journal article·2015-03Open access

Passive film formation and corrosion initiation in lightweight concrete structures as compared to self compacting and ordinary concrete structures at elevated temperature in chloride rich marine environment

Muhammad Wasim, Raja Rizwan Hussain

Abstract

Abstract Corrosion of reinforced concrete is one of the most critical durability concerns in the construction field. Researchers and engineers are examining and determining the performance of various types of reinforced concrete in saline and under various environmental conditions. This research is also a contribution to such corrosion studies and it aims at investigating passive film formation and the corresponding corrosion and its extent in the ordinary (OC), self-compacting (SSC) and lightweight concrete (LWC) structures at normal and elevated temperature. For this purpose total of 18 specimen including 6 specimens of each OC, SCC and LWC were prepared with 5% and 3% total chloride, respectively and kept in environmental chambers at 30, 40 and 50 °C. After six months of corrosion observations i.e., corrosion potentials, currents and gravimetric mass loss, interesting and novel results were obtained on comparing the corrosion observations of all the above types of concrete.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete Corrosion and Durability · Concrete and Cement Materials Research · Concrete Properties and Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. Structural lightweight aggregate concrete – the future
2. Status of structural lightweight concrete in Australia as the new millennium dawns
3. BP invests heavily in lightweight concrete for North Sea
4. Characteristics and properties of lightweight concrete manufactured with cenospheres10.1016/S0008-8846(00)00357-4 ↗
5. Efficiency of lightweight aggregates for internal curing of high strength concrete to eliminate autogenous shrinkage10.1007/BF02482108 ↗
6. Performance of lightweight aggregate concrete structures in service
7. Experimental investigation on the use of fly ash for lightweight precast structural elements10.1007/BF02485971 ↗
8. A new generation of lightweight concrete
9. The ingredients for high performance in structural lightweight aggregate concrete
10. Production and properties of Lytag aggregate fully utilised for the North Sea
11. Some characteristics of high strength fiber reinforced lightweight aggregate concrete10.1016/S0958-9465(02)00016-1 ↗
12. High strength lightweight aggregate concrete – current status and future needs
13. Chloride induced reinforcement corrosion in lightweight aggregate high-strength fly ash concrete10.1016/j.conbuildmat.2004.07.003 ↗
14. Repair vulnerability of corrosion patch repairs at the steel intersection areas of reinforced concrete slabs influenced by harsh weather10.1021/ie402901y ↗
15. Wasim M, Hussain Raja Rizwan, Ali Baloch M. Investigation of long term coupled effect of high temperature and constant high humidity on corrosion rehabilitated patches of reinforced concrete structures. Int J Civil Eng 2015;13(1).
16. Comparative study on induced macrocell corrosion phenomenon in repaired ordinary reinforced and self-compacting concrete structures10.1179/1743278213Y.0000000090 ↗
17. ASTM C192/C192M-07 · 2007
18. Uomoto · 2000
19. GECOR-8. Available from: http://www.ndtjames.com/Gecor-8-p/c-cs-8.htm, May 4, 2012.
20. ASTM C 876-09 · 2009
21. Corrosion rate evolution in concrete structures exposed to the atmosphere10.1016/S0958-9465(01)00026-9 ↗
22. Time dependent electrochemical effect of saturated area in capillary and gel pores of concrete on the corrosion rate of embedded steel reinforcement10.1016/S1452-3981(23)13422-5 ↗
23. ASTM G1-90 · 2009