Influence of elevated temperature on release of bound chlorides from chloride-admixed plain and blended cement pastes
Source abstract
Abstract
Abstract This paper is aimed to evaluate the influence of elevated temperature on the release of bound chloride ions from pastes made of ordinary Portland cement alone and a mixture of ordinary Portland cement and the partial replacements of cement with 10% silica fume (SF) and 50% ground granulated blast furnace slag (GGBS). Three ratios of water to binder (W/B) and four levels of total chloride ions were applied. The contents of free chloride ions and pH values in the pastes at different temperatures (0 °C, 20 °C, 40 °C and 60 °C) were determined by the measurements in the suspensions with 1:10 mass ratio of triturated paste powders to water. The results indicate that the increase of temperature can release partially the bound chloride ions. The amount of released chloride ion is dependent on the W/B ratio, content of total chloride ions and temperature range. Besides, the released chloride ions for the partial replacements of cement with 10% SF and 50% GGBS exhibits different trends with the temperature range. Furthermore, the influences of 10% SF and 50% GGBS on the corrosion risk of reinforcing steel at different temperatures are discussed by means of the index of Cl−/OH−.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete Corrosion and Durability · Concrete and Cement Materials Research · Smart Materials for Construction
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. Influence of CaCl2 and NaCl from different sources on chloride threshold value for the corrosion of steel reinforcement in concrete10.1016/j.conbuildmat.2010.07.023 ↗
2. Initial corrosion presented by chloride threshold penetration of concrete up to 10 year-results under marine site10.1016/j.conbuildmat.2012.07.061 ↗
3. Simulation studies of methods to delay corrosion and increase service life for cracked concrete exposed to chlorides10.1016/j.cemconcomp.2014.12.014 ↗
4. The role of hydrotalcite in chloride binding and corrosion protection in concretes with ground granulated blast furnace slag10.1016/j.cemconcomp.2012.04.009 ↗
5. Chloride binding in sound and carbonated cementitious materials with various types of binder10.1016/j.conbuildmat.2014.05.049 ↗
6. The effect of chloride binding on the predicted service life of RC pipe piles exposed to marine environments10.1016/j.oceaneng.2014.06.021 ↗
7. The effect of supplementary cementitious materials on chloride binding in hardened cement paste10.1016/j.cemconres.2011.01.001 ↗
8. Chloride binding of cement-based materials subjected to external chloride environment – a review10.1016/j.conbuildmat.2008.02.004 ↗
9. Differential acid neutralisation analysis10.1016/S0008-8846(99)00127-1 ↗
10. The participation of bound chloride in passive film breakdown on steel in concrete10.1016/S0010-938X(00)00040-8 ↗
11. Stability of Friedel’s salt in carbonated concrete structural elements10.1016/S0008-8846(96)85010-1 ↗
12. Accelerated carbonation of sewage sludge–cement–sand mortars and its environmental impact10.1016/S0008-8846(01)00573-7 ↗
13. Releases of bound chlorides from chloride-admixed plain and blended cement pastes subjected to sulfate attacks10.1016/j.conbuildmat.2013.03.068 ↗
14. The stability of bound chlorides in cement paste with sulfate attack10.1016/j.cemconres.2014.11.010 ↗
15. J. Geng, G. Easterbrook, Q. Liu, L. Li, Effect of carbonation on release of bound chlorides in chloride-contaminated concrete, Magaz. Concr. Res. (published online).
16. Effect of calcium chloride on the durability of pre-tensioned wire in prestressed concrete10.1680/macr.1962.14.42.143 ↗
17. Critical chloride content in reinforced concrete-a review10.1016/j.cemconres.2009.08.006 ↗
18. Chloride binding capacity and binding isotherms of OPC pastes and mortars10.1016/0008-8846(93)90089-R ↗
19. Chloride binding capacity of various hydrated cement paste systems10.1016/S1065-7355(97)90003-1 ↗