journal article·2019-02

Influence of saturated activated carbon on the rheological and mechanical properties of cementitious materials

Massinissa Lekkam, Abdelbaki Benmounah, El-Hadj Kadri, Hamza Soualhi, Abdelhak Kaci

Publisher page

Abstract

Abstract This work proposes a new investigation, which deals with the potentiality of the reuse of saturated activated carbon (SAC), as an additive into cementitious materials. According to recent studies, the addition of a small amount of activated carbon can considerably increase the adsorption of harmful gases; which limits environmental pollution. However, taking into consideration the high porosity of activated carbon, which gives a large specific area, this solution may present certain disadvantages in the rheological and mechanical behavior. Therefore, eight mixtures (four pastes and four mortars) were prepared with different percentages of activated carbon waste (0.5%, 1%, 2% and 4%), then they were compared with the reference mixture. The fluidity and the setting time were measured for the pastes. Whereas, rheological parameters, compressive strength and microstructure were studied for each mortar. The experimental results have shown that if the percentage of substitution is less than 2%, the SAC can be used as an organic additive in the cementitious materials without affecting the fluidity and the mechanical strength. However, when the amount of SAC is more than 2%, the viscosity and yield stress of the mortars increase.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Building materials and conservation

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (66)

Show source-provided references
1. Comparison indices for design and proportioning of concrete mixtures taking environmental impacts into account10.1016/j.cemconcomp.2016.02.002 ↗
2. Construction materials and the environment10.1146/annurev.energy.29.062403.102215 ↗
3. Material efficiency: providing material services with less material production
4. UNICEM, “L’Union nationale des industries de carrières et matériaux de construction,” 2015. [Online]. Available: http://www.unicem.fr.
5. Green house gas emissions due to concrete manufacture
6. Accelerated carbonation of concrete with high content of mineral additions: Effect of interactions between hydration and drying10.1016/j.cemconres.2012.10.008 ↗
7. SNBPE, “Fiches de, Déclaration Environnementale et Sanitaire publiées par le Syndacat National du Béton Prêt à l’Emploi” [Online]. Available 2011 http://www.snbpe.org.
8. Mechanisms of NO x entrapment into hydrated cement paste containing activated carbon–influences of the temperature and carbonation10.1016/j.cemconres.2013.06.006 ↗
9. Formation of strong airway irritants in mixtures of isoprene/ozone and isoprene/ozone/nitrogen dioxide10.1289/ehp.01109937 ↗
10. Relationship between outdoor and indoor air quality in eight French schools10.1111/j.1600-0668.2004.00263.x ↗
11. Climat Réseau Action Règlementation européenne sur les émissions de CO2 des véhicules particuliers [Online]. Available 2013 http://www.reseauactionclimat.org.
12. Organisation Mondiale de la Santé, “Lignes directices relatives à la qualité de l’air: particules, ozone, dioxyde d’azote et dioxyde de soufre,” 2005.
13. COP21, “Conference of the Parties”, in: Conference of the Parties, 2015, vol. 21932, pp. 1–32.
14. Rheology of ordinary and low-impact environmental concretes10.1080/01694243.2015.1059641 ↗
15. F. Collet, S. Prétot, “Variation de la capacité hydriques tampon de bétons de chanvre en fonction de la formulation,” in: Ecobat Sciences et Techniques 1ère édition, 2012.
16. Properties of concrete incorporating fine recycled aggregates from crushed concrete wastes10.1016/j.conbuildmat.2016.02.154 ↗
17. The effect of ultra-fine admixture on the rheological property of cement paste10.1016/S0008-8846(00)00236-2 ↗
18. Influence of crushed aggregate fines with micro-proportioned particle size distributions on rheology of cement paste10.1016/j.cemconcomp.2017.02.012 ↗
19. Effect of crushed sand and limestone crushed sand dust on the rheology of cement mortar abstract
20. Influence of initial steam curing and different types of mineral additives on mechanical and durability properties of self-compacting concrete10.1016/j.conbuildmat.2014.09.072 ↗
21. Properties of concrete modified with mineral additives10.1016/j.conbuildmat.2016.12.215 ↗
22. On void structure and strength of foamed concrete made without/with additives10.1016/j.conbuildmat.2015.03.093 ↗
23. Effect of limestone powder as a partial replacement of crushed quarry sand on properties of self-compacting repair mortars10.34118/jbms.v3i1.21 ↗
24. Use of different limestone and chalk powders in self-compacting concrete
25. Use of viscosity-modifying admixture to enhance stability of fluid concrete
26. NO x de-pollution by hardened concrete and the in fl uence of activated charcoal additions10.1016/j.cemconres.2012.06.007 ↗
