journal article·2017-12

Inter-laboratory variability results of porous building materials hygrothermal properties

O. López, I. Torres, A.S. Guimarães, J.M.P.Q. Delgado, V.P. de Freitas

Publisher page

Abstract

Abstract The knowledge of material properties to predict heat and moisture transport in buildings is essential to well characterize their behavior and predict pathologies. Nowadays it is quite common the use of hygrothermal simulation programs to predict building materials and components hygrothermal performance and those programs need, as inputs, the material properties. Bearing this in mind this study is focused on the analysis and discussion of properties used in different models, its availability and reliability. Laboratory test results to determine some hygrothermal properties of two common materials in walls of historical buildings: a lime natural stone and a lime mortar were developed. Some of these tests were performed by two laboratories involved in a project and the main idea is to present and compare the obtained results also comparing with database values.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hygrothermal properties of building materials · Building materials and conservation · Masonry and Concrete Structural Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. W. Obeid, Modélisation du couplage thermo-hygromécanique en milieux poreux non saturés-application au cas du mortier de ciment, Thèse, Ècole Nationale des ponts et chaussées, December 1998.
2. Simultaneous transfer of heat and moisture in porous media10.1029/TR039i005p00909 ↗
3. The theory of heat and moisture transfer in porous media revisited10.1016/0017-9310(87)90166-9 ↗
4. US Department of Energy Webpage, Building energy software tools directory, 2008. http://www.eere.energy.gov/buildings/tools directory, accessed 18 September.
5. H. Hens, A. Janssens, Enquiry on HAMCat Codes, IEA Annex 24-Task 1 – Modelling – International Energy Agency, 1993.
6. A.N. Karagiozis, Advanced Numerical Models for Hygrothermal Research, Manual on Moisture Analysis Buildings, 2001, pp. 90–103.
7. Modeling heat, air and moisture transport through building materials and components
8. T. Ojanen, Evaluation of simulation model TCCC2D using simplified weather data and material properties, in: Proceedings of IEA-ANNEX 24 on heat, air and moisture transport in highly insulated envelope arts, Espoo, Finland, September, 1996.
9. Hygrothermal properties of lightweight concrete: Experiments and numerical fitting study10.1016/j.conbuildmat.2012.11.045 ↗
10. Hygrothermal study of lightweight concrete hollow bricks: A new proposed experimental-numerical method10.1016/j.enbuild.2013.11.060 ↗
11. Water vapour desorption variability of in situ concrete and effects on drying simulations10.1680/macr.9.00161 ↗
12. Moisture characterization of cementitious material properties: Assessment of water vapor sorption isotherm and permeability variation with ages10.1016/j.conbuildmat.2015.03.030 ↗
13. Torres · 2004
14. Delamination of Ançã limestone due to sodium sulfate under different environmental conditions as studied by nuclear magnetic resonance
15. R. Cerny, J. Drchalová, A. Kunca, V. Tydlitát, Thermal and hygric properties oh lime plasters with pozzolonic admixtures for historical buildings, in: Proceedings of the 2nd international conference on building physics, pp. 27–33 – Leuven, Belgium, 14/18 de September 2003.10.1201/9781003078852-7 ↗
16. EN 998-1:2016, Specification for mortar for masonry. Rendering and plastering mortar.
17. Künzel · 1994
18. EN 15026:2007, Hygrothermal performance of building components and building elements – assessment of moisture transfer by numerical simulation.
19. A. Holm, H.M. Künzel, Two-dimensional transient heat and moisture simulations of rising dump with WUFI-2D, in: 2nd Int. Conference on Building Physics, Leuven, Belgium (2003), pp. 363–367.10.1201/9781003078852-52 ↗
20. M. Krus, Moisture transport and storage coefficients of porous mineral building materials. Theoretical principles and new test methods, Fraunhofer IRB Verlag, Stuttgart, Germany, 1996.
21. R. Tye, Relevant moisture properties of building construction materials, Manual on moisture control in buildings, pp. 35–43.
22. EN ISO 10545-3:1995, Ceramic tiles – Part 3: Determination of water absorption, apparent porosity, apparent relative density and bulk density.
23. BS EN 12390-7:2000, Testing hardened concrete. Density of hardened concrete.
24. BS EN 772-13:2000, Methods of test for masonry units. Determination of net and gross dry density of masonry units (except for natural stone).
