Effect of multiple chemical activators on mechanical property of high replacement high calcium fly ash blended system
Source abstract
Abstract
Abstract Although the alkali activation of high calcium fly ash has been well studied, there is limited research has been conducted about the activation with carbonates and aluminum sulfates in the high replacement high calcium fly ash blended system. In this study, the activation effect of four types of chemical activators (Li2CO3, Na2CO3, K2CO3 and Al2(SO4)3) on the mechanical property was researched, and the high replacement of high calcium fly ash was kept as 50%. The activation mechanisms were revealed by the analyses of the non-evaporated water content, the reaction degree of fly ash and the hydration products. It was found that the addition of Li2CO3 was more effective to enhance the compressive strength development and reduce the setting time of the blended mixture due to distinct acceleration of hydration of cement with more formation of C-S-H. Due to the effective promotion of hydration of cement and activation of pozzolanic reaction by the addition of Al2(SO4)3, the combination of 0.6% Li2CO3 and 0.6% Al2(SO4)3 was used to obtain the superior mechanical property, and the mechanism of which was also proposed that the existence of the LiAl2(OH)7·2(H2O) and Li2SO4·H2O might induce the precipitation of amorphous Li-containing C-S-H and that would act as the seeds for the nucleation of C-S-H, so that the compressive strength development would be faster. However, the above hypothesis requires further research to confirm it.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Recycling and utilization of industrial and municipal waste in materials production · Magnesium Oxide Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (67)
Show source-provided references
1. review on fly ash characteristics Towards promoting high volume utilization in developing sustainable concrete10.1016/j.jclepro.2017.01.114 ↗
2. Effect of fly ash on Portland cement systems: Part II. High-calcium fly ash10.1016/S0008-8846(00)00388-4 ↗
3. High-calcium fly ash as the fourth constituent in concrete: problems, solutions and perspectives10.1016/j.cemconcomp.2004.02.012 ↗
4. Concrete structure, properties, and materials
5. FT-IR and micro-Raman spectroscopic characterization of minerals in high-calcium coal ashes
6. Effect of content and particle size distribution of high-calcium fly ash on the rheological properties of cement pastes10.1016/S0008-8846(97)00073-2 ↗
7. The influence of high-calcium fly ash on the properties of fresh and hardened self-compacting concrete and high performance self-compacting concrete10.1016/j.jclepro.2014.02.058 ↗
8. The hydraulic activity of high calcium fly ASH10.1007/s10973-005-6970-7 ↗
9. Mechanical and durability properties of high volume fly ash (HVFA) concrete containing calcium carbonate (CaCO3) nanoparticles10.1016/j.conbuildmat.2014.07.099 ↗
10. The mechanical activation of fly ash10.1016/j.proeng.2013.09.016 ↗
11. Optimization of fineness to maximize the strength activity of high-calcium ground fly ash – Portland cement composites10.1016/j.conbuildmat.2008.08.024 ↗
12. Pozzolanic Index and lime requirement of low calcium fly ashes in high volume fly ash mortar10.1016/j.conbuildmat.2016.11.038 ↗
13. Activation of high volume fly ash pastes using chemical activators
14. Hydration kinetics of a low carbon cementitious material produced by physico-chemical activation of high calcium fly ash10.3151/jact.10.254 ↗
15. The effect of grinding process on mechanical properties and alkali–silica reaction resistance of fly ash incorporated cement mortars10.1016/j.powtec.2009.08.020 ↗
16. The mechanical activation of fly ash☆10.1016/j.proeng.2013.09.016 ↗
17. The effect of grinding on the physical properties of fly ashes and a Portland cement clinker10.1016/S0008-8846(97)00194-4 ↗
18. Influence of reactivity of fly ash on geopolymerisation
19. Influence of fly ash fineness on the chloride penetration of concrete10.1016/j.conbuildmat.2005.08.010 ↗
20. Influence of fly ash fineness on strength, drying shrinkage and sulfate resistance of blended cement mortar10.1016/j.cemconres.2003.11.021 ↗
21. Effect of fly ash fineness on microstructure of blended cement paste10.1016/j.conbuildmat.2005.12.024 ↗
22. Effect of free lime content on properties of cement–fly ash mixtures10.1016/j.conbuildmat.2012.09.035 ↗
23. Effect and limitation of free lime content in cement-fly ash mixtures10.1016/j.conbuildmat.2015.10.174 ↗
24. Size fraction characterization of highly-calcareous fly ash10.1016/j.fuproc.2010.06.002 ↗
25. Synthesis of high strength ambient cured geopolymer composite by using low calcium fly ash10.1016/j.conbuildmat.2016.08.097 ↗
