Development of an energy-saving technology for sintering of bricks from high-siliceous clay by the plastic molding method
Source abstract
Abstract
Abstract In the work, the possibility of using the method of plastic molding of blanks and realizing an energy-saving sintering of building bricks from high-siliceous clays have been considered. It has been established that the addition of sand containing a small amount of montmorillonite to such clays makes it possible to perform of plastic molding, and the introduction of low-melting glass additives allows sintering of bricks at 800 °C for 8 h. The data of X-ray diffraction analysis and IR spectroscopy have shown that the synthesized material contains quartz, feldspar, and glass phase, i.e., glass ceramics has been formed. The basis of low-temperature sintering is the formation of a low-temperature eutectic between the molten glass, feldspars, and silica. It has been established that the density, porosity, water absorption, and mechanical properties of ceramics depend on the ratio of the components in the initial mixtures. The developed technology has made it possible to synthesize high-quality building bricks from high-siliceous clays under low-temperature sintering conditions.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Recycling and utilization of industrial and municipal waste in materials production · Pigment Synthesis and Properties · Building materials and conservation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Von H. Salmang, Die physikalischen und chemischen Grundlagen der Keramik, 3. verb. Aufl. Berlin u. a., 1956.
2. Budnikov · 1955
3. M. Fritz, Sustainable Clay Brick Production, The 2005 World Sustainable Building Conference, Tokyo, 27-29 September 2005 (SB05Tokyo): 40875-4092, 2004: https://www.irbnet.de/daten/iconda/CIB4274.pdf.
4. Energy intensity and economic performance in small scale bricks and foundry clusters in India: does energy intensity matter?10.1016/j.enpol.2004.06.016 ↗
5. A.I. Ivanov, Wall ceramic materials of compression molding from dispersed high-siliceous rocks, Dis. Ph.D., Novokuznetsk, Russia, 2018.
6. Effect of the change of firing temperature on microstructure and physical properties of clay bricks from Beruas (Malaysia)10.2298/SOS1002245J ↗
7. A.Yu. Stolboushkin, A.I. Ivanov, O.A. Fomina, A.S. Fomin, G.I. Storozhenko, Principles of optimal structure formation of ceramic semi-dry pressed brick, Advanced Materials, Mechanical and Structural Engineering – Hong, Seo & Moon (Eds.) Taylor & Francis Group, London, 2016.
8. Clays and bodies for ceramic tiles: reappraisal and technological classification10.1016/j.clay.2014.01.013 ↗
9. Influence of sintering temperatures on physico-mechanical properties and microstructure of refractory fireclay bricks
10. Groover · 2010
11. Sintering and mechanical properties of porcelains prepared from algerian raw materials10.1590/S0366-69132011000400013 ↗
12. On the glassy phase in tri-axial porcelain bodies
13. Mullite development on firing in porcelain stoneware bodies10.1016/j.jeurceramsoc.2010.01.002 ↗
14. Characterisation of porcelain compositions using two china clays from Cameroon10.1016/j.ceramint.2006.01.025 ↗
15. Traditional and glass powder porcelain: technical and microstructure analysis10.1016/j.jeurceramsoc.2003.08.003 ↗
16. J. Ajala Amkpa, A. Edogbo Aye, F. Enefola Omagu, Mechanical and physicochemical evaluation of alkaleri fireclay for refractory application, Traektoriâ Nauki = Path of Science, 3(4) (2017) 6.15-6.20. doi: 10.22178/pos.21-7.10.22178/pos.21-7 ↗
17. Studies on the Chemical and Physical Characteristics of Selected Clay Samples
18. Impact of sintering temperatures on microstructure, porosity and mechanical strength of refractory brick10.4028/www.scientific.net/MSF.888.66 ↗
19. Composition, firing behavior and ceramic properties of the Sejnène clays (Northwest Tunisia)10.1016/j.clay.2015.07.025 ↗
20. Study of the Refractory Properties of Selected Clay deposit in Chavakali, Kenya
21. Formation of porous ceramics using cullet and biological waste of water purification10.2298/SOS1101081V ↗
22. M. Vlasova, A. Parra Parra, P.A. Márquez Aguilar, A. Trujillo Estrada, V. González Molina, M. Kakazey, T. Tomila, V. Gómez-Vidales, Closed cycle of recycling of waste activated sludge, Waste Manage. 71(2018) 320-333. doi: 10.1016/j.wasman.2017.10.051.10.1016/j.wasman.2017.10.051 ↗
