Effect of amorphous metallic fiber on mechanical properties of high-strength concrete exposed to high-temperature
Source abstract
Abstract
Abstract This study experimentally examined the effect of amorphous metallic fiber on the mechanical properties of heated high-strength concrete with compressive strengths of 100 and 120 MPa. The mixing ratios of amorphous metallic fiber were 0.3 and 0.5 vol%. Polypropylene fiber was added at the ratios of 0.15 and 0.25 vol% according to the compressive strength of concrete. Specimens were prepared at six levels depending on the compressive strength of concrete and the mixing condition of the fiber. Specimens were heated up to the target temperatures of 100, 200, 300, 500, and 700 °C at the rate of 1 °C /min, and the respective compressive strength and elastic modulus were measured after 24 h cooling periods. The thermal expansion strain was experimentally measured while the specimen was heated (maximum temperature of 700 °C). The addition of amorphous metallic fiber can improve the degradation of compressive strength and elastic modulus of high-strength concrete (which was heated at temperatures above 300 °C). This effect could be confirmed by measurements of the thermal expansion and the peak strains. The addition of amorphous metallic fiber was effective in suppressing cracks that occurred owing to the expansion of aggregate and the shrinkage of cement paste.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fire effects on concrete materials · Concrete Properties and Behavior · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Fire tests and calculation methods for circular concrete columns10.1023/A:1021783311892 ↗
2. Spalling in high strength concrete exposed to fire: concerns, causes, critical parameters and cures
3. Evaluation of the mechanical properties of 200 MPa ultra-high-strength concrete at elevated temperatures and residual strength of column10.1016/j.conbuildmat.2015.03.074 ↗
4. Spalling of self compacting concrete
5. ISO 834 · 1999
6. KS F 2257–1 · 1999
7. ASTM E119 · 2002
8. BSI · 1987
9. JIS A 1304: Method of fire resistance test for structural parts of buildings, 1994.
10. How do polypropylene fibers improve the spalling behavior of in-situ concrete?10.1016/j.cemconres.2005.12.018 ↗
11. On the mechanism of polypropylene fibres in preventing fire spalling in self-compacting and high-performance cement paste10.1016/j.cemconres.2007.11.010 ↗
12. Optimization of the type and amount of polypropylene fibres for preventing the spalling of lightweight concrete subjected to hydrocarbon fire10.1016/S0958-9465(03)00085-4 ↗
13. Compressive strength of concrete at temperatures to 1600F
14. The effect of temperature on the compressive strength of concrete10.1680/macr.1956.8.23.85 ↗
15. Concrete at high temperatures—a general review10.1016/0379-7112(88)90033-1 ↗
16. Comparison of the strength and durability performance of normal-and high-strength pozzolanic concretes at elevated temperatures10.1016/S0008-8846(01)00580-4 ↗
17. Williamson · 1987
18. Elevated temperature effects on HSC residual strength
19. Fire endurance of high-strength concrete slabs
20. L.T. Phan, N.J. Carino. Mechanical properties of high-strength concrete at elevated temperatures (No. NIST Interagency/Internal Report (NISTIR–6726), 2001.10.6028/NIST.IR.6726 ↗
21. Effects of test conditions and mixture proportions on behavior of high-strength concrete exposed to high temperatures
22. Effects of elevated temperature exposure on heating characteristics, spalling, and residual properties of high performance concrete10.1007/BF02481556 ↗
23. High-strength concrete at high temperature-an overview
24. Comparison of compressive and splitting tensile strength of high-strength concrete with and without polypropylene fibers heated to high temperatures10.1016/j.firesaf.2009.07.001 ↗
25. Residual strength of hybrid-fiber-reinforced high-strength concrete after exposure to high temperatures10.1016/j.cemconres.2003.11.010 ↗
26. Compressive behaviour of hybrid fiber-reinforced reactive powder concrete after high temperature10.1016/j.matdes.2012.05.026 ↗
27. Shrinkage and corrosion resistance of amorphous metallic-fiber-reinforced cement composites10.1016/j.compstruct.2013.08.010 ↗
28. Benefits of using amorphous metallic fibers in concrete pavement for long-term performance10.1016/j.acme.2017.02.010 ↗
29. Bonding properties of amorphous micro-steel fibre-reinforced cementitious composites10.1016/j.compstruct.2013.02.015 ↗
30. Performance of shotcrete containing amorphous fibers for tunnel applications10.1016/j.tust.2017.01.012 ↗
31. Seismic behaviors of thin slender structural walls reinforced with amorphous metallic fibers10.1016/j.engstruct.2017.09.004 ↗
32. Flexural behaviour of amorphous micro-steel fibre-reinforced cement composites10.1016/j.compstruct.2011.11.031 ↗
33. Size effect in normal-and high-strength amorphous metallic and steel fiber reinforced concrete beams10.1016/j.conbuildmat.2016.06.040 ↗
34. RILEM Recommendations: part 4: tensile strength for service and accident conditions
35. ASTM C 39/39M · 2014 · 1
36. EN 1992–1–2:2004: Eurocode 2: Design of concrete structures – Part 1–2: General rules – Structural fire design.
37. Phan · 1996
38. Residual stress–strain relationship for concrete after exposure to high temperatures10.1016/j.cemconres.2006.05.029 ↗
39. Some effects of thermal volume changes on the properties and behaviour of concrete
40. Post-fire residual mechanical properties of concrete made with recycled concrete coarse aggregates10.1016/j.cemconres.2011.02.002 ↗
41. Influence of steel and/or polypropylene fibres on the behaviour of concrete at high temperature: spalling, transfer and mechanical properties10.1016/j.conbuildmat.2016.11.120 ↗
42. A new quantitative method of assessing fire damage to concrete structures10.1680/macr.1995.47.172.271 ↗
43. Influence of elevated temperatures on the mechanical properties and microstructure of self consolidating lightweight aggregate concrete10.1016/j.conbuildmat.2012.02.088 ↗
44. Effect of coarse aggregate type and loading level on the high temperature properties of concrete10.1016/j.conbuildmat.2014.12.096 ↗
45. Effect of moisture migration and water vapor pressure build-up with the heating rate on concrete spalling type10.1016/j.cemconres.2018.10.021 ↗