26. Strength, permeability and micro-structural characteristics of low-calcium fly ash based geopolymers10.1016/j.conbuildmat.2017.03.031 ↗
27. The importance of the network-modifying element content in fly ash as a simple measure to predict its strength potential for alkali-activation10.1016/j.cemconcomp.2014.12.001 ↗
28. Alkali-activated complex binders from class C fly ash and Ca-containing admixtures10.1016/j.jhazmat.2009.08.110 ↗
29. Mechanical properties and microstructure of class C fly ash-based geopolymer paste and mortar10.3390/ma6041485 ↗
30. Investigations on mix design of tungsten mine waste geopolymeric binder10.1016/j.conbuildmat.2007.07.015 ↗
31. Microanalysis of calcium silicate hydrate gel formed within a geopolymeric binder10.1023/A:1025904905176 ↗
32. Factors affecting the strength of alkali-activated slag10.1016/0008-8846(94)90026-4 ↗
33. Workability and strength of coarse high calcium fly ash geopolymer10.1016/j.cemconcomp.2006.11.002 ↗
34. Pervious high-calcium fly ash geopolymer concrete10.1016/j.conbuildmat.2011.12.028 ↗
35. High calcium fly ash geopolymer mortar containing Portland cement for use as repair material10.1016/j.conbuildmat.2015.08.139 ↗
36. Durability study on high calcium fly ash based geopolymer concrete10.1155/2015/731056 ↗
37. Setting time, strength, and bond of high-calcium fly ash geopolymer concrete10.1061/(ASCE)MT.1943-5533.0001157 ↗
38. Assessment of phase formation in alkali activated low and high calcium fly ashes in building materials10.1016/j.conbuildmat.2009.11.007 ↗
39. Chemical research and climate change as drivers in the commercial adoption of alkali activated materials10.1007/s12649-010-9015-9 ↗
40. An environmental evaluation of geopolymer based concrete production: reviewing current research trends10.1016/j.jclepro.2011.03.012 ↗
41. Microstructural and morphological evolution of fly ash based geopolymers10.1016/j.conbuildmat.2016.02.106 ↗
42. Pozzolanic reaction in the presence of chemical activators: Part I. Reaction kinetics10.1016/S0008-8846(00)00214-3 ↗
43. Microstructural and strength improvements through the use of Na2CO3, in a cementless Ca(OH)2-activated Class F fly ash system10.1016/j.cemconres.2014.10.001 ↗
44. Alkali release characteristics of blended cements10.1016/j.cemconres.2006.02.015 ↗
45. Degree of hydration and gel/space ratio of high-volume fly ash/cement systems10.1016/S0008-8846(00)00213-1 ↗
46. Quantitative analysis of fly ash in hardened cement paste10.1016/j.conbuildmat.2017.07.106 ↗
47. Quantification of the degree of reaction of fly ash10.1016/j.cemconres.2010.07.004 ↗
48. I.C.f.D. Data (Ed), PDF-2 Database, 2000.
49. Effects of the physicochemical properties of fly ash on the compressive strength of high-volume fly ash mortar10.1016/j.conbuildmat.2016.08.148 ↗
50. Mechanical and microstructural characterization of alkali sulfate activated high volume fly ash binders10.1016/j.matdes.2017.03.021 ↗
51. Characterisation of reactive magnesia and sodium carbonate-activated fly ash/slag paste blends10.1016/j.conbuildmat.2015.06.015 ↗
52. Development of greener alkali-activated cement: utilization of sodium carbonate for activating slag and fly ash mixtures10.1016/j.jclepro.2015.12.010 ↗
53. Utilization of circulating fluidized bed combustion ash in producing controlled low-strength materials with cement or sodium carbonate as activator
54. Strength and microstructural characteristics of chemically activated fly ash–cement systems10.1016/S0008-8846(02)00973-0 ↗
55. Activation of fly ash/cement systems using calcium sulfate anhydrite (CaSO4)10.1016/S0008-8846(01)00478-1 ↗
56. Shi · 2006
57. Characterization of aged slag concretes
58. Evaluation of activated high volume fly ash systems using Na2SO4, lime and quicklime in mortars with high loss on ignition fly ashes10.1016/j.conbuildmat.2016.10.076 ↗
59. Growth of negative solubility lithium sulfate monohydrate crystal by slow evaporation and Sankaranarayanan-Ramasamy method10.1016/j.jcrysgro.2012.01.036 ↗
60. LiNO3 addition to prevent hydrogen gas generation from cement-solidified aluminum wastes10.1080/18811248.1995.9731793 ↗
61. Physico-chemical mechanisms involved in the acceleration of the hydration of calcium sulfoaluminate cement by lithium ions10.1016/j.cemconres.2017.03.004 ↗
62. Lithium salts as set accelerators for high alumina cement10.1016/0008-8846(93)90149-4 ↗
63. The chemistry of hydration of high alumina cement in the presence of accelerating and retarding admixtures10.1016/0008-8846(84)90082-6 ↗
64. Characterising Curing Cement Slurries by Electrical Conductivity10.2118/74694-PA ↗
65. A.M. Neville, Properties of Concrete. Properties of Concrete, 1996, 36(4):838-844.
66. Influence of LiAl-layered double hydroxides with 3D micro-nano structures on the properties of calcium sulphoaluminate cement clinker10.1016/j.cemconcomp.2016.03.009 ↗
67. Nan · 2000