journal article·2015-09

Effect of curing on the compressive strength development in structural grades of geocement concrete

Kamal Neupane, Rasiah Sriravindrarajah, Daksh Baweja, Des Chalmers

Publisher page

Abstract

Abstract Rate of strength development of geocement concrete under ambient and accelerated curing conditions is important to the construction industry. This paper reports the results of an experimental investigation into the development of compressive strength with age for Grades 40, 50, 65 and 80 geocement concretes subjected to ambient (20 °C) and accelerated (70 °C for 4 and 24 h) curing conditions. Two types of powder-activated geocement, having fly ash: slag (ground granulated blast furnace) weight ratio, of 7:3 and 4:6, were used to produce four grades of geopolymer concrete mixtures. For comparison, similar grades of ordinary Portland cement concrete were also investigated for their strength development under similar curing conditions. At ambient curing condition, similar to Portland cement concretes, geocement concretes showed gradual strength development with age at a decreasing rate. However, geocement concretes showed 15–20% increase in strength from 28 to 90 days, compared to 3–8% for the Portland cement concretes. Grade 65 geocement concrete recorded 45% and 79% of its 28-day ambient cured strength after 4 and 24 h of heat-curing at 70 °C. Empirical relationships between heat-cured and 28-day ambient-cured strengths for geocement concretes are developed and could be used by precast industry for quality assurance purpose.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Recycled Aggregate Concrete Performance

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. Geopolymers – inorganic polymerie new materials10.1007/BF01912193 ↗
2. Geopolymer technology: the current state of the art10.1007/s10853-006-0637-z ↗
3. Investigation of geopolymer binders with respect to their application for building materials
4. Alkali-activated fly ash/slag cements: strength behaviour and hydration products10.1016/S0008-8846(00)00298-2 ↗
5. Effect of type, form, and dosage of activators on strength of alkali-activated natural pozzolans10.1016/j.cemconcomp.2010.10.021 ↗
6. Alkali-activated binders: a review. Part 2. About materials and binders manufacture10.1016/j.conbuildmat.2007.03.019 ↗
7. Effect of curing temperature and silicate concentration on fly-ash-based geopolymerization10.1021/ie051251p ↗
8. Fly ash-based geopolymer concrete10.1080/13287982.2005.11464946 ↗
9. Effect of curing temperature on the development of hard structure of metakaolin-based geopolymer10.1016/j.conbuildmat.2009.12.023 ↗
10. Parametric studies on compressive strength of geopolymer concrete10.1016/j.proeng.2013.01.030 ↗
11. P. Nath, P.K. Sarker, Geopolymer concrete for ambient curing condition, in: Proc Australasian Structural Engineering Conference, Engineers Australia, Perth, Australia, 2012.
12. Effect of replacement of slag on the mechanical properties of fly ash based geopolymer concrete
13. The coexistence of geopolymeric gel and calcium silicate hydrate at the early stage of alkaline activation10.1016/j.cemconres.2004.10.042 ↗
14. Standard Australia, AS3972: General purpose and blended cements, Standards Australia International Ltd Sydney, Australia, 2010.
15. Standards Australia, AS 1478.1: Chemical admixtures for concrete, mortar and grout; Part 1 – Admixtures for concrete, Standards Australia International Ltd, Sydney, Australia, 2000.
16. D.C. Teychenné, R.E. Franklin, H.C. Erntroy, B.K. Marsh, Design of normal concrete mixes. Building research establishment, Construction Research Communications Ltd., London, England, 1997.
17. Standard Australia, AS 1012.2: Methods of testing concrete; Method 2: Preparation of the concrete mixes in the laboratory, Sydney, Standards Australia, 1994.
18. Standard Australia, AS 1012.3.1: Methods of testing concrete; Method 3.1: Determination of the properties related to the consistency of concrete – Slump test, Sydney, Standards Australia, 1998.
19. Standard Australia, AS 1012.5: Methods of testing concrete; Method 5: Determination of mass per unit volume of freshly mixed concrete, Sydney, Standards Australia, 1999.
20. Standard Australia, AS 1012.18: Methods of testing concrete; Method 18: Determination of setting time of fresh concrete, mortar and grout by penetration resistance, Sydney, Standards Australia, 1996.
21. A quick method to predict 28-day strength of concrete
22. Alkali-activated slag mortars: mechanical strength behaviour10.1016/S0008-8846(99)00154-4 ↗
23. Controlled tropical curing method for accelerated concrete strengths’10.1016/0262-5075(89)90033-X ↗
24. Efficiency of accelerated curing in concrete10.1016/S0008-8846(01)00564-6 ↗