journal article·2017-09

Mechanical behavior and constitutive relationship of mud with cement and fly ash

Wanlu Zhang, Yonghui Chen, Lunyang Zhao, Long Chen

Publisher page

Abstract

Abstract In this study, various tests were carried out in order to evaluate the suitability of stabilising high water content waste mud as a fill material. The unconfined compressive strength and elastic modulus of mud treated with different stabilizers were determined. Besides, the relevant micro-structural changes were observed by conducting scanning electron microscopy (SEM). The effects of stabilizers at regular dosage yields (9%) were compared and the optimal additive combination of cement and ash that exhibited favorable strength and elastic modulus was identified accordingly. A field-simulated undrained shear test on the cement and fly ash (FA) mud treated for various curing times (7 and 28 days) was run and the constitutive relationships were derived. The cohesive intercept decreased and failure friction increased over time, while shear strength between the treated mud at 7 and 28 curing days decreased as confining pressure increased. This implies that heaping preloading and other methods imposed during the initial stages of mud treatment can dramatically enhance its strength and reduce the necessary curing time.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microbial Applications in Construction Materials · Concrete and Cement Materials Research · Recycled Aggregate Concrete Performance

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. A review of approaches and techniques used in aquatic contaminated sediments: metal removal and stabilization by chemical and biotechnological processes10.1016/j.jclepro.2014.08.009 ↗
2. An in situ method for translation of acid sludge to modified asphalt paving materials10.1016/j.conbuildmat.2011.12.057 ↗
3. Effects of stabilization on resilient characteristics of fly ash as pavement material10.1016/j.conbuildmat.2013.12.029 ↗
4. Use of wastewater sludge for base and subbase of road pavements10.1016/j.trd.2014.06.007 ↗
5. Compressibility behaviour of lime-treated marine clay10.1016/S0029-8018(01)00010-5 ↗
6. Compressive strength of cement stabilized fly ash-soil mixtures10.1016/S0008-8846(99)00018-6 ↗
7. Utilization of a very high lime fly ash for improvement of Izmir clay10.1016/j.buildenv.2004.12.009 ↗
8. Experiences of dry soil mixing in organic soils10.1680/grim.2012.165.1.3 ↗
9. Improvement of water-stability of clay aggregates admixed with aqueous polymer soil stabilizers10.1016/j.catena.2008.12.016 ↗
10. Soil treatment with organic non-traditional additives for the improvement of earthworks10.1007/s11440-013-0251-6 ↗
11. Research on the stabilization treatment of clay slope topsoil by organic polymer soil stabilizer10.1016/j.enggeo.2010.10.011 ↗
12. Stabilisation of clayey soils with high calcium fly ash and cement10.1016/j.cemconcomp.2004.02.019 ↗
13. L. Shao, S. Liu, Y. Du, F. Jing, L. Fang. Experimental study on the stabilization of organic clay with fly ash and cement mixed method, Geocongress, 2008.10.1061/40972(311)3 ↗
14. K.R. Reddy, S.K. Saxena, Constitutive modeling of cemented sand, Mech. Mater., 1992.10.1016/0167-6636(92)90012-3 ↗
15. Nonlinear elastic behavior of bitumen emulsion-stabilized materials with C&D waste aggregates10.1016/j.conbuildmat.2015.07.004 ↗
16. Undrained shear behavior of cement admixed clay at high water content10.1061/(ASCE)1090-0241(2004)130:10(1096) ↗
17. Standard · 2004
18. Analysis and design of a stabilized fly ash as pavement base material10.1016/j.fuel.2006.05.017 ↗
19. M. Mokhlesur, P. Rahman, A. Taher, M.Z. Rabbi, A. Siddique. Strength and deformation characteristics of cement treated soft Bangladesh clays, 2011.
20. Strength verification of stabilised soil-cement columns: a laboratory investigation of the Push-In Resistance Test (PIRT)10.1139/cgj-2016-0230 ↗