The effect of span-to-depth ratio on the impact bending strength of poplar LVL
Source abstract
Abstract
Abstract In this study, it was studied the effect of span-to-depth ratio on the impact bending strength of laminated veneer lumber (LVL). For the study, LVL boards were produced from rotary-cut poplar veneer using phenol formaldehyde (PF) adhesive. Test samples were prepared from the boards to determine impact bending strength, density, moisture content, and tensile-shear strength. In addition, the compression ratio and densification ratios of LVL for each panel was determined. The impact bending strengths were tested in flatwise and edgewise directions for different span-to-depth ratios, i.e., 7.5, 10, 12.5, 15, 17.5, and 20. The highest impact bending strength was measured when the span-to-depth ratio was 20. The lowest impact bending strength was measured when the span-to-depth ratio was 10. There was a parabolic relationship between impact bending strength and the span-to-depth ratio. In addition, the test results showed that the impact bending strength of all of the samples tested in the flatwise direction were significantly higher than those tested in the edgewise direction.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Wood Treatment and Properties · Tree Root and Stability Studies · Bamboo properties and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Study of the relationship between flatwise and edgewise modull of elasticity of sawn timber as a means to improve mechanical strength grading technology10.1007/BF02990556 ↗
2. A review of the utilization of hardwoods for LVL10.1007/s002260050120 ↗
3. Hot-pressing stress graded aspen veneer for laminated veneer lumber (LVL)10.1515/HF.2005.002 ↗
4. Properties of laminated veneer lumber (LVL) made with low density hardwood species: effect of the pressure duration10.1007/s00107-007-0209-1 ↗
5. The effects of some factors on the impact bending strength of laminated veneer lumber10.15376/biores.7.4.5855-5863 ↗
6. Evaluation on the suitability of some adhesives for laminated veneer lumber from oil palm trunks10.1016/j.matdes.2009.02.027 ↗
7. Properties of laboratory made yellow poplar (Liriodendron Tulipifera) laminated veneer lumber: effect of the adhesives10.1007/s00107-009-0333-1 ↗
8. Adachi · 2010
9. Flexural properties, bonding performance and splitting strength of LVL reinforced with woven glass fiber10.1016/j.conbuildmat.2013.10.041 ↗
10. Influence of densification on bending strength of laminated beech wood10.15376/biores.10.1.1506-1518 ↗
11. Nail and screw withdrawal strength of laminated veneer lumber made up hardwood and softwood layers10.1016/j.conbuildmat.2005.12.015 ↗
12. The effects of pilot hole, screw types and layer thickness on the with drawal strength of screws in laminated veneer lumber10.1016/j.matdes.2008.11.001 ↗
13. A comparative study on screw withdrawal strength of solid wood material and laminated veneer lumber
14. Contribution factor of wood properties of three poplar clones to strength of laminated veneer lumber
15. Suitability of three hybrid poplar clones for laminated veneer lumber manufacturing using melamine urea formaldehyde adhesive10.15376/biores.5.3.1868-1878 ↗
16. Effects of logs steaming, veneer drying and aging on the mechanical properties of laminated veneer lumber (LVL)10.1016/j.buildenv.2005.08.008 ↗
17. Some physical and mechanical properties of laminated veneer lumber reinforced with woven glass fiber10.1016/j.conbuildmat.2014.06.042 ↗
18. Siewert · 1999
19. Toughness properties for several composite lumber materials
20. Bodig · 1982
21. Drow · 1965
22. Kollmann · 1968
23. Bozkurt · 1996 · 3944
24. TS EN 322 · 1999
25. TS EN 323 · 1999
26. TS EN 314-1 · 1998
27. TS EN 314-2 · 1999
28. TS 2477 · 1976
29. Effects of resin impregnation and process parameters on some properties of poplar LVL
30. Effects of press pressure on glue line thickness and properties of laminated veneer lumber glued with melamine urea formaldehyde adhesive10.15376/biores.7.3.4341-4349 ↗
31. Effect of pre-pressing of veneer on the glueability and properties of veneer-based products10.1007/s00107-010-0486-y ↗
32. Some technological properties of laminated veneer lumber manufactured from pine veneers with melamine added – UF resins
33. Some physical properties of laminated veneer lumbers (LVLs) produced from rotary-peeled veneers of eucalyptus, beech, and poplar
34. Monnin · 1919
35. Özen · 1981 · 120
36. Use of Brazilian eucalyptus to produce LVL panels
37. Begründung der abanderungsvorschlage der prüfnormen für holz
38. Effect of span depth ratio on the bending properties of plywood10.1007/s13196-012-0070-7 ↗
39. Influence of span/depth ratio on the measurement of mode II fracture toughness of wood by end-notched flexure test10.1007/BF00776638 ↗
40. Examination of proper span/depth ratio range in measuring the bending strength of wood based on the elementary bending theory