journal article·2024-04Open access

Experimental investigation on damage of concrete beam embedded with sensor using acoustic emission and digital image correlation

Chuankun Liu, Ya Wei

Abstract

With the construction and development of intelligent roads, an increasing number of sensors are being embedded into the road structures. Portland cement concrete (PCC) pavement is one of the main forms of road pavement , but the mechanical behaviors of the PCC pavement with sensor embedding are less studied. In this study, the damage mechanism of PCC pavement is investigated by using the three-point beam bending test , considering the sensor embedding and the coating of the sensor surface. The effect of sensor embedding on the flexural mechanical properties and the damage failure modes of concrete beams are evaluated by using the acoustic emission (AE) technique and the digital image correlation (DIC) technique. Moreover, the concept of degree of coupling ( DC ) is introduced to reveal the collaborative bearing mechanism between sensor and concrete, and is characterized by an evaluation model considering ultimate bearing capacity, critical instability point, collaborative bearing capacity, AE ring counts, and AE energy. The findings can provide valuable insights in the packaging design of sensor to guarantee the coupling between the sensor and the surrounding concrete for accurately monitoring the long-term performance of road infrastructure.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Ultrasonics and Acoustic Wave Propagation · Smart Materials for Construction · Structural Health Monitoring Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. Structural health monitoring of civil engineering structures by using the internet of things: a review
2. Assessment of cracks detection in pavement by a distributed fber optic sensing technology10.1007/s13349-017-0236-5 ↗
3. Restrained shrinkage behavior of internally-cured UHPC using calcined bauxite aggregate in the ring test and UHPC-concrete composite slab10.1016/j.cemconcomp.2022.104805 ↗
4. Continuous dynamic monitoring of a large-span arch bridge with wireless nodes based on MEMS accelerometers10.1002/stc.2963 ↗
5. Effect of bonded length on the load response and failure mode of pull-out tests of GFRP bars embedded in concrete10.1016/j.conbuildmat.2022.128425 ↗
6. Piezoresistive performance of hydrophobic cement-based sensors under moisture and chloride-rich environments10.1016/j.cemconcomp.2021.104379 ↗
7. Monitoring depth and width of cracks in underwater concrete structures using embedded smart aggregates10.1016/j.measurement.2022.112078 ↗
8. Evaluation of low-cost MEMS accelerometers for SHM: Frequency and damping identification of civil structures10.1590/1679-78255308 ↗
9. Structural health monitoring of asphalt pavements using smart sensor networks: a comprehensive review
10. Efficient health monitoring of buildings using failure modes and effects analysis case study: air handling unit system
11. An efficient real-time vehicle monitoring method10.1109/TITS.2022.3150224 ↗
12. Experimental study on interface performance between implantable cement-based sensor and matrix concrete10.1016/j.conbuildmat.2022.128316 ↗
13. High-precision resistance strain sensors of multilayer composite structure via direct ink writing: optimized layer flatness and interfacial strength10.1016/j.compscitech.2020.108530 ↗
14. Theoretical and experimental studied on strain transfer based on distributed optical fiber
15. Interfacial changes of optical fibers in the cementitious environment10.1023/A:1026729227183 ↗
16. Escober, P., Gusmeroli, V., Martinelli, M., Lanciani, I., and Morabito, P. (1992). First European Conference on Smart Structures and Materials. Glasglow, edited by Culshaw, B. et al., 215.
17. Highway infrastructure health monitoring using micro-electromechanical sensors and systems (MEMS)
18. Analysis on long-term coupling effects between fiber Bragg grating and damaged matrix
19. Research on the cooperative performance of built-in strain sensor and asphalt pavement structure
20. Study on synergistic deformation and damage behavior of asphalt mixture with built in sensors
21. Li, D. (2021). Cement-based piezoresistive sensors and fatigue properties of embedded components. Tsinghua University.
22. Numerical analysis on design and application of cement-based sensor for structural health monitoring10.1177/1045389X17692051 ↗
23. Strain monitoring in FRP laminates and concrete beams using FBG sensors10.1016/S0263-8223(00)00094-5 ↗
24. Studies on the validity of strain sensors for pavement monitoring: a case study for a fiber Bragg grating sensor and resistive sensor10.1016/j.conbuildmat.2021.126085 ↗
25. Damage detection of concrete piles subject to typical damage types based on stress wave measurement using embedded smart aggregates transducers10.1016/j.measurement.2016.01.042 ↗
26. Smart aggregates for monitoring stress in structural lightweight concrete10.1016/j.measurement.2018.03.041 ↗
27. A distributed pavement monitoring system based on Internet of Things
28. K. Xu, Z. Qian, T. Zhang, Q. LiuSensor practical technology, Beijing Natl. Def. Ind. Press , 20162016.
29. Acoustic emission characteristics of coal failure using automatic speech recognition methodology analysis10.1016/j.ijrmms.2020.104472 ↗
30. Influence of grouted sleeve and concrete strength of fabricated shear wall on acoustic emission detection method for sleeve compactness
31. Review of digital image correlation application to large-scale composite structure testing10.1016/j.compstruct.2021.114143 ↗
32. Influence of backing layer on the non-metallic encapsulated acoustic emission sensor for concrete monitoring
33. Experimental study on damage evolution characteristics of segment structure of shield tunnel with cracks based on acoustic emission information10.1016/j.engfailanal.2020.104899 ↗
34. Monitoring early-age acoustic emission of cement paste and fly ash paste10.1016/j.cemconres.2019.105964 ↗
35. Crack classification in concrete based on acoustic emission10.1016/j.conbuildmat.2010.05.004 ↗
36. Space–time evolution rules of acoustic emission location of unloaded coal sample at different loading rates10.1016/j.ijmst.2012.12.001 ↗
37. JCMS-III, B5706, Monitoring method for active cracks in concrete by acoustic emission, Federation of Construction Materials Industries, Japan, 2003.
38. Revealing the effect of silica fume on the flexural behavior of ultra-high-performance fiber-reinforced concrete by acoustic emission technique10.1016/j.cemconcomp.2022.104563 ↗
39. Elastic Modulus of 304 Stainless Steel Coating by Cold Gas Dynamic Spraying10.1016/S1006-706X(12)60077-6 ↗
40. Effect of CTBN and Nano-SiO2 modified epoxy resin powder on the mechanical properties of cement-based composites
41. Acoustic characterization of damage and healing of microencapsulation-based self-healing cement matrices10.1016/j.cemconcomp.2017.08.013 ↗
42. A simplex method for function minimization10.1093/comjnl/7.4.308 ↗
43. Study on AE activity characteristics under uniaxial compression loading
44. Experimental research of the AE responses and fracture evolution characteristics for sand-paraffin similar material10.1016/j.conbuildmat.2016.12.028 ↗
45. The sustainable transport planning index: A tool for the sustainable implementation of public transportation
46. Effective methodology of sustainability assessment of concrete mixtures