Numerical modelling of the behaviour of consolidated porous media exposed to frost action
Source abstract
Abstract
Abstract This paper summarizes the physical basis of a hydro-mechanical model whose components are the mass conservation equations of the solid matrix, water and ice. The constitutive laws of these three phases, used with Biot’s model and Darcy’s law for porous media, allow the strains of the medium and the various phase pressures to be coupled. The mechanical equilibrium equation leads to the final system of equations, the resolution of which gives the space and time variations of the stresses and strains. The interest of the physical formulation is to provide an expression for the hydrostatic pressure related to the presence of the phases in the porous volume, in the form of a liquid pressure and an additional term which can be deduced from the pore size distribution. The numerical code was implemented to test the capacity of this model to describe the strains observed in tiles subjected to freeze/thaw cycles. At present the model does not correctly reproduce the experimental strains. The importance of the boundary conditions is, however, highlighted.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Climate change and permafrost · Soil and Unsaturated Flow · Landslides and related hazards
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Powers TC. The air requirement of frost-resistant concrete. In: Proc. Highway Res. Board; 1949.
2. Powers TC, Helmuth RA. Theory of volume changes in hardened Portland cement paste during freezing. In: Proc. Highway Res. Board; 1953.
3. Phase transition of adsorbates: VI, effect of deicing agents on the freezing of cement paste10.1111/j.1151-2916.1975.tb18975.x ↗
4. Frost action in cement in the presence of de-icers10.1016/0008-8846(76)90097-1 ↗
5. Modeling the deterioration of hydrated cement systems exposed to frost action Part 1: description of the mathematical model10.1016/S0008-8846(00)00405-1 ↗
6. Zuber B. Vers une modélisation numérique du comportement des matériaux cimentaires exposés au gel., in LMT. école nationale supérierue de Cachan; 2002.
7. Predicting the volume instability of hydrated cement systems upon freezing using poro-mechanics and local phase equilibria
8. Bejaoui S. Etude de la formation de la glace au sein de la texture poreuse des matériaux a base de liants hydrauliques, in INSA. Toulouse; 2001.
9. A new method for the simultaneous determination of the size and the shape of pores: the thermoporometry10.1016/0040-6031(77)85122-8 ↗
10. Matala S., Effects of carbonation on the pore structure of granulated blast furnace slag concrete, PhD thesis, Rep. 6, Helsinki University of Technology, Faculty of the Civil Engineering and Surveying Concrete Technology, Espoo, Finland; 1995. p. 161.
11. Determination of pore-size distribution from freezing-point depression10.1007/BF02479036 ↗
12. Freezing gels10.1016/0022-3093(93)90467-C ↗
13. Crystallization in pores10.1016/S0008-8846(99)00002-2 ↗
14. The mechanism of frost damage in hardened cement paste10.1016/0008-8846(74)90128-8 ↗
15. General theory of three dimensional consolidation10.1063/1.1712886 ↗
16. Defay R, Prigogine I. Tension superficielle et adsorption. Liège: éditions Desoer; 1951.
17. Computational modelling of isothermal consolidation of fractured porous media10.1016/0266-352X(95)91302-K ↗
18. Simulation of a fully coupled thermo-hydro-mechanical system in freezing and thawing rock10.1016/S0148-9062(99)00026-1 ↗
19. Poromechanics of freezing materials10.1016/j.jmps.2005.04.001 ↗
20. Wardeh, G., Les phénomènes de gel-dégel dans les matériaux à base de terre cuite et les conséquences sur leur durabilité. Expériences et Modélisation. 2005, thèse de doctorat de l’Université Paul Sabatier, Toulouse.
21. Analysis of strains in baked clay based materials during freezing and thawing cycles10.1177/1744259106060245 ↗