Assessing the impact strength of steel fibre-reinforced concrete under quasi-static and high velocity dynamic impacts
Source abstract
Abstract
Abstract The behaviour of fibre-reinforced concrete under high velocity impact was assessed and compared to that for the quasi-static one. Two water cement ratios of 0.45 and 0.3 were used. Steel fibre at 1% by volume was used in the predetermined samples. The projectile method was used in the velocity range of 600–1130 m/s, and quasi-static impact by 3 m/s was performed. The results showed that in the both velocities conditions, the inclusion of fibre was a vital factor for integrity of the samples. In the quasi-static test, samples with 0.3 water cement ratio had better resistance. The dynamic impact resistance was belonging to the 0.45 water-cement ratio specimens. The failure modes of the quasi-static test were radial and diagonal in the normal and fibrous samples, respectively. The high velocity impact led to a shear failure in the non-fibrous, whereas, the projectile was penetrated into the fibrous samples target without fracturing.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Velocity Impact and Material Behavior · Structural Response to Dynamic Loads · Rock Mechanics and Modeling
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Fibre reinforced cement-based (FRC) composites after over 40years of development in building and civil engineering10.1016/j.compstruct.2008.03.006 ↗
2. Su · 1987 · 967
3. Banthia · 1987 · 1033
4. The effects of silica fume and polypropylene fibres on the impact resistance and mechanical properties of concrete10.1016/j.conbuildmat.2009.11.025 ↗
5. The effect of silica fume and steel fibre on the dynamic mechanical performance of high-strength concrete10.1016/S0008-8846(98)00235-X ↗
6. Some characteristics of high strength fibre reinforced lightweight aggregate concrete10.1016/S0958-9465(02)00016-1 ↗
7. Perforation of plain and fibre reinforced concretes subjected to low-velocity impact loading10.1016/0008-8846(93)90138-Y ↗
8. The effect of silica fume and steel fibre on the dynamic mechanical performance of high-strength concrete
9. Impact resistance of fibre reinforced concrete at subnormal temperatures10.1016/S0958-9465(98)00015-8 ↗
10. Chloride permeability and impact resistance of polypropylene-fiber reinforced silica fume concrete10.1016/S0008-8846(98)00073-8 ↗
11. Strength properties of nylon- and polypropylene fibre-reinforced concrete10.1016/j.cemconres.2004.06.033 ↗
12. Combined effect of silica fume and steel fibre on the impact resistance and mechanical properties of concrete10.1016/j.ijimpeng.2010.03.004 ↗
13. Effects of superplasticizer and curing conditions on properties of concrete with and without fibre10.1016/j.matlet.2008.02.064 ↗
14. Abrate · 2011 · vol. 526
15. Properties of confined fibre-reinforced concrete under uniaxial compressive impact10.1016/j.cemconres.2004.05.011 ↗
16. Impact resistance of steel fibrous concrete containing fibres of mixed aspect ratio10.1016/j.conbuildmat.2008.01.002 ↗
17. Statistical variations in impact resistance of steel fibre-reinforced concrete subjected to drop weight test10.1016/S0008-8846(99)00052-6 ↗
18. High velocity penetration of concrete targets with eroding long- rod projectiles; an experiment and analysis10.1260/2041-4196.5.1.47 ↗
19. Gebbeken · 2000
20. Impact resistance and test procedure for concrete
21. Analysis of resistance of concrete target against penetration of eroding long rod projectile regarding flow field around the projectile tip10.1016/j.ijimpeng.2013.01.009 ↗
22. Assessment of statistical variations in impact resistance of high-strength concrete and high-strength steel fiber -reinforced concrete10.1016/j.cemconres.2004.07.021 ↗
23. ACI Committee 544. State-of-the-art report on fibre reinforced concrete. ACI Committee 544 report 544. 1R-96. American Concrete Institute, Detroit, 1996.10.2208/jscej.1996.544_1 ↗
24. I. Lofgren, Fibre-reinforced concrete for industrial construction—a fracture mechanics approach to material testing and structural analysis. Thesis for the degree of doctor of philosophy, Goteborg, Sweden, 2005
25. Ghorbankhani · 2013
26. Investigation of the influence of curing temperature and silica fume content on setting and hardening process of the blended cement paste by an improved ultrasonic apparatus10.1016/j.conbuildmat.2012.01.011 ↗
27. The role of silica fume in the kinetics and mechanisms during the early stage of cement hydration10.1016/S0008-8846(00)00374-4 ↗
28. The effect of concrete target diameter on projectile deceleration and penetration depth10.1016/j.ijimpeng.2005.01.012 ↗
29. Dynamic spherical cavity expansion in a compressible elastic–plastic solid
30. Local impact effects of hard missiles on concrete targets10.1016/j.ijimpeng.2005.04.005 ↗
31. Damage evaluation of concrete plates by high-velocity impact10.1016/j.ijimpeng.2008.07.021 ↗
32. Dynamic behavior of concrete filled FRP tubes subjected to impact loading10.1016/j.engstruct.2015.06.012 ↗