Characteristics of selected concrete with tunnel excavation material
Source abstract
Abstract
Abstract Infrastructure tunnels are an important element in transportation. In the process of tunnel driving, a large amount of excavating material accumulates. Strategies to reuse this material have been growing in popularity during recent years as a result of economic and environmental considerations. It is therefore necessary to reassess the material management concept and identify possibilities to recycle the excavated rock material at the same time. The aim of the current paper is to investigate the mechanically relevant parameters of concrete using various tunnel excavation materials as aggregates and different cement types (e.g. composite cements) by experimental testing. Thereby, basic material parameters of freshly mixed as well as hardened concrete and fracture relevant quantities of hardened concrete are determined. Moreover, the properties of plain concrete and fibre reinforced concrete with aggregates of tunnel excavation material are compared with each other.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Tunneling and Rock Mechanics · Geotechnical Engineering and Analysis · Grouting, Rheology, and Soil Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. Ecological properties of building materials10.1007/BF02485919 ↗
2. Concrete and sustainable development
3. K. Voit, K. Bergmeister, I. Janotka, Reducing CO2-emission by using CEM V eco-cements, in: Proceedings of IALCCE 2012, Vienna, Austria, 2012, pp. 1196–1202.
4. K. Voit, Optimierung der Ökobilanz von Beton durch Einsatz von CEM V-Kompositzementen, Werkstoffe und Konstruktionen: Innovative Ansätze (2013) 54–60.
5. Concrete fracture models: testing and practice10.1016/S0013-7944(01)00084-4 ↗
6. D. Lehký, Z. Keršner, D. Novák, Jointless bridge: determination of fracture mechanical parameters values for nonlinear analysis, in: Proceedings of IABMAS 2010, Philadelphia, PA, United States, 2010, pp. 460–463.10.1201/b10430-63 ↗
7. ANN inverse analysis based on stochastic small-sample training set simulation10.1016/j.engappai.2006.05.003 ↗
8. Fracture properties of cement and alkali activated fly ash based concrete with application to segmental tunnel lining10.1016/j.advengsoft.2013.04.009 ↗
9. High performance concrete with Czech metakaolin: experimental analysis of strength, toughness and durability characteristics10.1016/j.conbuildmat.2010.01.017 ↗
10. Determination of material parameters of concrete for non-linear modeling10.4028/www.scientific.net/AMR.651.321 ↗
11. Stochastic fracture-mechanical characteristics of concrete based on experiments and inverse analysis10.1016/j.conbuildmat.2014.09.087 ↗
12. T. Zimmermann, D. Lehký, Fracture parameters of concrete C40/50 and C50/60 determined by experimental testing and numerical simulation via inverse analysis, J. Fract. online first.
13. Stochastic fracture-mechanical parameters for the performance based design of concrete structures10.1002/suco.201300077 ↗
14. B. Ellingwood, Structural reliability and performance-based engineering, in: Proceedings of the Institution of Civil Engineers: Structures and Buildings, vol. 161, 2008, pp. 199–207.10.1680/stbu.2008.161.4.199 ↗
15. H. Rüsch, R. Sell, R. Rackwitz, Statistische Analyse der Betonfestigkeit, Beuth Verlag (1969).
16. Entwicklung eines baupraktischen Näherungsverfahrens zur Beurteilung der Zuverlässigkeit von Massivbrücken auf der Grundlage der Ergebnisse von Bauwerksüberprüfungen10.1002/best.201000080 ↗
17. Bazant · 1998
18. R. Pukl, V. Cervenka, J. Cervenka, D. Novák, Computer simulation of concrete bridges, in: Proceedings of IABMAS 2012, Stresa, Italy, 2012, pp. 3680–3684.10.1201/b12352-551 ↗
19. Assessment of existing structures based on identification10.1061/(ASCE)0733-9445(2010)136:1(86) ↗
20. Performance-based design of concrete structures: durability aspects10.12989/sem.2010.35.4.535 ↗
21. Vorerkundung und Baufortschritt beim Brenner Basistunnel10.1002/best.201380006 ↗
22. K. Bergmeister, Life-cycle design for the world’s longest tunnel project, in: Proceedings of IALCCE 2012, Vienna, Austria, 2012, pp. 51–59.
