗
18. Influence of elevated temperatures on the bond behaviour between concrete and NSM-CFRP strips10.1016/j.cemconcomp.2020.103603 ↗
19. Combined effects of wetting–drying cycles and sustained load on the behaviour of FRP-strengthened RC beams10.1016/j.engstruct.2020.110570 ↗
20. FRP-concrete bond performance under accelerated hygrothermal conditions10.1016/j.conbuildmat.2020.121403 ↗
21. A review on the advances of the study on FRP-Concrete bond under hygrothermal exposure10.1016/j.conbuildmat.2022.129818 ↗
22. Effect of hygrothermal acid rain environment on the shear bonding performance of CFRP-concrete interface10.1016/j.conbuildmat.2022.130002 ↗
23. Moy S. CFRP reinforcement of steel beams adhesive cure under cyclic load. Proceedings of the 1st Asia-Pacific Conference on FRP in Structures (APFIS’07)2007. 1019–1024.
24. Moy S.S.J. Early age curing under cyclic loading-a further investigation into stiffness development in carbon fibre reinforced steel beams. LINK project, Carbon Fibre Composites for Structural Upgrade and Life Extension, Validation and Design Guidance Project Report. 2001.
25. Curing effects on steel/CFRP double strap joints under combined mechanical load, temperature and humidity10.1016/j.conbuildmat.2012.11.035 ↗
26. Effects of water on the curing and properties of epoxy adhesive used for bonding FRP composite sheet to concrete10.1002/app.20195 ↗
27. Effect of casting and curing temperature on the interfacial bond strength of epoxy bonded concretes10.1016/j.conbuildmat.2021.124328 ↗
28. Piezoelectric-based monitoring of the curing of structural adhesives: a novel experimental study10.1088/1361-665X/aaeea4 ↗
29. Development of analytical and numerical models for predicting the mechanical properties of structural adhesives under curing using the PZT-based wave propagation technique10.1016/j.ymssp.2019.03.030 ↗
30. GB 50728-2011: Technical code for safety appraisal of engineering structural strengthening materials, Ministry of Housing and Urban Rural Development of the People's Republic of China. 2011.
31. Monitoring and characterizing the debonding in CFRP retrofitted RC beams using acoustic emission technology
32. Using acoustic emission to monitor failure modes in CFRP-strengthened concrete structures10.1061/(ASCE)AS.1943-5525.0001106 ↗
33. Inspection of concrete structures externally reinforced with FRP composites using active infrared thermography: A review10.1016/j.conbuildmat.2021.125265 ↗
34. Debonding detection of defected CFRP-concrete interface using active microwave thermography10.1016/j.compstruct.2023.116753 ↗
35. Measurement and visualization of strains and cracks in CFRP post-tensioned fiber reinforced concrete beams using distributed fiber optic sensors10.1016/j.autcon.2021.103604 ↗
36. Damage, nondestructive evaluation and rehabilitation of FRP composite-RC structure: a review10.1016/j.conbuildmat.2020.121551 ↗
37. Computed tomography based modelling of the behaviour of closed cell metallic foams using a shell approximation10.1016/j.matdes.2020.108866 ↗
38. Diagnosis of NSM FRP reinforcement in concrete by using mixed-effects models and EMI approaches10.1016/j.compstruct.2021.114322 ↗
39. Experimental and numerical studies of debonding monitoring of FRP shear-strengthened beams using EMI technique10.1061/(ASCE)AS.1943-5525.0000876 ↗
40. A novel approach for non-destructive EMI-based corrosion monitoring of concrete-embedded reinforcements using multi-orientation piezoelectric sensors10.1016/j.conbuildmat.2020.121689 ↗
41. Debonding damage detection of the CFRP-concrete interface based on piezoelectric ceramics by the electromechanical impedance method10.1016/j.conbuildmat.2021.124431 ↗
42. Debonding detection of FRP strengthened concrete beams by using impedance measurements and an ensemble PSO adaptive spectral model10.1016/j.compstruct.2015.02.011 ↗
43. Fracture characteristics and stress transfer length of CFRP-concrete bond under field conditioning10.1016/j.ijadhadh.2022.103231 ↗
44. Electrochemical impedance based interfacial monitoring for concrete beams strengthened with CFRP subjected to wetting–drying cycling and sustained loading10.1016/j.conbuildmat.2022.130238 ↗
45. Bond degradation and EMI-based monitoring of CFRP to concrete interfaces exposed to wet-dry cycling10.1016/j.engstruct.2022.114225 ↗
46. Generalized evaluation of the effects of wet/dry cycling on CFRP-concrete bond subjected to low-cycle fatigue loading10.1016/j.engstruct.2022.114762 ↗
47. Debonding detection in CFRP-retrofitted reinforced concrete structures using nonlinear Rayleigh wave10.1016/j.ymssp.2018.08.027 ↗
48. Debonding damage detection of the CFRP-concrete interface based on piezoelectric ceramics by the wave-based method10.1016/j.conbuildmat.2019.03.042 ↗
49. Monitoring and evaluation of the repair quality of concrete cracks using piezoelectric smart aggregates10.1016/j.conbuildmat.2021.125775 ↗
50. Localization and size quantification of surface crack of concrete based on Rayleigh wave attenuation model10.1016/j.conbuildmat.2021.122437 ↗
51. Noninvasive monitoring of epoxy curing10.1109/LSENS.2017.2753581 ↗
52. Bonding piezoelectric wafers for application in structural health monitoring–adhesive selection10.1080/09349847.2014.934575 ↗
53. Strength gain monitoring and construction quality evaluation on non-dispersible underwater concrete using PZT sensors10.1016/j.conbuildmat.2022.126400 ↗
54. Embedded dual PZT-based monitoring for curing of concrete10.1016/j.conbuildmat.2021.125316 ↗
55. GB/T 3354: Test method for tensile properties of orientation fiber reinforced polymer matrix composite materials, Standardization administration of the People’s Republic of China. 2014.
56. Experimental study on the bond behavior of CFRP-steel interfaces under quasi-static cyclic loading10.1016/j.tws.2019.03.060 ↗
57. Experimental study on the bond behavior of the CFRP-steel interface under rapid loading10.1016/j.tws.2020.107233 ↗
58. Bond-slip model of the CFRP-steel interface with the CFRP delamination failure10.1016/j.compstruct.2020.113015 ↗
59. GB/T 2567: Test methods for properties of resin casting body, Standardization administration of the People’s Republic of China. 2021.
60. ASTM C39/C39M-21: Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens, ASTM International. 2021.
61. Non-destructive concrete strength evaluation using smart piezoelectric transducer—A comparative study10.1088/0964-1726/25/8/085021 ↗
62. Development of the nonlinear bond stress–slip model of fiber reinforced plastics sheet–concrete interfaces with a simple method10.1061/(ASCE)1090-0268(2005)9:1(52) ↗
63. Zhu M., Ueda T., Zhu J.-H. Generalized Method of Determining the Local Bond Slip Relationship of the Reinforcement Externally Bonded to Concrete. Springer. In: Ilki, A., Ispir, M., Inci, P. (eds) 10th International Conference on FRP Composites in Civil Engineering. CICE 2021. Lecture Notes in Civil Engineering, vol 198. Springer, Cham.,p. 224–31, 2022.10.1007/978-3-030-88166-5_18 ↗
64. Generalized evaluation of bond behavior of the externally bonded FRP reinforcement to concrete10.1061/(ASCE)CC.1943-5614.0001081 ↗