journal article·2023-08

Effects and interactions of scouring abrasion and external sulfate attack on deterioration of lining concrete: Experiments and preliminary modeling

Kun Wang, Yuanyuan Cheng, Lin Yang, Benbo Sun, Peng Zhang, Jinjun Guo

Publisher page

Abstract

The conventional tests of dynamic water scouring abrasion (DWSA) on lining concrete for hydraulic discharge tunnel do not consider concomitant sulfate ions that may exist in aggressive aqueous environment and alter the mechanisms and deterioration kinetics of DWSA. In this study, an abrasion-erosion testing system based on natural conditions of the environment has been used to evaluate the influence of volumetric concentration of sediment and the velocity of the scouring flow on abrasion-erosion synergism of lining concrete. To this end, lining concretes were subjected ambient conditions similar to that in drainage tunnel, spillway and stilling basin geographic locations, while implementing abrasion and accelerated external sulfate attack (ESA) test alternately prior to various physical and microstructural analyses. A dynamically decrease of properties on a macroscopic scale was observed, as well as an increase of precipitated ettringite, leached calcium, harmful pore (>200 nm) and sheeted radial micro-cracks, in lining concretes exposed to sediment-laden flow simulated for discharge, which were involved in the co-occurrence of complex degradation mechanisms in specimens exposed to DWSA-ESA. Results indicate that a water body with a high-velocity flow and a high sediment concentration significantly accelerates the sulfate attack on concrete. In contrast, a water body with a low-velocity flow and a low concentration of sediment alleviates the traverse of sulfate ions in concrete due to the inside-out pressure potential. The implications of these synoptic findings may informatively improve the design of abrasion and erosion resistance for concrete when dual exposure to ESA and abrasion is occurred in hydraulic tunnel engineering.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Concrete Corrosion and Durability · Erosion and Abrasive Machining

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. Long-term sulfate resistance of synthesized cement systems with variable C3A/C4AF ratio at low temperature or ambient conditions: Insights into the crystalline and amorphous phase assemblage10.1016/j.cemconres.2022.106902 ↗
2. Sulfate resistance and phase composition of shotcrete10.1016/j.tust.2020.103760 ↗
3. Scouring abrasion properties of nanomodified concrete under the action of chloride diffusion10.1016/j.conbuildmat.2019.02.161 ↗
4. Experimental Evidence that Micro and Macrostructural Surface Properties Markedly Influence on Abrasion Resistance of Concretes10.1016/j.wear.2019.01.063 ↗
5. Abrasion resistance of high-strength concrete in hydraulic structures
6. The model of abrasive wear of concrete in hydraulic structures10.1016/S0043-1648(03)00525-8 ↗
7. Neural modelling of the depth of wear determined using the rotating-cutter method for concrete with a high volume of high-calcium fly ash10.1016/j.wear.2021.203791 ↗
8. Performance of concrete under accelerated physical salt attack and carbonation
9. Influence of load-induced cracks coupled or not with top-casting-induced defects on the corrosion of the longitudinal tensile reinforcement of naturally corroded beams exposed to chloride environment under sustained loading10.1016/j.cemconres.2020.105972 ↗
10. Chloride ion transport performance of lining concrete under coupling the action of flowing groundwater and loading10.1016/j.cemconcomp.2021.104166 ↗
11. Study on the bond behavior of steel bars embedded in concrete under the coupling of sustained loads and chloride ion erosion
12. Tension and bonding behaviour of steel-FRP composite bars subjected to the coupling effects of chloride corrosion and load10.1016/j.conbuildmat.2021.123641 ↗
13. A 3D multi-phase meso-scale model for modelling coupling of damage and transport properties in concrete10.1016/j.cemconcomp.2020.103545 ↗
14. Hydro-abrasive erosion of steel-fibre reinforced hydraulic concrete10.1016/S0043-1648(02)00215-6 ↗
15. Effect of dry–wet ratio on sulfate transport-reaction mechanism in concrete10.1016/j.conbuildmat.2021.124418 ↗
16. Effect of dry-wet ratio on properties of concrete under sulfate attack10.3390/ma12172755 ↗
17. Multiphysical damage characteristics of concrete exposed to external sulfate attack: Elucidating effect of drying–wetting cycles10.1016/j.conbuildmat.2022.127143 ↗
18. Salt weathering distress on concrete exposed to sodium sulfate environment
19. Salt weathering of concrete by sodium carbonate and sodium chloride
20. Effect of binder content and recycled concrete aggregate on freeze-thaw and sulfate resistance of GGBFS based geopolymer concretes10.1016/j.conbuildmat.2021.124246 ↗
21. On the competitive antagonism effect in combined chloride-sulfate attack: a numerical exploration10.1016/j.cemconres.2021.106406 ↗
22. Resistance of carbonation-cured belite-rich cement mortar to adverse environments: magnesium sulfate and sulfuric acid exposure10.1016/j.cemconcomp.2022.104781 ↗
23. Degradation mechanism of cement mortar exposed to combined sulfate–chloride attack under cyclic wetting–drying condition10.1617/s11527-021-01734-6 ↗
24. Effect of hydraulic parameters on abrasion erosion of fiber reinforced concrete in hydraulic structures10.1016/j.conbuildmat.2020.120966 ↗
25. Effect of waste tire rubber particles on concrete abrasion resistance under high-speed water flow10.1186/s40069-021-00475-8 ↗
26. The influence of aggregate type on the strength and abrasion resistance of high strength concrete10.1016/j.cemconcomp.2007.05.011 ↗
27. The role of porosity in external sulphate attack
28. Pore size analyses of cement paste exposed to external sulfate attack and delayed ettringite formation10.1016/j.cemconres.2019.05.011 ↗
29. Salt damage in porous materials: how high supersaturations are generated10.1016/S0022-0248(02)01429-X ↗
30. ASTM C1138–12 · 2012
31. DL/T 5150-2001. Test code for hydraulic concrete; Chinese Standard Institution Press: Beijing, China, 2001.
32. DL/T 5207-2005. Technical specification for abrasion and cavitation resistance of concrete in hydraulic structures; Chinese Standard Institution Press: Beijing, China, 2005.
33. SL/T352-2020. Test code for hydraulic concrete; Chinese Standard Institution Press: Beijing, China, 2020.
34. JGJ55-2011. Specification for mix proportion design of ordinary concrete; Chinese Standard Institution Press: Beijing, China, 2011.
35. GB/T 50082-2009.Standard for Test Method of Long-Term Performance and Durability of Ordinary Concrete; Chinese Standard Institution Press: Beijing, China, 2009.
36. A generalization of Bernoulli's theorem10.1175/1520-0469(1993)050<1437:AGOBT>2.0.CO;2 ↗
37. Low-gravity sensing of liquid/vapor interface and transient liquid flow10.1109/T-UFFC.1987.26934 ↗
38. Discovering mathematics: a problem-solving approach to mathematical analysis with mathematica and maple
39. An Introduction to Crystal Chemistry10.1021/ja01079a042 ↗
40. Resistance to sulfate attack and underwater abrasion of fiber reinforced cement mortar10.1016/j.conbuildmat.2018.09.043 ↗
41. Erosion of surfaces by solid particles10.1016/0043-1648(60)90055-7 ↗
42. The influence of impingement angle on the erosion of ductile metals by angular abrasive particles10.1016/0043-1648(92)90206-N ↗
43. Particle size distribution effects on the solid particle erosion of brittle materials10.1016/0043-1648(81)90232-5 ↗
44. Experimental study on abrasion resistance of brittle materials such as concrete in clear water and sand-carrying water flow
45. Study on test method of erosion wear of hydraulic concrete