25. ISO 8302:1991, Thermal insulation – Determination of steady-state thermal resistance and related properties – Guarded hot plate apparatus.
26. BS EN 12664:2001, Thermal performance of building materials and products. Determination of thermal resistance by means of guarded hot plate and heat flow meter methods. Dry and moist products of medium and low thermal resistance.
27. BS EN 12667:2001, Thermal performance of building materials and products. Determination of thermal resistance by means of guarded hot plate and heat flow meter methods. Products of high and medium thermal resistance.
28. BS EN 12939:2001, Thermal performance of building materials and products. Determination of thermal resistance by means of guarded hot plate and heat flow meter methods. Thick products of high and medium thermal resistance.
29. ISO 12571:2000, Hygrothermal performance of building materials and products – Determination of hygroscopic sorption properties.
30. E. Bergheim, S. Geving, B. Teme, Hygroscopic material properties -Water vapour permeability and hygroscopic sorption curves for materials used in a test house, Project report 234-1998, Norwegian Building and Construction Research Institute, 1998.
31. M.H. Hansen, G. Houvenaghel, M. Janz, M. Krus, K. Stromdahl, Interlaboratory comparison of the measurement of retention curves, in: Proceedings of W40 Meeting-Heat and Moisture Transfer in Buildings; Kyoto; Japão; 7/10 Outubro 1997, pp. 443–455.
32. R. Miniotaité, Sorption-desorption of construction materials, in: Proceedings of the 6th Symposium on Building Physics in the Nordic Countries, vol. 1, Trondheim, June 2002, pp. 437–443.
33. The effect of temperature on the moisture permeability of building materials10.1080/09613210050073706 ↗
34. M.K. Kumaran, Interlaboratory comparison of ASTM E96-95, Standard test methods for water vapor transmission of materials, Proceedings of W40 Meeting-Heat and Moisture Transfer in Buildings; Kyoto; Japan; 7/10 October 1997; pp. 443–455.
35. ISO 12572:2001, Hygrothermal performance of building materials and products – Determination of water vapour transmission properties.
36. ISO 15148:2002, Hygrothermal performance of building materials and products – Determination of water absorption coefficient by partial immersion.
37. M. Krus, A. Holm, Simple methods to approximate the liquid transport coefficients describing the absorption and drying, in: Proceedings of the 5th Symposium on Building Physics in the Nordic Countries, vol. 1, pp. 241-248; Göteborg, 24/26 Agosto 1999.
38. CEN, EN ISO 10456:2007, Building Materials and Products – Procedures for Determining Declared and Design Thermal Values. Geneva, Switzerland: International Standards Organization.
39. BS, EN 12524:2000, Building Materials and Products – Hygrothermal Properties – Tabulated Design Values. London: British Standards.
40. V.P. Freitas, I. Torres, A.S. Guimarães, Rising Damp, FEUP Edições, Porto, ISBN 978-972-101-2, 2008. [in Portuguese].
41. NP EN 1936:2008, Métodos de ensaio para pedra natural. Determinação das massas volúmicas real e aparente e das porosidades total e aberta [in Portuguese].
42. ISO 12571:2013, Hygrothermal performance of building materials and products – Determination of hygroscopic sorption properties.
43. BS EN 12524:2000, Building materials and products. Hygrothermal properties. Tabulated design values.
44. ISO 15148:2002, Hygrothermal performance of building materials and products – Determination of water absorption coefficient by partial immersion.
45. Miller · 1988
46. Snedecor · 1989
47. Sample criteria for testing outlying observations10.1214/aoms/1177729885 ↗
48. Procedures for detecting outlying observations in samples10.1080/00401706.1969.10490657 ↗
49. Rejecting outliers in factorial designs10.1080/00401706.1972.10488930 ↗
50. Ventilation system for drying out buildings after a flood: influence of the building material10.1080/07373937.2016.1225084 ↗
51. Treatment of rising damp in historical buildings: wall base ventilation system10.1016/j.buildenv.2005.07.034 ↗
52. Analysis and monitoring of the drying process of a hydro-regulated wall base ventilation system implemented in a historical church to control rising damp10.1080/07373937.2012.737395 ↗
53. Ventilation system for drying out buildings after a flood10.1007/978-981-10-0651-7_3 ↗
54. Ventilation system for drying out buildings after a flood: influence of the air change rate on the drying process10.1080/07373937.2015.1112810 ↗