Effects of temperature and sustained loading on the mechanical response of CFRP bonded to concrete
Source abstract
Abstract
Abstract Fiber reinforced polymer composites are commonly bonded to concrete structures for strengthening reasons, even though little is known about the evolution of bond strength while the strengthening systems are subject to sustained loads and elevated temperatures. This investigation uses single-lap shear specimens to examine the effects of sustained load and elevated temperature on the time-dependent deformation of a carbon fiber reinforced polymer (CFRP) composite bonded to concrete as well as the pull-off strength of the composite after the sustained loading period. Increased temperature during the sustained loading period led to increased slip of the CFRP, whereas increased curing time of the polymer resin prior to the sustained loading period led to reduced slip. Specimens that underwent sustained loading had increased pull-off strength and interfacial fracture energy following the sustained loading period. This beneficial effect was most significant for roughly 30 days of sustained loading. The analysis of strain distributions and fracture surfaces indicated that stress relaxation of the adhesive occurred in the 30 mm closest to the loaded end of the CFRP during sustained loading, which increased the pull-off strength provided the failure locus remained mostly in the concrete. For longer sustained loading times, the bond failure locus shifted to the epoxy/concrete interface, which diminished part of the strength increase brought on by the stress relaxation of the adhesive.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Innovative concrete reinforcement materials · Concrete Corrosion and Durability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Teng · 2001
2. 2008
3. Anchorage strength models for FRP and steel plates bonded to concrete10.1061/(ASCE)0733-9445(2001)127:7(784) ↗
4. Prediction of interfacial bond failure of FRP-concrete surface10.1061/(ASCE)1090-0268(2007)11:4(427) ↗
5. Experimental and numerical study of moisture effects on the bond fracture energy of FRP/Concrete joints10.1177/0731684407082952 ↗
6. Deterioration of FRP/concrete bond system under variable moisture conditions quantified by fracture mechanics10.1016/j.compositesb.2010.11.002 ↗
7. An experimental study of GFRP-to-concrete interfaces submitted to humidity cycles10.1016/j.compstruct.2013.12.014 ↗
8. Bond durability factor for externally bonded CFRP systems in concrete10.1061/(ASCE)CC.1943-5614.0000587 ↗
9. Durability evaluation of glass fiber reinforced-polymer-concrete bonded interfaces10.1061/(ASCE)1090-0268(2005)9:4(348) ↗
10. Nonlinear constitutive model for time-dependent behavior of FRP-concrete interface10.1016/j.compscitech.2007.01.018 ↗
11. Sustained loading and temperature response of fiber-reinforced polymer-concrete bond10.3141/2131-15 ↗
12. The effect of long-term loading on the CFRP-concrete bonding strength
13. Experimental and analytical investigations of creep of epoxy adhesive at the concrete-FRP interfaces10.1016/j.ijadhadh.2008.01.003 ↗
14. Stress redistribution along the interface between concrete and FRP Subject to long-term loading10.1260/136943309789867926 ↗
15. Creep behavior of adhesives used for external FRP strengthening of RC structures10.1016/j.conbuildmat.2010.01.002 ↗
16. Flexural time-dependent cracking and post-cracking behaviour of FRP strengthened concrete beams10.1016/j.ijsolstr.2012.03.001 ↗
17. Interface stress redistribution in FRP-strengthened reinforced concrete beams using a three-parameter viscoelastic foundation model10.1016/j.compositesb.2012.05.042 ↗
18. 2010
19. Jaipuriar · 2011
20. Digital imaging techniques in experimental stress analysis10.1117/12.7972925 ↗
21. Non-contact measuring techniques to characterize deformation on FRP Uwrap anchors
22. Eberl
23. Development of the nonlinear bond stress-slip model of fiber reinforced plastics sheet-concrete interfaces with a simple method10.1061/(ASCE)1090-0268(2005)9:1(52) ↗
24. Bond-slip model for FRP laminates externally bonded to concrete at elevated temperature10.1061/(ASCE)CC.1943-5614.0000337 ↗
25. Strengthening of concrete prisms using the plate-bonding technique10.1007/BF00013161 ↗
26. An improved damage modelling to deal with the variability of fracture mechanisms in FRP reinforced concrete structures10.1016/j.ijadhadh.2013.03.009 ↗
27. Jeong · 2014