Long-term corrosion resistance of Cu-Al-Mn superelastic alloys and steel rebar for use in bridges
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Concrete Corrosion and Durability · Corrosion Behavior and Inhibition · Structural Behavior of Reinforced Concrete
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (67)
Show source-provided references
1. An experimental investigation of innovative bridge columns with engineered cementitious composites and Cu-Al-Mn super-elastic alloys10.1088/0964-1726/24/8/085029 ↗
2. Use of shape-memory alloys in construction: A critical review
3. Low-damage precast columns for accelerated bridge construction in high seismic zones10.1061/(ASCE)BE.1943-5592.0000806 ↗
4. Seismic design of bridge columns incorporating mechanical bar splices in plastic hinge regions10.1016/j.engstruct.2016.06.041 ↗
5. Seismic performance of precast columns with mechanically spliced column-footing connections10.14359/51686624 ↗
6. A bridge column with superelastic NiTi SMA and replaceable rubber hinge for earthquake damage mitigation10.1088/0964-1726/25/7/075012 ↗
7. Resilient deconstructible columns for accelerated bridge construction in seismically active areas10.1177/1045389X16679285 ↗
8. Cyclic response of concrete bridge columns using superelastic nitinol and bendable concrete
9. Shake-Table Studies of a Four-Span Bridge Model with Advanced Materials10.1061/(ASCE)ST.1943-541X.0000457 ↗
10. Ductile Cu-Al-Mn based shape memory alloys: General properties and applications10.1179/174328408X302567 ↗
11. Effects of aging on stress-induced martensitic transformation in ductile Cu-Al-Mn-based shape memory alloys
12. Loading rate and temperature dependency of superelastic Cu-Al-Mn alloys10.1016/j.conbuildmat.2013.12.002 ↗
13. Orientation dependence of plasticity and fracture in single-crystal superelastic Cu-Al-Mn SMA bars10.1061/(ASCE)MT.1943-5533.0003568 ↗
14. Applications of shape memory alloys in structural engineering with a focus on concrete construction – A comprehensive review10.1016/j.conbuildmat.2022.127565 ↗
15. Cyclic tension–compression behavior of superelastic shape memory alloy bars with buckling-restrained devices10.1016/j.conbuildmat.2018.07.047 ↗
16. Plastic hinge relocation in reinforced concrete beams using Cu-Al-Mn SMA bars10.1016/j.engstruct.2018.08.072 ↗
17. Mechanical properties of superelastic Cu-Al-Be wires at cold temperatures for the seismic protection of bridges10.1088/0964-1726/17/2/025008 ↗
18. Low-cycle fatigue behavior of Cu-Al-Mn and Ni-Ti superelastic alloys at different temperatures (Under review)10.1088/1361-665X/ac97d3 ↗
19. Functional fatigue of polycrystalline Cu-Al-Mn superelastic alloy bars under cyclic tension10.1061/(ASCE)MT.1943-5533.0001417 ↗
20. B. Gencturk, Material Characteristics of Cu-Based Superelastic Alloys for Applications in Bridge Columns to Improve Seismic Performance. National Cooperative Highway Research Program (NCHRP) IDEA Research Report 210.(In Print)., (n.d.).
21. Potential of superelastic Cu-Al-Mn alloy bars for seismic applications10.1002/eqe.1029 ↗
22. Influence of aluminum and manganese concentration on the shape memory characteristics of Cu-Al-Mn shape memory alloys10.1016/j.jallcom.2007.04.254 ↗
23. Characteristics of Cu-Al-Mn-based shape memory alloys and their applications10.1016/j.msea.2003.12.048 ↗
24. Grain size dependence of pseudoelasticity in polycrystalline Cu-Al-Mn-based shape memory sheets10.1016/j.actamat.2013.03.022 ↗
25. Y. Sutou, T. Omori, K. Yamauchi, N. Ono, R. Kainuma, K. Ishida, Effect of grain size and texture on pseudoelasticity in Cu–Al–Mn-based shape memory wire, Acta Mater. 53 (n.d.) 4121–4133.10.1016/j.actamat.2005.05.013 ↗
26. The roles of grain orientation and grain boundary characteristics in the enhanced superelasticity of Cu71.8Al17.8Mn10.4 shape memory alloys10.1016/j.matdes.2014.07.070 ↗
27. Abnormal grain growth induced by cyclic heat treatment10.1126/science.1238017 ↗
28. Ultra-large single crystals by abnormal grain growth10.1038/s41467-017-00383-0 ↗
29. Feasibility of Roll-Threading Superelastic Cu-Al-Mn SMA Rods10.1061/(ASCE)MT.1943-5533.0003874 ↗
30. Feasibility of Cu-Al-Mn superelastic alloy bars as reinforcement elements in concrete beams10.1088/0964-1726/22/2/025025 ↗
31. Integrated mechanical and material design of quasi-zero-stiffness vibration isolator with superelastic Cu-Al-Mn shape memory alloy bars10.1016/j.jsv.2015.08.018 ↗
32. Shaking table tests of steel frame with superelastic Cu-Al-Mn SMA tension braces10.1002/eqe.2659 ↗
