Degradation behavior of multifunctional carbon fabric-reinforced cementitious matrix composites under anodic polarization
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Concrete Corrosion and Durability · Smart Materials for Construction · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (68)
Show source-provided references
1. fib, fib Model Code for Concrete Structures 2010, Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim, Germany, 2013. https://doi.org/10.1002/9783433604090.10.1002/9783433604090 ↗
2. ACI Committee, Building code requirements for structural concrete (ACI 318-02) and commentary (ACI 318R-02), USA, 2002.
3. ACI Committee, ACI 222R-01 Protection of metals in concrete against corrosion, USA, 2001.
4. NACE International, NACE SP0290-2007 Impressed current cathodic protection of reinforcing steel in atmospherically exposed concrete structures, USA, 2007.
5. Cathodic protection and cathodic prevention10.1016/0950-0618(95)00017-8 ↗
6. The ICCP-SS technique for retrofitting reinforced concrete compressive members subjected to corrosion10.1016/j.conbuildmat.2018.01.096 ↗
7. Combined Impressed Current Cathodic Protection and FRCM Strengthening for Corrosion-Prone Concrete Structures10.1061/(ASCE)CC.1943-5614.0000949 ↗
8. ACI Committee, ACI 440.2R-08 Guide for the Design and Construction of Externally Bonded FRP Systems for Strengthening Concrete Structures, USA, 2008.
9. ACI Committee, ACI 549.4R-13 Guide to design and construction of externally bonded Fabric-Reinforced Cementitious Matrix (FRCM) systems for Repair and Strengthening Concrete and Masonry Structures, USA, 2013.
10. Pull-out of textile reinforcement in concrete10.1016/j.conbuildmat.2014.08.014 ↗
11. A cohesive interface crack model for the matrix – textile debonding in FRCM composites10.1016/j.compstruct.2016.02.019 ↗
12. A comparison of the bond behavior of PBO-FRCM composites determined by double-lap and single-lap shear tests10.1016/j.cemconcomp.2015.07.007 ↗
13. A method for evaluating the bond behavior and anchorage length of embedded carbon yarn in the cementitious matrix10.1016/j.conbuildmat.2020.119067 ↗
14. Bond behavior of carbon fabric reinforced cementitious matrix (FRCM) composites considering matrix impregnation10.1016/j.compstruct.2020.113350 ↗
15. Bond between textile-reinforced mortar (TRM) and concrete substrates: Experimental investigation10.1016/j.compositesb.2016.05.041 ↗
16. Experimental investigation of tensile and bond properties of Carbon-FRCM composites for strengthening masonry elements10.1016/j.compositesb.2017.06.018 ↗
17. An indirect method to calibrate the interfacial cohesive material law for FRCM-concrete joints10.1016/j.matdes.2017.04.038 ↗
18. Experimental and numerical evaluation of fiber-matrix interface behaviour of different FRCM systems10.1016/j.compositesb.2018.12.115 ↗
19. Direct shear bond tests of fabric-reinforced cementitious matrix materials10.1061/(ASCE)CC.1943-5614.0000991 ↗
20. Bond behavior of textile reinforcements - development of a pull-out test and modeling of the respective bond versus slip relation
21. A new pull-out test to study the bond behavior of fiber reinforced cementitious composites10.4028/www.scientific.net/KEM.747.258 ↗
22. Experimental and analytical investigation on bond between Carbon-FRCM materials and masonry10.1016/j.compositesb.2012.10.018 ↗
23. Investigations on the bearing behaviour and application potential of textile reinforced concrete10.1016/j.engstruct.2008.01.006 ↗
24. Load–bearing behaviour and simulation of textile reinforced concrete10.1617/s11527-005-9039-y ↗
25. Contribution to direct tensile testing of textile reinforced concrete (TRC) composites10.1016/j.msea.2011.08.009 ↗
26. On the nonlinear elastic properties of textile reinforced concrete under tensile loading including damage and cracking10.1016/j.msea.2006.02.007 ↗
27. Application of polymers to textile-reinforced concrete10.1061/(ASCE)0899-1561(2006)18:5(670) ↗
28. Arboleda · 2014
29. Residual tensile strength of dry and impregnated reinforcement fibres after exposure to alkaline environments10.1016/j.compositesb.2017.03.005 ↗
30. Comparing durability of steel reinforced grout (SRG) and textile reinforced mortar (TRM) for structural retrofitting
31. Flexural strengthening of RC beams with cement-based composites10.1061/(ASCE)CC.1943-5614.0000218 ↗
32. Stress-strain model for FRCM confined concrete elements10.1016/j.compositesb.2012.07.001 ↗
33. RC beams shear-strengthened with fabric-reinforced-cementitious-matrix (FRCM) composite10.1007/s40091-015-0102-9 ↗
34. Flexural behaviour of RC members strengthened with FRCM: State-of-the-art and predictive formulas10.1016/j.compositesb.2018.04.051 ↗
