Experimental investigations of fabric material against projectile impacts
Source abstract
Abstract
Abstract Air supported structures made of PVC coated polyester fabric materials have been used in industrial and commercial building constructions. If they are used in cyclonic regions, the structure envelop might be impacted by windborne debris. The windborne debris might perforate the fabric material, which not only results in total collapse of the structure, flying debris at high speed also imposes threats to people and facilities inside the structure. In this study, the penetration resistant capability of PVC coated polyester fabric material commonly used in air supported structures construction was tested by using a pneumatic cannon system. The impact loading from windborne debris equivalent to a timber projectile of 4 kg mass as specified in the Australian Wind Loading Code (AS/NZS 1170.2:2011) was applied in the test. The failure and damage modes under various projectile impact scenarios were observed and compared. Its capability of resisting projectile impact was assessed. The performances of PVC coated polyester fabric material were examined quantitatively in terms of projectile residual velocity and energy absorption. The effects of various projectile velocity, impact location, fabric pretension and boundary condition on their penetration resistance performance were studied. The testing results will benefit construction designers involved in the fabric material applications in high wind speed area.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Structural Response to Dynamic Loads · High-Velocity Impact and Material Behavior · Transportation Safety and Impact Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. http://www.chinaairdome.com.
2. Finite element analysis of air supported membrane structures10.1016/S0045-7825(99)00428-4 ↗
3. Design and construction of a double membrane air-supported structure10.1016/S0141-0296(98)00031-5 ↗
4. Mechanical properties for preliminary design of structures made from PVC coated fabric10.1016/j.conbuildmat.2013.08.060 ↗
5. Tensile behavior of PVC-coated woven membrane materials under uni- and bi-axial loads10.1002/app.27303 ↗
6. Mechanical properties of Precontraint 1202S coated fabric under biaxial tensile test with different load ratios10.1016/j.conbuildmat.2015.01.074 ↗
7. On the anisotropic tensile behaviors of flexible polyvinyl chloride-coated fabrics10.1177/0040517507078791 ↗
8. Mechanical properties of polyvinyl chloride-coated fabric under cyclic tests
9. FEMA · 2008
10. Failure of structures due to extreme winds10.1061/JSDEAG.0003375 ↗
11. AS/NZS · 2011
12. Performance of structural insulated panels with rigid skins subjected to windborne debris impacts – experimental investigations10.1016/j.conbuildmat.2014.12.112 ↗
13. Experimental and numerical study of composite lightweight structural insulated panel with expanded polystyrene core against windborne debris impacts10.1016/j.matdes.2014.04.038 ↗
14. Failure analysis of corrugated panel subjected to windborne debris impacts10.1016/j.engfailanal.2014.05.017 ↗
15. Finite element description of nonlinear viscoelastic behaviour of technical fabric10.1016/j.conbuildmat.2008.06.002 ↗
16. A simple model describing the non-linear biaxial tensile behaviour of PVC-coated polyester fabrics for use in finite element analysis10.1016/j.compstruct.2009.04.016 ↗
17. Dynamic mechanical properties of fabric armour10.1016/S0734-743X(00)00038-5 ↗
18. Ballistic impact into fabric and compliant composite laminates10.1016/S0263-8223(03)00029-1 ↗
19. Numerical and experimental investigations into ballistic performance of hybrid fabric panels10.1016/j.compositesb.2013.10.019 ↗
20. Experimental and numerical investigation of fabric impact behavior10.1016/j.compositesb.2014.10.028 ↗
21. An experimental investigation of high velocity impact and penetration failure modes in textile composites10.1177/002199839903301202 ↗
22. Experimental investigation of high velocity ice impacts on woven carbon/epoxy composite panels10.1016/S1359-835X(02)00258-0 ↗
23. Finite-element modeling of the ballistic impact of fabric armor10.1016/S0734-743X(02)00031-3 ↗
24. Perforation of high-strength fabric by projectiles of different geometry10.1016/S0734-743X(02)00055-6 ↗
25. ASTM. Standard Specification for Performance of Exterior Windows, Curtain Walls. Doors and Strom Shutters Impacted by Windborne Debris in Hurricanes. ASTM E-1996, West Conshohocken, PA, 2001.
26. A study of Corrolink structural insulated panel (SIP) to windborne debris impacts10.4028/www.scientific.net/KEM.626.68 ↗
27. Experimental investigation of the behaviour of spiral steel fibre reinforced concrete beams subjected to drop-weight impact loads
28. Experimental investigations and numerical simulations of multi-arch double-layered panels under uniform impulsive loadings10.1016/j.ijimpeng.2013.08.012 ↗