23. Aicha-mauls on the Brenner base tunnel -status of the works and results10.1002/geot.201000044 ↗
24. Recycling and deposition of excavation material
25. L. Saathof, M. Ketelaars, Re-use of excavated soil from large diameter tunnels in the Netherlands, Balkema (1999).
26. K. Voit, Einsatz und Optimierung von Tunnelausbruchmaterial des Brenner Basistunnels (Ph.D. thesis), University of Natural Resources and Life Sciences Vienna, 2013.
27. EN1926, Natural stone test methods – determination of compressive strength (1999).
28. BBT, Langbericht Geotechnische Laborversuche, Tech. rep., gdtest srl Turin (2006).
29. Grübl · 2001
30. Verein-Deutscher-Zementwerke (Ed.), Zement-Taschenbuch, 51st ed., Forschungsinstitut der Zementindustrie, Düsseldorf (2008).
31. ONR23303, Test methods for concrete – National application of testing standards for concrete and its source materials (2010).
32. EN12390-2, Testing of hardened concrete – Part 2: Making and curing specimens for strength tests (2009).
33. EN12390-1, Testing hardened concrete – Part 1: Shape, dimensions and other requirements for specimens and moulds (2005).
34. EN12390-3, Testing of hardened concrete – Part 3: Compressive strength of test specimens (2009).
35. EN12390-5, Testing of hardened concrete – Part 5: Flexural strength of test specimens (2009).
36. Iken · 2003
37. Beton
38. V. Cervenka, J. Cervenka, R. Pukl, Safety assessment in fracture analysis of concrete structures, in: Proceedings of the 6th International Conference on Fracture Mechanics of Concrete and Concrete Structures, Catania, Italy, vol. 2, 2007, pp. 1043–1049.
39. Reliability-based non-linear analysis according to fib model code 201010.1002/suco.201200022 ↗
40. Material model for finite element modelling of fatigue crack growth in concrete10.1016/j.proeng.2010.03.022 ↗
41. fib, CEB-FIP Model Code 2010, vols. 1 and 2, Thomas Telford Services Ltd, 2012.
42. J. Taferner, M. Keuser, K. Bergmeister, Integrale Konstruktionen aus Beton, in: Beton Kalender, Ernst & Sohn, Berlin, 2009.
43. ON-B3592, Determination of cut-through-tensile splitting strength and specific fracture energy of building materials, combinations of building materials and composites – wedge splitting method (2011).
44. Die Bestimmung der Bruchenergie an Würfelproben
45. The wedge splitting test, a new method of performing stable fracture mechanics tests10.1016/0013-7944(90)90189-N ↗
46. New equipments for fracture tests on concrete
47. EN206-1, Concrete – Part 1: Specification, performance, production and conformity (2005).
48. ON-B4710-1, Concrete – Part 1: Specification, production, use and verification of conformity (rules for the implementation of önorm EN 206-1) (2002).
49. High performance fiber reinforced concrete: progress in knowledge and design codes10.1617/s11527-009-9538-3 ↗
50. A. Meda, P. Perruzza, Z. Rinaldi, R. P., Fiber reinforced concrete segmental lining tunnels: from design to structure, in: fib Symposium 2013, Tel Aviv, 2013.
51. ÖBV, Richtlinie Faserbeton, Österreichische Bautechnik Vereinigung, Vienna, 2008.
52. RVS09.01.43, Innenschalenbeton, Forschungsgesellschaft Strasse – Schiene – Verkehr (2004).
53. W. Kusterle, W. Lindlbauer, G. Hampejs, et al., Brandbeständigkeit von Faser-, Stahl- und Spannbeton, no. 544, Federal Ministry for Transport, Innovation and Technology, Austria, 2004.