journal article·2020-04

Effect of high metakaolin content on compressive and shear-bond strengths of oil well cement at 80 °C

Petro Ezekiel Mabeyo, Yusra Salmin Ibrahim, Jun Gu

Publisher page

Abstract

Abstract This paper reports the effect of high metakaolin content on compressive and shear bond strengths of oil well cement cured at 80 °C. X-ray diffraction (XRD), and thermo gravimetric-differential scanning calorimetry (TG-DSC) used to study cement phases. Both compressive and shear bond strengths increased with hydration age. The binary system with 20% metakaolin displayed better compressive strength relative to the neat oil well cement samples. It increased by 17 and 20% at 3 and 28 days of hydration, respectively. The shear bond strength equally increased by 145 and 56% at 3 and 28 days, respectively. The results of this study, therefore, point to a feasible cement system for the long life of the oil and gas wells.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Concrete Corrosion and Durability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (62)

Show source-provided references
1. Improved zonal isolation in open hole applications
2. Shear bond strength of oil well cement in carbonic acid environment10.1016/j.jcou.2018.07.001 ↗
3. J. Plank, C. Tiemeyer, D. Buelichen, A study of cement/mudcake/formation interfaces and their impact on the sealing quality of oilwell cement, Soc. Pet. Eng. - IADC/SPE Asia Pacific Drill. Technol. Conf. 2014 Driv. Sustain. Growth Through Technol. Innov., 2014. 1–8.10.2118/170452-MS ↗
4. Characterization, morphology and shear bond strength analysis of geopolymers: Implications for oil and gas well cementing applications10.1016/j.jngse.2016.12.042 ↗
5. Effect of casing coating materials on shear-bond strength
6. Conversion of drilling fluids to cements with blast furnace slag: performance properties and applications for well cementing
7. Experiments on integrated solidification and cementation of the cement-formation interface using the Mud Cake to Agglomerated Cake (MTA) method10.1016/S1876-3804(10)60028-6 ↗
8. Solidifying mud cake to improve cementing quality of shale gas well: a case study10.2174/1876973X01508010149 ↗
9. Influence of mud cake solidification agents on thickening time of oil well cement and its solution10.1016/j.conbuildmat.2017.07.128 ↗
10. Comparative study on cementation of cement-mudcake interface with and without mud-cake-solidification-agents application in oil & gas wells10.1016/j.petrol.2016.05.014 ↗
11. Cement slurries of oil wells under high temperature and pressure: the effects of the use of ceramic waste and silica flour10.5419/bjpg2012-0009 ↗
12. Improvement of aluminium powder application measure based on influence of gas hole on strength properties of oil well cement10.1016/j.conbuildmat.2013.05.057 ↗
13. Cement sheath integrity of shale gas wells: a case study from the Sichuan Basin10.1016/j.ngib.2017.11.004 ↗
14. Supplementary cementitious materials10.1016/j.cemconres.2010.12.001 ↗
15. A. Shahriar, M.L. Nehdi, Advances in Civil Engineering Materials Effect of Supplementary Cementitious Materials on Rheology of Oil Well Cement Slurries Effect of Supplementary Cementitious Materials on Rheology of Oil Well Cement Slurries, 3, 2014. doi: 10.1520/ACEM20120027.10.1520/ACEM20120027 ↗
16. Physico-chemical characteristics of blended cement pastes containing electric arc furnace slag with and without silica fume10.1016/j.hbrcj.2014.07.002 ↗
17. Physicochemical characteristics of cementitious building materials derived from industrial solid wastes10.1016/j.conbuildmat.2016.09.112 ↗
18. Hydration characteristics and compressive strength of hardened cement pastes containing nano-metakaolin10.1016/j.hbrcj.2014.11.008 ↗
19. Hydrothermal characteristics of high-slag cement pastes made with and without silica sand10.1680/adcr.2012.24.1.23 ↗
20. The effect of dehydroxylation/amorphization degree on pozzolanic activity of kaolinite10.1016/S0008-8846(02)00975-4 ↗
21. Influence of the calcination temperature of kaolin on the mechanical properties of mortars and concretes containing metakaolin10.1180/claymin.2008.043.2.02 ↗
22. Evaluation of metakaolin for use in concrete
23. Pozzolanic and hydraulic activity of nano-metakaolin10.1016/j.hbrcj.2013.09.006 ↗
24. Hydration of synthetized clinker phases C3S and C3A with metakaolin in isothermal conditions10.4028/www.scientific.net/AMR.1124.23 ↗
