journal article·2016-05

Performance of photocatalytic cementitious material: Influence of substrate surface microstructure

Fazhou Wang, Guoxin Sun, Wenqin Zhang, Lu Yang, Peng Liu

Publisher page

Abstract

Abstract Photocatalytic cementitious material (PCM) was prepared by porous magnesium oxychloride cement (PMOC) and TiO2 photocatalyst. Influences of PMOC substrate surface microstructure on TiO2 loading and photocatalytic performance had been investigated. The results revealed that loading effect mostly depends on PMOC substrate surface microstructure which could be controlled by its curing age. Appropriate interlaced microstructure enhanced TiO2 dispersity, loaded mass and adsorption capability. PCM-14d specimen (14-day curing before TiO2 loading) had the best photocatalytic performance, which could completely purify toluene (200 ppm) within 80 min. Practical simulation experiment indicated that PCM-14d specimen was 1.3 times better than nickel foam based photocatalytic material.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Oxide Properties and Applications · Bone Tissue Engineering Materials · Advanced Photocatalysis Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Indoor air purification using heterogeneous photocatalytic oxidation. Part II: kinetic study10.1016/j.apcatb.2010.05.032 ↗
2. Ag/Pt-modified TiO2 nanoparticles for toluene photooxidation in the gas phase10.1016/j.cattod.2013.11.044 ↗
3. Enhancement of photocatalytic activity of mesporous TiO2 powders by hydrothermal surface fluorination treatment10.1021/jp900136q ↗
4. Self-cleaning and depollution of fiber reinforced cement materials modified by neutral TiO2/SiO2 hydrosol photoactive coatings10.1016/j.apsusc.2013.12.171 ↗
5. Photocatalytic purification of volatile organic compounds in indoor air: a literature review10.1016/j.atmosenv.2009.01.034 ↗
6. The influence of TiO2 and ZnO powder mixtures on photocatalytic activity and rheological behavior of cement pastes10.1016/j.conbuildmat.2014.04.121 ↗
7. Full scale demonstration of air-purifying pavement10.1016/j.jhazmat.2013.02.012 ↗
8. Photocatalytic activity of semiconductor-modified cement—influence of semiconductor type and cement ageing10.1016/S0926-3373(02)00303-X ↗
9. Photocatalytic cementitious materials: influence of the microstructure of cement paste on photocatalytic pollution degradation10.1021/es902359s ↗
10. Effective dispersion of nano-TiO2 powder for enhancement of photocatalytic properties in cement mixes10.1016/j.conbuildmat.2012.11.057 ↗
11. Engineering photocatalytic cements: understanding TiO2 surface chemistry to control and modulate photocatalytic performances10.1111/j.1551-2916.2010.03838.x ↗
12. Incorporation of titanium dioxide nanoparticles in mortars – influence of microstructure in the hardened state properties and photocatalytic activity10.1016/j.cemconres.2012.09.007 ↗
13. Photoelectrochemical properties of TiO2 photocatalyst and its applications for environmental purification10.1016/j.jphotochemrev.2012.07.001 ↗
14. Effect of photocatalytic surface roughness on reactors effectiveness for indoor air cleaning10.1016/j.buildenv.2012.12.018 ↗
15. Fabrication and structural analysis of mesoporous silica–titania for environmental purification10.1016/j.micromeso.2013.08.039 ↗
16. Influence of molar ratios on properties of magnesium oxychloride cement10.1016/j.cemconres.2007.03.015 ↗
17. Effects of citric acid on hydration process and mechanical properties of thermal decomposed magnesium oxychloride cement10.1007/s11595-014-0877-8 ↗
18. Microstructures of magnesium oxychloride10.1617/s11527-007-9289-y ↗
19. A new method for preparing TiO2 catalyst honeycombs without sintering10.1007/s11164-012-0698-3 ↗
20. The hierarchical porous structure of substrate enhanced photocatalytic activity of TiO2/cementitious materials10.1016/j.conbuildmat.2014.04.073 ↗
21. Microstructure and properties of cement foams prepared by magnesium oxychloride cement10.1007/s11595-015-1149-y ↗
22. The formation mechanism of the hydrate phases in magnesium oxychloride cement10.1016/S0008-8846(98)00247-6 ↗
23. Microstructure of magnesium oxychloride cements10.1038/physci246079a0 ↗
24. Photoinduced reactivity of titanium dioxide10.1016/j.progsolidstchem.2004.08.001 ↗
25. Thick film titania on glass supports for vapour phase photocatalytic degradation of toluene, acetone, and ethanol10.1016/j.cej.2010.07.038 ↗
26. A facile and low-cost synthesis of granulated blast furnace slag-based cementitious material coupled with Fe2O3 catalyst for treatment of dye wastewater10.1016/j.apcatb.2013.02.025 ↗
27. Adsorption of C7 hydrocarbons on biporous SBA-15 mesoporous silica10.1021/la050135o ↗
28. Modelling and experimental study of the NOx photocatalytic degradation employing concrete pavement with titanium dioxide10.1016/j.cattod.2010.03.042 ↗
29. Behaviour of activated carbons with different pore size distributions and surface oxygen groups for benzene and toluene adsorption at low concentrations10.1016/j.carbon.2005.02.023 ↗
30. TiO2 deactivation during gas-phase photocatalytic oxidation of ethanol10.1016/S0920-5861(02)00224-9 ↗
31. Photocatalytic oxidation air cleaner: identification and quantification of by-products10.1016/j.buildenv.2013.10.014 ↗
32. Photocatalytic destruction of toluene and xylene at gas phase on a titania based monolithic catalyst10.1016/0920-5861(95)00317-7 ↗
33. Novel effect of significant enhancement of gas-phase photocatalytic efficiency for nano ZnO10.1016/j.cej.2012.10.004 ↗
34. Impact of design parameters on the performance of ultraviolet photocatalytic oxidation air cleaner10.1016/j.buildenv.2013.04.010 ↗
35. Kinetic studies of oxidation of ethylene over a TiO2 photocatalyst10.1016/S1010-6030(98)00448-1 ↗