journal article·2019-02Open access

Concrete strength reduction due to over compaction

Ryan Howes, Muhammad N.S. Hadi, Warren South

Abstract

Abstract The purpose of this study was to evaluate the effect of over-compaction on the strength of concrete with regards to commercial and industry practices. Normal concrete, which is commonly used in construction was chosen. Samples were cast using a varying vibration time and testing was performed to determine concrete compressive strength, air content, density and a measure for segregation. These parameters were used to determine the relative sensitivity of concrete to under- versus over-compaction. If segregation was present, it was hypothesized the results would indicate a mathematical relationship between the segregation and strength reduction. This relationship would allow for determination of an optimum vibration time range. It was found in this study there was no segregation or strength reduction in vibrated samples. This result proved the concrete was far more sensitive to under-compaction, with over-compaction not being a practical concern. It was also determined that concrete compressive strength and vibration time had a basically logarithmic relationship and 30 s of continuous internal vibration provided the most efficient result of approximately 92% of maximum strength. The study recommends adjustment of standard concrete vibration practice to accommodate the more efficient 30 s duration. Alternatively, a 1.4x 'vibration factor' can be applied during design of compressive strength of concrete to accommodate the current 5–15 s vibration time window.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Innovative concrete reinforcement materials · Concrete and Cement Materials Research · Recycled Aggregate Concrete Performance

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. American Concrete Institute · 2005
2. American Concrete Institute · 2008
3. Neville · 2011
4. Concrete Vibration
5. Cement Concrete & Aggregates Australia, “Concrete Basics - A Guide To Concrete Practice”, Cement Concrete & Aggregates Australia, (2010)
6. Effect of degree of consolidation on some important properties of conrete
7. Effects of Vibration Time on Strength of Ordinary and High Performance Concrete
8. Influence of the concrete mixture compaction time on density and compressive strength of hardened concrete samples
9. Concrete Vibration - What's Adequate?
10. Interfacial transition zones in recycled aggregate concrete with different mixing approaches10.1016/j.conbuildmat.2012.06.022 ↗
11. The role and interaction of superplasticizer and emulsifier in fresh cement asphalt emulsion paste through rheology study10.1016/j.conbuildmat.2016.08.085 ↗
12. Development of high-performance self-compacting concrete applied as the filling layer of high-speed railway10.1061/(ASCE)MT.1943-5533.0002129 ↗
13. Standards Association of Australia · 2014
14. Standards Association of Australia · 2014
15. Standards Association of Australia · 2014
16. American Concrete Institute · 1991
17. American Concrete Institute · 2008
18. Standards Association of Australia · 2014
19. Cordell Costing Solutions · 2014
20. American Society for Testing and Materials · 2006 · 125