Development of new pH-adjusted fluorogypsum-cement-fly ash blends: Preliminary investigation of strength and durability properties
Source abstract
Abstract
Abstract This paper develops a new low-cost construction material made of pH-adjusted fluorogypsum, class C fly ash, and type II Portland cement. The proposed fluorogypsum-based blend is durable in water and has a lower weight and lower cost than ordinary concrete. A preliminary investigation of strength and durability properties of this new construction material is also presented. A series of compressive strength tests and volumetric expansion measurements were conducted on specimens after 28 days of curing. The experimental results were used to develop response surface models. These models can be used to predict accurately compressive strength and volumetric expansion as functions of the relative content, in dry weight, of different components. The response surface models were employed to determine ranges of dry components of the system with sufficient strength and limited volumetric expansion. A composition with 62% pH-adjusted fluorogypsum, 35% fly ash, and 3% Portland cement was selected based on strength and volumetric expansion properties to conduct additional experimental studies to quantify its modulus of elasticity, Poisson’s ratio, setting times, density, void contents, and curing time effects on strength and volumetric expansion. The investigation results suggest that the proposed fluorogypsum-based blend is a promising low-cost concrete-like material for use in outdoor and underwater construction applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Materials Engineering and Processing
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. UNEP · 2005
2. Halstead · 1979
3. Uses of waste materials and by-products in construction. Part I10.1016/0304-3967(80)90028-1 ↗
4. Uses of waste materials and by-products in construction. Part II10.1016/0304-3967(80)90002-5 ↗
5. ACAA., Beneficial use of coal combustion products, American Coal Ash Association, Farmington Hills, MI, USA. /, 2014 (accessed on Nov. 20, 2016).
6. Carbon dioxide emissions from the global cement industry10.1146/annurev.energy.26.1.303 ↗
7. Integrating waste and renewable energy to reduce the carbon footprint of locally integrated energy sectors10.1016/j.energy.2008.03.008 ↗
8. Sajwan · 2006
9. Environmental characteristics of by-product gypsum
10. W.H. Chesner, R.J. Collins, M.H. MacKay, User Guidelines for Waste and By-Product Materials in Pavement Construction, FHWA-RD-97-148, Rept. No. 480017, Turner-Fairbank Highway Research Center, McLean, VA, USA, 1998.
11. USGS, Mineral Commodity Summary. Fluorspar, US Geological Survey, Reston, VA, USA. /, 2002 (accessed on Oct. 16, 2016).
12. Aigueperse · 2000
13. Lind · 1999
14. R.H. Brink, Use of waste sulfate on transpo’72 parking lot. Proc., Third International Ash Utilization Symposium. Sponsored by National Coal Association, Edison Electric Institute, American Public Power Association, National Ash Association, and Bureau of Mines, Pittsburgh, PA, USA, 1973.
15. Construction and performance of experimental base course test sections built with waste sulfate, lime, and fly ash
16. Z. Zhang, M. Tao, Stability of Calcium Sulfate Base Course in a Wet Environment, FHWA/LA.06/419, Louisiana Transportation Research Center, Baton Rouge, LA, USA, 2006.
17. Activation of fluorogypsum for building materials
18. Water and solvent effects on the strength of set plaster10.1016/0148-9062(94)90153-8 ↗
19. Use of slurry fluorogypsum (FG) with controlled pH-adjustment in FG-based blends10.1016/j.conbuildmat.2017.12.099 ↗
20. C.D. Lofton, M. Barbato, Y. Bigdeli, J. Jung, J. Jang, K.A. Rusch, M.T. Gutierrez-Wing, Estimating sulfate effective diffusion coefficients of stabilized fluorogypsum for aquatic applications. J. Environ. Eng., ASCE, 2018 (In press), DOI: 10.1061/(ASCE)EE.1943-7870.0001419.10.1061/(ASCE)EE.1943-7870.0001419 ↗
21. Nawy · 2000
22. K.A. Rusch, R.K. Seals, T. Guo, Development of Economically Stabilized Phosphogypsum Composites for Saltwater Application. FIPR Project No. 99-01-162R, Louisiana State University, Baton Rouge, LA, USA, 2001.
23. K.A. Rusch, R.K. Seals, T. Guo, Development of Economically Stabilized Phosphogypsum Composites for Saltwater Application, FIPR Project No. 99-01-162S, Louisiana State University, Baton Rouge, LA, USA, 2005.
24. Y. Bigdeli, M. Barbato, Use of a low-cost concrete-like fluorogypsum-based blend for applications in underwater and coastal protection structures. Proceedings, Oceans 17, Anchorage, AL, USA, 18-21 September, 2017.
