journal article·2022-09

Application of ternary cementless hybrid binders for pervious concrete

Kae-Long Lin, Wei-Ting Lin, Kinga Korniejenko, Hui-Mi Hsu

Publisher page

Abstract

In this study, alkali-free activator-type ternary cementless binders were developed using ground granulated blast-furnace slag (GGBS), co-fired fly ash (CFA), and desulfurization gypsum (DG). The properties of cementless binders were verified and used to investigate the feasibility of application to pervious concrete. The results indicated that including CFA in cementless binders increased the initial and final setting times. The addition of DG shortened the setting time and the addition exceeded 7 wt% resulting in a rapid setting, which did not meet the ASTM C150 specification. A binary cementless binder with a CFA-GGBS mix achieved a maximum compressive strength up to 54% of the cement group, and the optimum mixture was 70% GGBS with 30% CFA. DG increased the SO3 content of the binder and promoted the production of ettringite (AFt), resulting in an effective increase in compressive strength up to 92% of the cement group. The optimum proportion of cementless binders to meet the setting times was 70% GGBS, 25% CFFA, and 5% FGDG, resulting in maximum compressive strength up to 79% of the cement group. During the hardening period of the cementless pastes, the generation of AFt affected the internal pore structures of the C-S-H colloids, resulting in higher capillary pores. DG also accelerated the production of AFt, causing an increase in capillary pores. In addition, the maximum compressive strength of cementless pervious concrete developed in this study reached 12 MPa, and the permeability coefficient was up to 0.156 cm/s. It can meet the requirements of the general pervious pavement specification in Taiwan.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Concrete Corrosion and Durability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (56)

