Fluidised-bed incineration bottom ash as the sole precursor of alkali-activated binders: A comparison with bottom ash from grate incinerators
Source abstract
Abstract
The novel formulation of alkali-activated binders (AABs) using incineration bottom ash (IBA) from fluidised bed (FB) combustion technology as a sole precursor was assessed. In addition, IBA-FB was compared with IBA from moving grate (IBA-MG) combustion technology. The AABs formulated with IBA-FB (AAB-FB) and IBA-MG (AAB-MG) were also evaluated from a physicochemical, mechanical, and environmental perspective. The results revealed that specific surface area in IBA-FB hinders the retention of kneading water of fresh pastes, affecting the workability, consistency, porosity, and mechanical strength of AAB-FB. Moreover, the low calcium content of IBA-FB requires that the formulated AABs must be cured at higher curing temperatures to ensure the formation of (N,C)ASH gels, while the high calcium content of IBA-MG promotes the formation of CSH gels at room temperature. The compressive strength results demonstrated that AAB-MG (≈ 11 MPa) and AAB-FB (≈ 8 MPa) could be used for non-structural purposes.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Concrete and Cement Materials Research · Recycling and utilization of industrial and municipal waste in materials production · Building materials and conservation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Technologies for the management of MSW incineration ashes from gas cleaning: New perspectives on recovery of secondary raw materials and circular economy10.1016/j.scitotenv.2018.04.150 ↗
2. Influence of different monomer ratios and recycled concrete aggregate on mechanical properties and durability of geopolymer concretes10.1016/j.conbuildmat.2019.01.174 ↗
3. Global CO2 emissions from cement production10.5194/essd-10-195-2018 ↗
4. Alkali-activated materials10.1016/j.cemconres.2017.02.009 ↗
5. Management and valorisation of wastes through use in producing alkali-activated cement materials10.1002/jctb.4927 ↗
6. Characterization and application of municipal solid waste incineration (MSWI) bottom ash and waste granite powder in alkali activated slag10.1016/j.jclepro.2017.06.218 ↗
7. Lightweight aerated metakaolin-based geopolymer incorporating municipal solid waste incineration bottom ash as gas-forming agent10.1016/j.jclepro.2017.12.267 ↗
8. Use of slaked lime and Portland cement to improve the resistance of MSWI bottom ash-GBFS geopolymer concrete against carbonation10.1016/j.conbuildmat.2018.01.089 ↗
9. Cooperative action and compatibility between Portland cement and MSWI bottom ash alkali-activated double gel system materials10.1016/j.conbuildmat.2019.03.141 ↗
10. Effect of activated silica on polymerization mechanism and strength development of MSWI bottom ash alkali-activated mortars10.1016/j.conbuildmat.2018.12.125 ↗
11. Recycling municipal solid waste incineration slag and fly ash as precursors in low-range alkaline cements10.1016/j.wasman.2020.01.013 ↗
12. Feasibility Study of Municipal Solid Waste Incinerator Bottom Ash as Geopolymer Precursor
13. Incinerator bottom ash (IBA) aerated geopolymer10.1016/j.conbuildmat.2016.02.164 ↗
14. Thermal Treatment on MSWI Bottom Ash for the Utilisation in Alkali Activated Materials
15. Alkali-activated binders based on incinerator bottom ash combined with limestone-calcined clay or fly ash10.1016/j.conbuildmat.2021.126306 ↗
16. Alkali-activated binders based on the coarse fraction of municipal solid waste incineration bottom ash10.1016/j.bsecv.2020.12.002 ↗
17. Weathered bottom ash from municipal solid waste incineration: Alkaline activation for sustainable binders10.1016/j.conbuildmat.2022.126983 ↗
18. Youcai · 2017 · 61
19. Material analysis of Bottom ash from waste-to-energy plants10.1016/j.wasman.2017.10.045 ↗
20. The evolution of waste-to-energy incineration: A review10.1016/j.rser.2018.04.088 ↗
