journal article·2016-07

Effect of up to 12% substitution of clinker with limestone on commercial grade concrete containing supplementary cementitious materials

James Mohammadi, Warren South

Publisher page

Abstract

Abstract This paper presents the results of a test program conducted to determine the effect of up to 12% limestone addition in cement on properties of concrete for durable applications. Cement samples with 5%, 7.5%, 10% and 12% limestone content were used and concretes were made with different binder combinations incorporating one or more of fly ash, slag and amorphous silica, applicable for durable applications. Fresh concrete properties including slump, air content, bleed and setting time were investigated and no adverse effects were found. Hardened properties examined included compressive strength, drying shrinkage, chloride resistance and volume of permeable voids. The results revealed a minor effect on concrete strength, though performance depended on the binder composition. Drying shrinkage of concrete was found to be similar for all concretes investigated. For mixes containing slag, chloride resistance was improved with increasing limestone content.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Concrete Properties and Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. Cement Industry Federation (CIF), Statistics 2013. Sydney, Australia, 2013.
2. AS 3972, General purpose and blended cements, Australian Standard, 2010, 1–29.
3. Influence of various amounts of limestone powder on performance of Portland limestone cement concretes10.1016/j.cemconcomp.2009.08.003 ↗
4. Properties and behavior of limestone cement concrete and mortar10.1016/S0008-8846(00)00372-0 ↗
5. Adding limestone fines as cement paste replacement to reduce water permeability and sorptivity of concrete10.1016/j.conbuildmat.2014.01.066 ↗
6. AUSTRALASIAN (IRON & STEEL) SLAG ASSOCIATION. Blast Furnace Slag – REFERENCE DATA SHEET 1. Suite 2, Level 1, 336 Keira Street, Wollongong NSW, 2011.
7. Australian Experience With Fly Ash in Concrete: Applications and Opportunities
8. Development of an eco-friendly Ultra-High Performance Concrete (UHPC) with efficient cement and mineral admixtures uses10.1016/j.cemconcomp.2014.09.024 ↗
9. The permeability of Portland limestone cement concrete10.1016/S0008-8846(03)00092-9 ↗
10. Building Research Establishment (BRE). Performance of Limestone-Filled Cements: Report of Joint BRE/BCA/Cement Industry Working Party, 28 November 1989, 1993.
11. Strength development of ternary blended cement with limestone filler and blast-furnace slag10.1016/S0958-9465(01)00056-7 ↗
12. Investigation of durability of CEM II B-M mortars and concrete with limestone powder, calcite powder and fly ash10.1016/j.conbuildmat.2014.06.078 ↗
13. Portland-limestone cements. Their properties and hydration compared to those of other composite cements10.1016/j.cemconcomp.2004.02.006 ↗
14. Fresh and hardened characteristics of self compacting concretes made with combined use of marble powder, limestone filler, and fly ash10.1016/j.conbuildmat.2012.07.092 ↗
15. Effect of limestone addition on early-age properties of ultra high-performance concrete
16. Sulfate resistance of limestone cement concrete exposed to combined chloride and sulfate environment at low temperature10.1016/j.cemconcomp.2012.05.006 ↗
17. Thaumasite form of sulfate attack in limestone cement concrete: The effect of cement composition, sand type and exposure temperature10.1016/j.conbuildmat.2012.06.048 ↗
18. Potential use of binary and composite limestone cements in concrete production10.1016/j.conbuildmat.2013.12.012 ↗
19. Viscosity and water demand of limestone- and fly ash-blended cement pastes in the presence of superplasticisers10.1016/j.conbuildmat.2013.07.008 ↗
20. Influence of initial curing on the properties of concrete containing limestone blended cement10.1016/S0008-8846(00)00217-9 ↗
21. Thomas · 2010
22. Thaumasite-ettringite solid solutions in degraded mortars10.1016/j.cemconres.2003.09.016 ↗
23. Long term behavior of Portland limestone cement mortars exposed to magnesium sulfate attack10.1016/j.cemconcomp.2009.06.003 ↗
24. Thaumasite formed by sulfate attack on mortar with limestone filler10.1016/S0958-9465(03)00120-3 ↗
25. Thaumasite formation in limestone filler cements exposed to sodium sulphate solution at 20°C10.1016/j.cemconcomp.2003.10.003 ↗
26. Minimum SCM requirements in mixtures containing limestone cement to control thaumasite sulfate attack10.1016/j.conbuildmat.2015.02.074 ↗
27. R.D. Hooton, M. Nokken, M.D.A. Thomas, Portland-Limestone Cement, State-of-the-Art Report and Gap Analysis for CSA A 3000, Toronto, 2007.
28. Tennis · 2011
29. Hawkins · 2003
30. Limestone fillers conserve cement part 2: durability issues and the effects of limestone fineness on mixtures
31. The influence of the higher limestone content of General Purpose cement according to high-strength concrete test results and construction field data
32. Decision-making on increasing limestone content of general purpose cement10.3151/jact.13.528 ↗
33. Influence of limestone filler and viscosity-modifying admixture on the porous structure of self-compacting concrete10.1016/j.conbuildmat.2011.07.029 ↗
34. R. Hooton, MD. Thomas, Portland-limestone Cements for Use in Concrete CSA A23.1-09 Ballot (Changes to Section 4.2.1 and Table 6), 2009.
35. The effects of grinding on the properties of Portland-limestone cement10.1016/j.conbuildmat.2013.07.053 ↗
36. Beneficial use of limestone filler with calcium sulphoaluminate cement10.1016/j.conbuildmat.2011.06.065 ↗
37. Hydration products of C3A, C3S and Portland cement in the presence of CaCO310.1016/S0008-8846(00)00292-1 ↗
38. Mechanical behaviour of various mortars made by combined fly ash and limestone in Moroccan Portland cement10.1016/S0008-8846(02)00834-7 ↗
39. Limestone as a retarder and filler in limestone blended cement
40. Influence of limestone content, gypsum content and fineness on early age properties of Portland limestone cement produced by inter-grinding10.1016/j.cemconcomp.2010.10.001 ↗
41. Hooton · 1990
42. A study on the parameters affecting the properties limestone cements of Portland10.1016/S0958-9465(98)00031-6 ↗
43. A discussion on the autogenous shrinkage interpretation from the experimental shrinkage measurement based on the australian testing procedure AS1012.13
44. Adding limestone fines as cement paste replacement to reduce shrinkage of concrete10.1680/macr.13.00028 ↗
45. Utilisation of limestone powder in self-levelling binders10.1016/j.resconrec.2006.12.004 ↗
46. Evaluation of Portland limestone cements for use in concrete construction10.1617/s11527-006-9143-7 ↗
47. Preliminary comments on shrinkage and shrinkage cracking behavior of cement systems that contain limestone
48. Early-age deformation and autogenous cracking risk of slag–limestone filler-cement blended binders10.1016/j.conbuildmat.2014.01.037 ↗
49. Benn · 2012 · 3972