Show source-provided references
1. Sustainable clean pervious concrete pavement production incorporating palm oil fuel ash as cement replacement10.1016/j.jclepro.2017.10.159 ↗
2. Characterization of pervious concrete with blended natural aggregate and recycled concrete aggregates10.1016/j.jclepro.2018.01.205 ↗
3. Effect of eco-friendly pervious concrete with amorphous metallic fiber on evaporative cooling performance10.1016/j.jenvman.2021.113269 ↗
4. Evaluation of surface infiltration performance of permeable pavements10.1016/j.jenvman.2019.02.119 ↗
5. Thermal profiles in pervious concrete during summer rain simulations10.1590/s1517-707620180003.0504 ↗
6. M. Sartipi, F. Sartipi, Stormwater retention using pervious concrete pavement: Great Western Sydney case study, Case Stud. Constr. Mater. 11 (2019), e00274.10.1016/j.cscm.2019.e00274 ↗
7. Evaluation of high-performance porous concrete properties10.1016/j.conbuildmat.2011.12.024 ↗
8. Sustainable design of pervious concrete using waste glass and recycled concrete aggregate10.1016/j.jclepro.2019.06.260 ↗
9. A review on the development of cool pavements to mitigate urban heat island effect10.1016/j.rser.2015.07.177 ↗
10. Evaluation of freeze-thaw durability of pervious concrete by use of operational modal analysis10.1016/j.cemconres.2018.01.021 ↗
11. Evolutionary lattice model for the compaction of pervious concrete in the fresh state10.1016/j.conbuildmat.2015.08.143 ↗
12. Compressive behavior of pervious concretes and a quantification of the influence of random pore structure features10.1016/j.msea.2010.09.024 ↗
13. American Concrete Institute (ACI). ACI 522.R-10, Report on Pervious Concrete. Farmington Hills, MI, 2010.
14. Experimental study on properties of pervious concrete pavement materials10.1016/S0008-8846(02)00966-3 ↗
15. Waste-based pervious concrete for climate-resilient pavements10.3390/ma11060900 ↗
16. Sustainable pervious concrete containing glass powder waste: Performance and modeling10.1016/j.jclepro.2021.128213 ↗
17. Alkali-activated and geopolymer materials developed using innovative manufacturing techniques: A critical review10.1016/j.conbuildmat.2021.124483 ↗
18. Alkali-activated materials10.1016/j.cemconres.2017.02.009 ↗
19. Fabrication and engineering properties of concretes based on geopolymers/alkali-activated binders - A review
20. The evolution of strength and crystalline phases for alkali-activated ground blast furnace slag and fly ash-based geopolymers10.1016/j.cemconres.2009.10.010 ↗
21. Alkali-activated fly ashes: A cement for the future10.1016/S0008-8846(98)00243-9 ↗
22. Compressive strength development and durability of an environmental load-reduction material manufactured using circulating fluidized bed ash and blast-furnace slag10.1016/j.conbuildmat.2017.04.042 ↗
23. Utilizing residues of CFB co-combustion of coal, sludge and TDF as an alkali activator in eco-binder10.1016/j.conbuildmat.2015.01.062 ↗
24. Composite properties of non-cement blended fiber composites without alkali activator10.3390/ma13061443 ↗
25. Green concrete with ground granulated blast-furnace slag activated by desulfurization gypsum and electric arc furnace reducing slag10.1016/j.jclepro.2020.122212 ↗
26. Development of a new cementless binder for controlled low strength material (CLSM) using entirely by-products10.1016/j.conbuildmat.2019.02.088 ↗
27. Utilization of low-alkalinity binders in cemented paste backfill from sulphide-rich mine tailings10.1016/j.conbuildmat.2021.123221 ↗
28. A study on the mixed properties of green controlled low strength cementitious10.2478/msp-2021-0004 ↗
29. Effects of gypsum and phosphoric acid on the properties of sodium silicate-based alkali-activated slag pastes10.1016/j.cemconcomp.2003.12.001 ↗
30. Study on the performance of FGD gypsum-metakaolin-cement composite cementitious system10.1016/j.conbuildmat.2016.09.134 ↗
31. Japan Road Association, Pavement Testing Manual, Supplement Volume 317. Japan Road Association; Tokyo, Japan: 1996. (In Japanese).
32. Properties of controlled low strength material with circulating fluidized bed combustion ash and recycled aggregates10.3390/ma11050715 ↗
33. Activation of portland cement blended with high volume of fly ash using Na2SO410.1016/j.cemconcomp.2019.103417 ↗
34. Characterisation of the hydration products of a chemically and mechanically activated high coal fly ash hybrid cement10.3390/min12020157 ↗
35. Effect of flue gas desulfurization gypsum on the properties of calcium sulfoaluminate cement blended with ground granulated blast furnace slag10.3390/ma14020382 ↗
36. Effect of desulfurization gypsum and quicklime on performance of fly ash filling paste
37. Effects of high CaO fly ash and sulfate activator as a finer binder for cementless grouting material10.3390/ma12223664 ↗
38. Performance evaluation of cementless composites with alkali-sulfate activator for field application10.3390/ma13235410 ↗
39. Implementation of porous material through eco-tech for deep cement–soil mixing10.1080/1064119X.2017.1399944 ↗
40. The potential of ladle slag and electric arc furnace slag use in synthesizing alkali activated materials; the influence of curing on mechanical properties10.3390/ma12071173 ↗
41. Properties of cementless binders using desulfurization slag as an alkali activator
42. Compressive strength and microstructure properties of alkali-activated systems with blast furnace slag, desulfurization slag, and gypsum10.1155/2018/6123070 ↗
43. Effect of slag gypsum binder as a substitute to cement on the stability of backfill mining
44. Establishment of the durability indices for cement-based composite containing supplementary cementitious materials10.1016/j.matdes.2011.12.030 ↗
45. Effects of incorporating large quantities of copper tailings with various particle sizes on the strength and pore structure of cement-based materials10.1016/j.conbuildmat.2022.127150 ↗
46. Mechanical strengths, drying shrinkage and pore structure of cement mortars with hydroxyethyl methyl cellulose10.1016/j.conbuildmat.2021.125683 ↗
47. Physical–microstructural evaluation and sulfate resistance of no-cement mortar developed from a ternary binder of industrial by-products10.1002/ep.13421 ↗
48. Incorporating industrial by-products into cement-free binders: Effects on water absorption, porosity, and chloride penetration10.1016/j.conbuildmat.2021.124675 ↗
49. Investigation of compressive strength and microstructures of activated cement free binder from fly ash - calcium carbide residue mixture
50. The synergistic effect of AFt enhancement and expansion in Portland cement-aluminate cement-FGD gypsum composite cementitious system10.1016/j.conbuildmat.2018.09.139 ↗
51. Calcination of calcium sulphoaluminate cement using flue gas desulfurization gypsum as whole calcium oxide source10.1016/j.conbuildmat.2019.116676 ↗
52. Public Construction Commission · 2013
53. Y0 Zhao, Total recycling of low-quality urban-fringe construction and demolition waste towards the development of sustainable cement-free pervious concrete: The proof of concept10.1016/j.jclepro.2022.131464 ↗
54. A.M. Azad, A. Anshul, N. Azad, S.M.S.M.K. Samarakoon, R. Yadav, H. Bherwani, A. Gupta, K.F. Gebremariam, Pervious geopolymer concrete as sustainable material for environmental application, Mater. Lett., 318 (2022) 132176.10.1016/j.matlet.2022.132176 ↗
55. Physical, mechanical properties and durability of cement mortars containing fly ash from the sewage sludge incineration process10.1016/j.jclepro.2022.131055 ↗
56. Performance evaluation of pervious concrete pavements with recycled concrete aggregate10.1016/j.conbuildmat.2021.125384 ↗