27. NOx De – pollution Using Activated Charcoal Concrete – From Laboratory Experiments to Tests with Prototype Garages
28. Reactivity of volatile organic compounds with hydrated cement paste containing activated carbon10.1016/j.buildenv.2015.01.025 ↗
29. Reactivity of NO 2 and CO 2 with hardened cement paste containing activated carbon
30. Prediction of adsorption from aqueous phase of organic molecules as a function of some physicochemical characteristics of activated carbons10.2166/wqrj.2001.034 ↗
31. Modifying activated carbon with hybrid ligands for enhancing aqueous mercury removal10.1016/j.carbon.2009.03.047 ↗
32. Effect of activated carbons modification on porosity, surface structure and phenol adsorption10.1016/j.jhazmat.2007.06.005 ↗
33. Adsorption of VOC on modified activated carbon fiber10.1007/s10934-008-9228-5 ↗
34. Performance test for evaluating the reduction of VOCs in rooms and evaluating the lifetime of sorptive building materials10.1016/j.buildenv.2008.02.013 ↗
35. BP, British Petroleum, “Statistical Review of World Energy 2017,” 2017, no. 66, pp. 1–52.
36. Texture des matériaux pulvérulents ou poreux
37. Valorisation des déchets de la filière ” bois ” en deux etapes : isolation des molécules extractibles puis fabrication de charbon actif : cas du pin maritime
38. “Journal of Environmental Chemical Engineering Valorization of co ff ee grounds into activated carbon using physic — chemical activation by
39. Orthophosphate removal from domestic wastewater using limestone and granular activated carbon10.1016/j.desal.2010.12.046 ↗
40. Titanium dioxide-modified activated carbon for advanced drinking water treatment10.1016/j.psep.2016.07.013 ↗
41. F. Rouquerol, J. Rouquerol, K.S.W. Sing, “Adsorption by powders and porous solids,” London, 1999.
42. Cours Isothermes de sorption : modèles et détermination, Université
43. Activated Carbons from Almond Shells-II10.1016/0008-6223(84)90128-3 ↗
44. Physisorption of Nitrogen and Oxygen by MCM-41, a Model Mesoporous Adsorbent10.1039/c39930001257 ↗
45. A Vane rheometer for fresh mortar: development and validation abstract
46. M. Nadjib and O. Æ. Karima, “Influence des fumées de silice surl’ évolution de l’ hydratation des pâtes de chaux ou de Ciment Portland,” pp. 703–710, 2007.10.1617/s11527-006-9183-z ↗
47. Role of the filler on Portland cement hydration at very early ages : Rheological behaviour of their fresh cement pastes10.1016/j.conbuildmat.2017.06.006 ↗
48. Effect of powdered activated carbon on the air void characteristics of concrete containing fly ash10.1016/j.conbuildmat.2015.01.019 ↗
49. Cement and Concrete Research E ff ect of graphite nanoplatelets and carbon nano fi bers on rheology, hydration, shrinkage, mechanical properties, and microstructure of UHPC
50. H. Le Chatelier, “Observations préliminaires au sujet de la décomposition des ciments à la mer”. 1904.
51. M. Pigeon, “Composition et hydratation du ciment Portland,” in: Progrès dans le domaine du béton, 1981, pp. 36–72.
52. The effect of powder type on the setting time and self compactability of mortar10.1016/j.conbuildmat.2012.04.079 ↗
53. The secondary effects of lignosulfonate cement retarder on cement slurry properties
54. Rheology as a tool in concrete science : The use of rheographs and workability boxes10.1016/j.cemconres.2011.01.009 ↗
55. Additivity effects in the rheology of fresh concrete containing water-reducing admixtures10.1016/j.conbuildmat.2010.12.001 ↗
56. Evaluation of rheological parameters of mortar containing various amounts of mineral addition with polycarboxylate superplasticizer10.1016/j.conbuildmat.2014.07.111 ↗
57. Fresh concrete rheology : recent developments
58. Rheologie et rheometrie des betons. application aux betons autonivelants
59. New model to estimate plastic viscosity of eco-friendly and conventional concrete10.1016/j.conbuildmat.2017.01.009 ↗
60. Feasibility of waste marble powder in concrete as partial substitution of cement and sand amalgam for sustainable growth10.1016/j.jobe.2017.11.024 ↗
61. Fine aggregate substitution by granular activated carbon can improve physical and mechanical properties of cement mortars10.1016/j.conbuildmat.2017.12.181 ↗
62. Effect of particle size distributions on the rheology of concentrated bimodal suspensions of concentrated bimodal suspensions10.1122/1.550497 ↗
63. Effects of the fineness of limestone powder and cement on the hydration and strength development of PLC concrete10.1016/j.conbuildmat.2016.12.189 ↗
64. Mechanical, durability and microstructure properties of Cold Asphalt Emulsion Mixtures with different types of filler10.1016/j.conbuildmat.2016.03.112 ↗
65. Physical and chemical properties of concrete using GGBFS-KR10.1016/j.conbuildmat.2016.07.023 ↗
66. Effects of aluminate rich slag on compressive strength, drying shrinkage and microstructure of blast furnace slag cement10.1016/j.conbuildmat.2017.02.111 ↗