21. Combustion of municipal solid waste in fluidized bed or on grate – A comparison10.1016/j.wasman.2020.04.050 ↗
22. Status and perspectives of municipal solid waste incineration in China: A comparison with developed regions10.1016/j.wasman.2017.04.014 ↗
23. Life-cycle assessment (EASEWASTE) of two municipal solid waste incineration technologies in China10.1177/0734242X10361761 ↗
24. Temporal trends and spatial variation characteristics of hazardous air pollutant emission inventory from municipal solid waste incineration in China10.1021/es302343s ↗
25. 5 - Pre-processing and treatment of municipal solid waste (MSW) prior to incineration
26. Opportunities and barriers for valorizing waste incineration bottom ash: Iberian countries as a case study10.3390/app11209690 ↗
27. Environmental potential assessment of MSWI bottom ash-based alkali-activated binders10.1016/j.jhazmat.2021.125828 ↗
28. Municipal solid waste incineration bottom ash as alkali-activated cement precursor depending on particle size10.1016/j.jclepro.2019.118443 ↗
29. Alkali-activated binders using bottom ash from waste-to-energy plants and aluminium recycling waste10.3390/app11093840 ↗
30. Municipal solid waste incineration bottom ash as sole precursor in the alkali-activated binder formulation10.3390/app10124129 ↗
31. Description and survey of methodologies for the determination of amorphous content via X-ray powder diffraction10.1524/zkri.2011.1437 ↗
32. Characterization of calcium-containing phases in alkali-activated municipal solid waste incineration bottom ash binder through chemical extraction and deconvoluted Fourier transform infrared spectra10.1016/j.jclepro.2018.05.049 ↗
33. Structure of calcium silicate hydrate (C-S-H): near-, mid-, and far-infrared spectroscopy10.1111/j.1151-2916.1999.tb01826.x ↗
34. Material characterization of the MSWI bottom ash as a function of particle size. Effects of glass recycling over time10.1016/j.scitotenv.2017.01.047 ↗
35. Quantitative determination of reactive SiO2 and Al2O3 in aluminosilicate materials, 13th Int
36. Alkali activation of fly ashes. Part 1: Effect of curing conditions on the carbonation of the reaction products10.1016/j.fuel.2005.03.030 ↗
37. Role of the silica source on the geopolymerization rate: A thermal analysis study10.1016/j.jnoncrysol.2013.01.034 ↗
38. Council of the European Union, 2003/33/EC, Council Decision establishing criteria and procedures for the acceptance of waste at landfills pursuant to Article 16 of and Annex II to Directive 1999/31/EC, Off. J. Eur. Communities. (2003) 27–49.
39. Porosity-based models for estimating the mechanical properties of self-compacting concrete with coarse and fine recycled concrete aggregate
40. Influence of NaOH content on the alkali conversion mechanism in MSWI bottom ash alkali-activated mortars10.1016/j.conbuildmat.2020.118582 ↗
41. Mid-infrared spectroscopic studies of alkali-activated fly ash structure10.1016/j.micromeso.2005.05.057 ↗
42. Effect of temperature and humidity on the synthesis of alkali-activated binders based on bottom ash from municipal waste incineration10.3390/su14031848 ↗
43. Early-age strength of CO2 cured alkali-activated blast furnace slag pastes10.1016/j.conbuildmat.2021.123075 ↗
44. Alkali activated materials using pumice from the Aeolian Islands (Sicily, Italy) and their potentiality for cultural heritage applications: Preliminary study10.1016/j.conbuildmat.2020.120391 ↗
45. Compatibility studies between N-A-S-H and C-A-S-H gels. Study in the ternary diagram Na2O-CaO-Al2O3-SiO2-H2O10.1016/j.cemconres.2011.05.006 ↗
46. D. Torréns-Martín, L. Fernández-Carrasco, S. Martínez-Ramírez, C-S-H gels in blended cements: Study by infrared spectroscopy, (2015).
47. Self-compacting concrete with recycled concrete aggregate subjected to alternating-sign temperature variations: Thermal strain and damage
48. Alkali-activated binders based on the coarse fraction of municipal solid waste incineration bottom ash10.1016/j.bsecv.2020.12.002 ↗