33. Optimal design of bridge columns constructed with engineered cementitious composites and Cu-Al-Mn superelastic alloys10.1016/j.engstruct.2019.109531 ↗
34. Structural assessment of bridge columns with engineered cementitious composites and Cu-Al-Mn superelastic alloys10.1016/j.conbuildmat.2019.01.102 ↗
35. Modelling of pitting corrosion in marine and offshore steel structures - A technical review10.1016/j.jlp.2015.06.008 ↗
36. Influences of corrosion degree and corrosion morphology on the ductility of steel reinforcement
37. Mathematical models to predict the mechanical behavior of reinforcements depending on their degree of corrosion and the diameter of the rebars10.1016/j.conbuildmat.2014.03.003 ↗
38. Comparative assessment of mechanical properties of HPS between electrochemical corrosion and spray corrosion10.1016/j.conbuildmat.2019.117735 ↗
39. Corrosion effects on the mechanical properties of reinforcing steel bars. Fatigue and σ-ε behavior10.1016/j.conbuildmat.2015.10.139 ↗
40. In-depth distribution of rusts on a plain carbon steel and weathering steels exposed to coastal-industrial atmosphere for 17 years10.1016/S0010-938X(03)00070-2 ↗
41. Corrosion behavior and mechanical property degradation of weathering steel in marine atmosphere10.1061/(ASCE)MT.1943-5533.0002814 ↗
42. Optimized Cr concentration in reinforcement steel for high corrosion resistance in simulated pore solution by electrochemical and Cyclic corrosion tests10.2355/isijinternational.ISIJINT-2016-088 ↗
43. A1035/A1035M Standard Specification for Deformed and Plain, Low-carbon, Chromium, Steel Bars for Concrete Reinforcement
44. Corrosion characteristics of S23043 duplex stainless steel bars
45. A review of the use of stainless steel for masonry repair and reinforcement10.1016/j.conbuildmat.2018.06.034 ↗
46. Performance of epoxy-coated rebars in bridge decks
47. Use of infrared thermal imaging to detect corrosion of epoxy coated and uncoated rebar in concrete10.1016/j.conbuildmat.2020.120162 ↗
48. Effects of Mn additions on the structure, mechanical properties, and corrosion behavior of Cu-Al-Ni shape memory alloys
49. Chemical resistance of Cu-Al-Mn superelastic alloy bars in acidic and alkaline environments10.1061/(ASCE)MT.1943-5533.0003478 ↗
50. Exploratory investigation on mechanical anchors for connecting SMA bars to steel or FRP bars10.1617/s11527-010-9601-0 ↗
51. D. Hillis, M.S. Saiidi, CCEER-09-03: Design, Construction, and Nonlinear Dynamic Analysis of Three Bridge Bents Used in a Bridge System Test, n.d.
52. ASTM, A516/A516M Standard Specification for Pressure Vessel Plates, Carbon Steel , for Moderate- and Lower-Temperature Service, Annu. B. ASTM Stand. 10 (2011).
53. ASTM, A615/A615M: Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement, Astm. (2020).
54. ASTM, A955/A955M Standard Specification for Deformed and Plain Stainless Steel Bars for Concrete Reinforcement, (2020).
55. ASTM International, Standard Practice for Operating Salt Spray (FOG) Apparatus, Water. 03 (2003).
56. ASTM, Standard Practice for Preparing, Cleaning, and Evaluating Corrosion Test Specimens. Designation: G1-03, ASTM Spec. Tech. Publ. (2017).
57. ASTM A370-19, Standard Test Methods and Definitions for Mechanical Testing of Steel Products, ASTM Int. West Conshohocken, PA, USA. (2019).
58. Astm, ASTM G5 Standard Reference Test Method for Making Potentiodynamic Anodic Polarization Measurements, Annu. B. ASTM Stand. (2014).
59. Cyclic stress-strain response of superelastic Cu-Al-Mn alloy single crystals10.1016/S0921-5093(98)01095-8 ↗
60. Corrosion of high chromium and conventional steels embedded in concrete10.1061/(ASCE)0887-3828(2005)19:1(56) ↗
61. Degradation relationships for the mechanical properties of corroded steel rebars10.1016/j.conbuildmat.2017.04.209 ↗
62. The influence of corrosion and cross-section diameter on the mechanical properties of B500 c steel10.1007/s11665-008-9281-x ↗
63. The influence of corrosion and cross-section diameter on the mechanical properties of B500c steel10.1007/s11665-008-9281-x ↗
64. Effect of degree of corrosion on the properties of reinforcing steel bars10.1016/S0950-0618(01)00009-5 ↗
65. Negative Poisson’s ratio in Heusler-type Cu–Al–Mn shape memory alloy10.1016/j.scriptamat.2019.10.015 ↗
66. ASTM Standard E8/E8M-13a, “Standard Test Methods for Tension Testing of Metallic Materials,” 2013. https://doi.org/10.1520/E0008_E0008M-13A.10.1520/E0008_E0008M-13A ↗
67. Electrochemical behavior of mild and corrosion resistant concrete reinforcing steels10.1016/j.conbuildmat.2019.117205 ↗