23. Purification of sewage by porous materials obtained with using different types of waste
24. Development of an energy- and water-saving manufacturing technology of brick products10.2298/SOS1803275V ↗
25. Manufacturing of bricks in the past, in the present and in the future: a state of the art review
26. E.J. Badillo, A.R. Rodrigues, Mecánica de Suelos, v.1. Fundamentos de la Mecánica de Suelos, LIMUSA, México, 2005.
27. M. Mendoza, M. Orosco, Técnicas Alternativas para la determinación del Límite Líquido de Suelos, Ser. Instituto de Ingeniería de la UNAM, 2000.
28. ASTM C373-88. Standard test method for water absorption, bulk density, apparent density and apparent specific gravity of fired whitewares products. West Conshohocken, PA: ASTM International; 2002.
29. ASTM C-20, Standard Test Methods for Apparent Porosity, Water Absorption, Apparent Specific Gravity, and Bulk Density of Burned Refractory Brick and Shapes by Boling Water, Annual Book of American Society for Testing of Material (ASTM), U.S.A., 15, 2007.
30. ASTM C326-82. Standard test method for drying and firing shrinkage of ceramic whitewares clays. West Conshohocken, PA: ASTM International; 2002.
31. ASTM C773-88. Standard test method for compressive (crushing) strength of fired whitewares materials. West Conshohocken, PA: ASTM International; 2002.
32. ASTM C1161-02c(2008)e1, Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature, ASTM International, West Conshohocken, PA.
33. Bates · 1960
34. Effect of bentonite addition on some properties of porcelain
35. Moore · 1997
36. Low temperature synthesis of porous ceramics10.2298/SOS0701039M ↗
37. Plyusnina · 1957
38. Standard specification for building brick. Norma Mexicana NMX-C404-ONNCCE-2012.
39. A. Cuevas, F. Godínez end R. Barragán, Estudio de tres zonas productoras de tabiques de arcilla en la región centro del estado de Guerrero, in: Ciencias de la Ingeniería y Tecnología. Handbook, M. Ramos, V. Aguilera (eds.), ECOFRAN, Valle de Santiago, Guanajuato, 2013.
40. J.C. Adame, Comparacion de la calidad de ladrillos de arcilla y el tabicón de concreto, que utiliza para la mamposteria en el Municipio de Chilpancingo, Guerrero, 2008.
41. Effect of the sintering technology on the properties of fired brick from quartz sands
42. Mineralogical and physical behaviour of solid bricks with additives10.1016/j.conbuildmat.2004.04.035 ↗
43. G. Cultrone, C. Rodrıguez Navarro, E. Sebastian, O. Cazalla, M.J. De la Torre, Carbonate and silicate phase reactions during ceramic firing, Eur. J. Mineral. 13 (2001) 621–34. doi: 10.1127/0935-1221/2001/0013-0621.10.1127/0935-1221/2001/0013-0621 ↗
44. Fired clay bricks manufactured by adding wastes as sustainable construction material – a review10.1016/j.conbuildmat.2014.03.045 ↗
45. Oily diatomite and galvanic wastes as raw materials for red ceramics fabrication10.1016/j.conbuildmat.2012.11.041 ↗
46. R.G. Eromasov, Composite ceramic materials based on coarse-grained technogenic filler, Thesis Ph.D, Krasnoyarsk, Russia, 2015.
47. A.A. Shakir, S. Naganathan, K.N. Bin Mustapha, Development of Bricks from Waste Material: A Review Paper, Australian J. Basic Appl. Sci., 7(8) (2013), 812-818.
48. Properties of bricks made using fly ash, quarry dust and billet scale10.1016/j.conbuildmat.2012.11.077 ↗
49. Ailer · 1979