journal article·2014-04

The effects of chemical attacks on physical and mechanical properties of concrete produced under cold weather conditions

Mustafa Çullu, Metin Arslan

Publisher page

Abstract

Abstract This study investigates the effects of corrosive conditions on the physical and mechanical properties of concrete produced in cold weather. 30% calcium nitrate and 5% hydroxyethylaminemixture (HEA) were used as additives in antifreeze. Within 15 min of placing the prepared concrete samples in molds, the samples were put in a deep freezer. They were exposed to frost at 0 °C, −5 °C, −10 °C, −15 °C and −20 °C degrees in the deep freezer over two days. The samples were taken out of the freezer and removed from the forms one day later. They were cured in water at room temperature until the 28th day. The samples were then exposed to sulfuric acid of 5% concentration (H 2 SO 4 ), magnesium sulfate of 7500 mg/L concentration (MgSO 4 ), sodium sulfate of 5% concentration (NaCl), and corrosive cure and water-curing until the 120th day. At the end of the curing period, the permeable pore space volume, water absorption ratio, unit volume weight, capillarity ratio, impermeability, compressive strength, static modulus of elasticity, Poisson’s ratio and tensile strength values of the concrete samples were determined. The results showed that the physical and mechanical properties of the concrete were negatively affected by the corrosive conditions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Field performance of concrete exposed to sulphate and low pH conditions from natural and industrial sources10.1016/j.cemconcomp.2011.07.009 ↗
2. Evaluation of the sulfate resistance of cements in a controlled environment10.1016/0008-8846(81)90030-2 ↗
3. Internal and external sources of sulfate ions in Portland cement mortar: two types of chemical attack10.1016/0008-8846(88)90092-0 ↗
4. Mechanics of sulfate attack on Portland cement concrete another look10.1016/0008-8846(83)90040-6 ↗
5. Stark · 1980
6. Sulfate resistance of concrete containing mineral admixtures
7. Influence of silica fume replacement of cement on physical properties and resistance to sulfate attack, freezing and thawing, and alkalisilica reactivity
8. Seawater effect on durability of ternary cements. Synergy of chloride and sulphate ions10.1016/j.compositesb.2012.09.089 ↗
9. An effective diffusivity for sulfate transport into concrete10.1016/0008-8846(95)00108-O ↗
10. Durability of metakaolin concrete to sulfate attack10.1016/j.cemconres.2006.03.026 ↗
11. Sulfate attack on concrete – a critical review
12. 1999 · 73
13. Ettringite and thaumasite formation in laboratory concretes prepared using sulfate-resisting cements10.1016/S0958-9465(01)00088-9 ↗
14. Corrosion of hardened cement paste by acetic and nitric acids Part III: Influence of water/cement ratio10.1016/S0008-8846(96)85035-6 ↗
15. Influence of chloride ions and pH level on the durability of high performance cement pastes (Part II)10.1016/S0008-8846(96)85012-5 ↗
16. Determination by the taguchi method of optimum conditions of mechanical properties of high strength concrete with admixtures of silica fume and blast furnace slag10.1080/1028660031000081527 ↗
17. Examinatıon of durablity of high performance concrete (hpc) that has been subjected to MgSO4 and NaCI corrosıon against freezing and thawing
18. The effects of antifreeze use on physical and mechanical properties of concrete produced in cold weather10.1016/j.compositesb.2013.02.012 ↗
19. EN 706 12620+A1 Aggregates for concrete. Ankara: Turkish Standards Institute; 2009. p. 1–50.
20. ASTM C 494 Standard specification for chemical admixtures for concrete. Concrete and Mineral Aggregates. Philadelphia, USA: Annual Book of ASTM Standards; 2004. p. 1–10.
21. TS 11746 Chemical admixtures for concrete antifreezing agents for concrete. Ankara: Turkish Standards Institute; 1995. p. 1–14.
22. EN 934-2 Admixtures for concrete, mortar and grout – Part 2: Concrete admixtures – Definitions, requirements, conformity, marking and labelling. Ankara: Turkish Standards Institute; 2011. p. 1–24.
23. TSE 802 Design concrete mixes. Ankara: Turkish Standards Institute; 2009. p. 1–26.
24. The effect of antifreeze admixtures on compressive strength of concretes subjected to frost action
25. ASTM C642 Standard test method for density, absorption, and voids in hardened concrete. Philadelphia, USA: Annual Book of ASTM Standards; 2004. p. 1–3.
26. EN 12390-7 Testing hardened concrete – Part 7: Density of hardened concrete. Ankara: Turkish Standards Institute; 2010. p. 1–11.
27. ASTM C1585 Standard test method for measurement of rate of absorption of water by hydraulic-cement concretes. Philadelphia, USA; Annual Book of ASTM Standards: 2004. p. 1–6.
28. EN 12390-8 Testing hardened concrete – Part 8: depth of penetration of water under pressure. Ankara: Turkish Standards Institute; 2010. p. 1–7.
29. EN 12390-3 Testing hardened concrete – Part 3: Compressive strength of test specimens. Ankara: Turkish Standards Institute; 2010. p. 1–19.
30. ASTM C469 Standard test method for static modulus of elasticity and poisson’s ratio of concrete in compression. Philadelphia, USA: Annual Book of ASTM Standards; 2002. p. 1–5.
31. ASTM C496 Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens. Philadelphia, USA: Annual Book of ASTM Standards; 2004. p. 1–5.