Pavement interface damage behavior in tension monotonic loading
Source abstract
Abstract
Abstract The degradation of the bituminous pavement structures is due to the several external loads (climatic conditions and traffic) and the weak bond between layers. Thus, it is important to take into account the interface behavior in the pavement computational design which is never considered actually. In order to provide reliability and efficiency of the design methods, the interface characterization study is required. In this study, a monotonic tensile test was performed for better understanding of the global and local structure behavior by using the Digital Images Correlation (DIC) analysis. The obtained results allow us to characterize the constitutive law of interface and mechanical parameters such as: stiffness, damage evolution, and release rate energy.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Smart Materials for Construction
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (58)
Show source-provided references
1. LCPC–SETRA, Conception et dimensionnement des structures de chaussée, Paris, 1994.
2. Experimental and numerical analysis of a waterproofing adhesive layer used on concrete-bridge decks10.1016/j.ijadhadh.2008.12.001 ↗
3. C. Raab, M.N. Partl, Interlayer shear performance: experience with different pavement structures, in: Third Eurasphalt Eurobitume Congr., Vienna, 2004.
4. Mechanical testing of interlayer bonding in asphalt pavements advances in inter-laboratory testing and evaluation of bituminous materials
5. Test methods and influential factors for analysis of bonding between bituminous pavement layers10.1016/j.conbuildmat.2013.02.011 ↗
6. Layer characteristics affecting interlayer shear resistance in flexible pavements
7. Investigation of adhesion properties between asphaltic-concrete layers
8. Romanoschi · 1999
9. Influence of asphalt tack coat materials on interface shear strength10.3141/1789-06 ↗
10. R.C. West, J. Zhang, J. Moore, Evaluation of bond strength between pavement layers, 2005.
11. Effects of interface condition characteristics on open-graded friction course top-down cracking performance10.1080/14680629.2012.657051 ↗
12. M. Hun, A. Chabot, F. Hammoum, A four-point bending test for the bonding evaluation of composite pavement, RILEM Bookseries, vol. 4, 2012, pp. 51–60.10.1007/978-94-007-4566-7_6 ↗
13. Characterization of water sensitivity of asphalt mixtures with coaxial shear test10.1080/14680629.2008.9690116 ↗
14. Fracture-based friction model for pavement interface characterization10.3141/2057-07 ↗
15. Characterization of asphalt concrete layer interfaces10.3141/1778-16 ↗
16. J.-C. Roffe, F. Chaignon, Characterisation tests on bond coats: worldwide study, impact, tests, recommendations, in: Proceedings of the third International Conference on Bituminous Mixtures and Pavements, Held Thessaloniki, Greece, 2002, pp. 603–14.
17. Bikermann · 1961 · vol. vii
18. Nanoscale characterisation of interphase in silane treated glass fibre composites10.1016/S1359-835X(00)00163-9 ↗
19. The glass fiber–polymer matrix interface/interphase characterized by nanoscale imaging techniques10.1016/j.compscitech.2013.04.014 ↗
20. An interface model including cracks and roughness applied to masonry10.2174/1874149501408010263 ↗
21. Contribution to the modelling of interfaces in masonry construction10.1016/j.conbuildmat.2008.10.011 ↗
22. Friction and cohesion coefficients of composite concrete-to-concrete bond10.1016/j.cemconcomp.2014.10.003 ↗
23. Estimation of bond strength envelopes for old-to-new concrete interfaces based on a cylinder splitting test10.1016/j.conbuildmat.2010.09.032 ↗
24. Linear viscoelastic properties of bituminous materials: From binders to mastics
25. N.E. 12697-26, Bituminous mixtures – test methods for hot mix asphalt – Part 26: stiffness.
26. Determination of displacements using an improved digital correlation method10.1016/0262-8856(83)90064-1 ↗
27. An optical strain measurement system for asphalt mixtures10.1617/s11527-008-9392-8 ↗
28. Digital image correlation techniques to investigate strain fields and cracking phenomena in asphalt materials10.1617/s11527-014-0362-z ↗
29. Assessment of digital image correlation measurement errors: methodology and results10.1007/s11340-008-9204-7 ↗
30. Stress intensity factor measurements from digital image correlation: post-processing and integrated approaches10.1007/s10704-006-6631-2 ↗
31. Eedula · 2006
32. Investigation of bonding between asphalt layers on road construction10.1061/(ASCE)0733-947X(1995)121:4(309) ↗
33. Evaluation of bond strength of tack coat materials in field10.3141/2126-01 ↗
34. InstroTek Inc., ATackerTM A Tack Coat Testing Device, USA, 2003.
35. Development of fracture-energy based interface bond test for asphalt concrete10.1080/14680629.2012.657059 ↗
36. E. Santagata, F. Canestrari, Tensile and shear tests of interfaces in asphalt mixes: a new perspective on their failure criteria, in: Proceedings of the Second International Symposium on Highway Surfacing, 1994.
37. Investigation of the adhesion of bituminous pavements
38. Experimental investigation of tack coat fatigue performance: towards an improved lifetime assessment of pavement structure interfaces10.1016/j.conbuildmat.2010.06.064 ↗
39. B. Pouteau, J. Balay, A. Chabot, Fatigue test and mechanical study of adhesion between concrete and asphalt, in: Ninth International Symposium on Concrete Road, 2004.
40. Shear and flexural characterization of grid-reinforced asphalt pavements and relation with field distress evolution
41. NF EN 13036-1, Road and airfield surface characteristics – test methods – Part 1: measurement of pavement surface macrotexture depth using a volumetric patch technique, 2010.
42. Influence of surface macro-texture and binder dosage on the adhesion between bituminous pavement layers10.1016/j.conbuildmat.2011.08.029 ↗
43. Layer characteristics affecting interlayer shear resistance in flexible pavements
44. Interface roughness parameters and shear strength
45. Interlayer bond testing using a model material10.1016/j.conbuildmat.2011.06.009 ↗
46. NF EN 12697-6, Bituminous mixtures: test methods for hot mix asphalt, Part 6: determination of bulk density of bituminous specimens.
47. EN 13808, Bitumen and bituminous binders, Framework for specifying cationic bituminous emulsions.
48. La Photomécanique | Institut Pprime. Available: (accessed: 03-Sep-2015).
49. Three optical procedures for local large-strain measurement10.1111/j.1475-1305.2001.tb01237.x ↗
50. D.T. Christopoulos, Developing methods for identifying the inflection point of a convex/concave curve, MathNA, Aug. 2014, p. 29, Available from: ArXiv: 12065478v2.
51. Calibration of a structured-light projection system: development to large dimension objects10.1016/j.optlaseng.2011.10.020 ↗
52. Digital Surf, Mountains Map Software, Available: .
53. R. Abdelmoula, M. Coutris, J.-J. Marigo, Comportement asymptotique d’une interphase Clastique mince, Mécanique Solides Struct, Solids Struct., vol. t. 326, no. Série II b, 1998, pp. 237–242.10.1016/S1251-8069(98)80032-8 ↗
54. Asymptotic analysis of some non linear soft thin layers10.1016/j.compstruc.2004.03.074 ↗
55. Interlaminar interface modelling for the prediction of delamination10.1016/0263-8223(92)90060-P ↗
56. Kachanov · 1986
57. A damage computational approach for composites: basic aspects and micromechanical relations10.1007/BF00356486 ↗
58. A mesomodel for localisation and damage computation in laminates10.1016/S0045-7825(99)00214-5 ↗