35. Silica coating for interphase bond enhancement of carbon and AR-glass Textile Reinforced Mortar (TRM)10.1016/j.compositesb.2017.12.045 ↗
36. Micro- and nanoparticle mineral coating for enhanced properties of carbon multifilament yarn cement-based composites10.1016/j.compositesb.2016.12.005 ↗
37. Targeting functionalised carbon nanotubes at the interphase of Textile Reinforced Mortar (TRM) composites10.1016/j.compositesa.2021.106330 ↗
38. Effect of anodic oxidation of coal tar pitch-based carbon fibre on adhesion in epoxy matrix: Part 2. Comparative study of three alkaline solutions10.1016/1359-835X(96)00058-9 ↗
39. X-ray photoelectron spectroscopic studies of carbon-fiber surfaces. 19. Surface chemical changes during electrochemical oxidation in base10.1002/sia.740230715 ↗
40. Surface-oxidized carbon fibers: I. Surface structure and chemistry10.1016/0008-6223(96)00032-2 ↗
41. Surface properties of PAN-based carbon fibers tuned by anodic oxidation in different alkaline electrolyte systems10.1016/S0169-4332(98)00929-5 ↗
42. A surface treatment technique of electrochemical oxidation to simultaneously improve the interfacial bonding strength and the tensile strength of PAN-based carbon fibers10.1016/j.matchemphys.2010.03.045 ↗
43. Stripping mechanism of PAN-based carbon fiber during anodic oxidation in NaOH electrolyte10.1016/j.apsusc.2019.05.018 ↗
44. Recycling of carbon fibre reinforced plastics by electrically driven heterogeneous catalytic degradation of epoxy resin10.1039/C8GC03672A ↗
45. Sustainable recycling of intact carbon fibres from end-of-service-life composites10.1039/C9GC01847F ↗
46. Degradation of carbon fiber reinforced polymer from cathodic protection process on exposure to NaOH and simulated pore water solutions10.1617/s11527-016-0859-8 ↗
47. Corrosion behavior of carbon fiber reinforced polymer anode in simulated impressed current cathodic protection system with 3% NaCl solution10.1016/j.conbuildmat.2016.02.141 ↗
48. Zhang · 2018
49. Durability behavior of polymer impregnated carbon textiles in alkaline solution as CP anode10.1002/maco.201810098 ↗
50. GB/T 3362-2005, Test methods for tensile properties of carbon fiber multifilament, China, 2005.
51. R.B. Polder, W.H.A. Peelen, Service life aspects of cathodic protection of concrete structures, Concr. Repair. A Pract. Guid. (2008).10.1201/9780203864005.ch53 ↗
52. P. Cronstrand, A. Babaahmadi, L. Tang, Z. Abbas, Electrochemical leaching of cementitious materials: an experimental and theoretical study, in: Procedings 1st Int. Symp. Cem. Mater. Nucl. Wastes, 2011: pp. 1–16.
53. The application of novel lightweight functional aggregates on the mitigation of acidification damage in the external anode mortar during cathodic protection for reinforced concrete10.1016/j.corsci.2019.108366 ↗
54. Surface oxides on carbon and their analysis: A critical assessment10.1016/S0008-6223(01)00165-8 ↗
55. Tailoring thermal and flame retardant properties via synergistic effect in polyvinyl alcohol nanocomposites based on polyphosphonate and/or SiO2 nanoparticles10.1016/j.jcomc.2020.100063 ↗
56. Surface characterization of carbon fibers using angle-resolved XPS and ISS10.1016/0008-6223(94)00144-O ↗
57. Basic analytical investigation of plasma-chemically modified carbon fibers10.1016/S0584-8547(02)00101-5 ↗
58. Surface characterization of electrochemically oxidized carbon fibers10.1016/S0008-6223(99)00047-0 ↗
59. Effect of heat treatment on carbon fiber surface properties and fibers/epoxy interfacial adhesion10.1016/j.apsusc.2011.04.129 ↗
60. Interfacial and mechanical properties of carbon fibers modified by electrochemical oxidation in (NH4HCO3)/(NH4)2C2O4·H2O aqueous compound solution10.1016/j.apsusc.2010.03.141 ↗
61. C. Kozlowski, P.M.A. Sherwood, X-ray photoelectron-spectroscopic studies of carbon-fibre surfaces. Part 5.--The effect of pH on surface oxidation, J. Chem. Soc. Faraday Trans. 1 Phys. Chem. Condens. Phases. 81 (1985) 2745. https://doi.org/10.1039/f19858102745.10.1039/f19858102745 ↗
62. Electrochemical oxidation of a carbon black loaded polymer electrode in aqueous electrolytes10.1007/s100080050145 ↗
63. Microtexture and structure of some high tensile strength, PAN-base carbon fibres10.1016/0015-0568(84)90057-5 ↗
64. Structure-property relationships in carbon fibres10.1088/0022-3727/20/3/007 ↗
65. Processing, structure, and properties of carbon fibers10.1016/j.compositesa.2016.10.018 ↗
66. Surface modification and grafting of carbon fibers: A route to better interface10.1016/j.pcrysgrow.2018.07.001 ↗
67. Review: Graphite10.1023/A:1014915307738 ↗
68. Effect of chopped carbon fiber on interfacial behaviors of ICCP-SS system10.1016/j.conbuildmat.2020.122117 ↗