25. Ettringite formation and the performance of concrete
26. Investigation of C-S-H in ternary cement pastes containing nanosilica and highly-reactive supplementary cementitious materials (SCMs): microstructure and strength10.1016/j.conbuildmat.2018.10.235 ↗
27. Use of metakaolin as pozzolanic material and partial replacement with cement in concrete (M30)10.51983/arme-2016.5.1.2411 ↗
28. Chemical and mechanical characterization of ternary cement pastes containing metakaolin and nanosilica10.1016/j.conbuildmat.2017.10.123 ↗
29. Hydration and properties of nano-TiO2 blended cement composites10.1016/j.cemconcomp.2012.02.009 ↗
30. Influence of nano-TiO2 on physical and hydration characteristics of fly ash–cement systems10.1016/j.conbuildmat.2016.02.087 ↗
31. Durability of metakaolin concrete to sulfate attack10.1016/j.cemconres.2006.03.026 ↗
32. Influence of metakaolin on resistivity of cement mortar to magnesium chloride solution10.1061/(ASCE)MT.1943-5533.0000294 ↗
33. Cementing solutions for corrosive well environments10.2118/132228-PA ↗
34. Properties of oil well cement with high dosage of metakaolin10.1016/j.conbuildmat.2016.02.173 ↗
35. H. Becker, G. Peterson, Bond of Cement Composition for Cementing Wells, German, 1963
36. A study of cement-pipe bonding10.2118/764-PA ↗
37. Control and prevention of inter-zonal flow10.2118/903-PA ↗
38. Influence of Portland cement composition on early age reactions with metakaolin10.1016/j.cemconres.2007.07.002 ↗
39. Effect of metakaolin content on the properties of high strength concrete10.1007/s40069-013-0045-0 ↗
40. Effect of metakaolin on strength and efflorescence quantity of cement-based composites10.1155/2013/606524 ↗
41. Influence of metakaolin as supplementary cementing material on strength and durability of concretes10.1016/j.conbuildmat.2011.12.050 ↗
42. Hydration and characteristics of metakaolin pozzolanic cement pastes10.1016/j.hbrcj.2015.05.005 ↗
43. Behavior of blended cement mortars containing nano-metakaolin at elevated temperatures10.1016/j.conbuildmat.2012.04.099 ↗
44. Effect of interface defects on shear strength and fluid channeling at cement-interlayer interface10.1016/j.petrol.2012.11.021 ↗
45. American Petroleum Institute, API Specification 10A – Specification for Cements and Materials for Well Cementing, 2002.
46. American Petroleum Institute, Recommended Practice for Testing Well Cements, API Recommended Practice 10B-2 Second Edition, APRIL 2013 (R2019), 2013.
47. The cement-to-formation interface in zonal isolation10.2118/88016-PA ↗
48. Influence of aluminates on the hydration kinetics of tricalcium silicate10.1016/j.cemconres.2017.06.006 ↗
49. Effect of particle size distribution of metakaolin on hydration kinetics of tricalcium silicate10.1111/jace.16467 ↗
50. Influence of metakaolin on the properties of mortar and concrete: a review10.1016/j.clay.2008.11.007 ↗
51. The filler effect: the influence of filler content and type on the hydration rate of tricalcium silicate10.1111/jace.14859 ↗
52. Relative strength, pozzolanic activity and cement hydration in superplasticised metakaolin concrete10.1016/0008-8846(96)00148-2 ↗
53. Analysis of hydration and optimal strength combinations of cement-limestone-metakaolin ternary composite
54. The effect of temperature on the hydration rate and stability of the hydration phases of metakaolin-lime-water systems10.1016/S0008-8846(01)00642-1 ↗
55. The effect of high curing temperature on the reaction kinetics in MK/lime and MK-blended cement matrices at 60 °C10.1016/S0008-8846(02)01040-2 ↗
56. Analysis of engineered cement paste using silica nanoparticles and metakaolin using 29Si NMR, water adsorption and synchrotron X-ray Diffraction10.1016/j.conbuildmat.2018.05.272 ↗
57. Steel/mortar interfaces: microstructural features and mode of failure10.1016/0008-8846(79)90026-7 ↗
58. Cement shrinkage and elasticity: a new approach for a good zonal isolation10.2118/13176-MS ↗
59. Long-term effects of high temperature on strength retrogression of cements
60. Class H cement hydration at 180 °C and high pressure in the presence of added silica10.1016/j.cemconres.2007.12.004 ↗
61. Effect of hydrothermal curing on early hydration of G-Oil well cement10.1007/s10973-013-3511-7 ↗
62. Thermal resistance, microstructure and mechanical properties of type I Portland cement pastes containing low-cost nanoparticles10.1007/s10973-017-6629-1 ↗