25. Mechanism of expansion associated with ettringite formation10.1016/0008-8846(73)90056-2 ↗
26. Expansive admixtures (mainly ettringite)10.1016/S0958-9465(97)00064-4 ↗
27. Young · 1993
28. ASTM D2216-10 Standard test methods for laboratory determination of water (moisture) content of soil and rock by mass. ASTM International, West Conshohocken, PA, USA, 2010. DOI: 10.1520/D2216-10.10.1520/D2216-10 ↗
29. ASTM C192/C192M-16a Standard practice for making and curing concrete test specimens in the laboratory. ASTM International, West Conshohocken, PA, USA, 2016. DOI: 10.1520/C0192-C0192M-16A.
30. Cornell · 2002
31. ASTM D6913-04 (Reapproved 2009), Standard test method for particle-size distribution (gradation) of soils using sieve analysis ASTM International, West Conshohocken, PA, USA, 2009. 10.1520/D6913-04R09.
32. ASTM D4972-13 Standard test method for pH of soils. ASTM International, West Conshohocken, PA, USA, 2013. DOI: 10.1520/D4972-13.10.1520/D4972-13 ↗
33. ASTM C39/C39M-16b Standard test method for compressive strength of cylindrical concrete specimens. ASTM International, West Conshohocken, PA, USA, 2016. DOI: 10.1520/C0039-C0039M-16B.
34. ASTM C1005-17 Standard test method for reference masses and devices for determining mass and volume for use in the physical testing of hydraulic cements. ASTM International, West Conshohocken, PA, USA, 2017. DOI: 10.1520/C1005-17.10.1520/C1005-17 ↗
35. ASTM C806-12 Standard test method for restrained expansion of expansive cement mortar. ASTM International, West Conshohocken, PA, USA, 2017. DOI: 10.1520/C0806-12.10.1520/C0806-12 ↗
36. ASTM C878 Standard test method for restrained expansion of shrinkage-compensating concrete. ASTM International, West Conshohocken, PA, USA, 2017. DOI: 10.1520/C0878-C0878M-14A.
37. L.S. Barcelo, S. Boivin, S. Rigaud, P. Acker, B. Clavaud, C. Boulay, Linear vs. volumetric autogenous shrinkage measurement: material behaviour or experimental artefact. Persson, B., & Fagerlund, G. (Eds.). Self-desiccation and its importance in concrete technology: Proceedings of the second international research seminar in Lund, June 18, 1999. (Report TVBM 3085). Division of Building Materials, LTH, Lund University, Lund, Sweden, 1999.
38. Measuring techniques for autogenous strain of cement paste10.1617/s11527-006-9180-2 ↗
39. A review on testing methods for autogenous shrinkage measurement of cement-based materials10.1080/21650373.2013.797937 ↗
40. Investigation of properties of fluorogypsum-slag composite binders–hydration, strength and microstructure10.1016/j.cemconcomp.2013.10.010 ↗
41. MathWorks, Curve Fitting Toolbox: User's Guide, MathWorks, Natick, MA, USA. < http://cda.psych.uiuc.edu/matlab_pdf/curvefit.pdf >/, 2004 (accessed on Oct. 19, 2016).
42. Atkinson · 1978
43. Über empirische Funktionen und die Interpolation zwischen äquidistanten Ordinaten
44. USACE, Coastal Engineering Manual (CEM), Engineer Manual 1110-2-1100, U.S. Army Corps of Engineers, Washington, DC, USA, 2002.
45. Geometrical design of berm breakwaters10.9753/icce.v34.structures.25 ↗
46. Design considerations for barrier island nourishments and coastal structures for coastal restoration in Louisiana
47. K.R. Parker, Field and Numerical Investigation of Wave Power and Shoreline Retreat in Terrebonne Bay, Southern Louisiana. MS Thesis, Louisiana State University and Agricultural and Mechanical College, Baton Rouge, LA, USA, 2014.
48. ASTM C469/C469M-14 Standard test method for static modulus of elasticity and Poisson’s ratio of concrete in compression. ASTM International, West Conshohocken, PA, USA, 2014. DOI: 10.1520/C0469-C0469M-14.
49. ASTM C403/C403M-08 Standard test method for time of setting of concrete mixtures by penetration resistance. ASTM International, West Conshohocken, PA, USA, 2008. DOI: 10.1520/C0403-C0403M-08.
50. ASTM C1754/C1754M-12 Standard test method for density and void content of hardened pervious concrete. ASTM International, West Conshohocken, PA, USA, 2012. DOI: 10.1520/ C1754-C1754M-12.
51. ASTM C29/C29M-16 Standard test method for bulk density (unit weight) and voids in aggregate. ASTM International, West Conshohocken, PA, USA, 2016. DOI: 10.1520/C0029_C0029M-16.10.1520/C0029_C0029M-16 ↗
52. Holographic interferometry study of the dissolution and diffusion of gypsum10.1016/j.gca.2007.01.012 ↗
53. The kinetics of dissolution of calcium sulphate dehydrate in water10.1016/0022-0248(76)90247-5 ↗
54. Mehta · 2013
55. Hansen · 2004
56. Fikes · 2013