Mechanical characterization of gypsum mortars with waste from the automotive sector
Source abstract
Abstract
The construction sector is one of the main industries generating greater environmental impacts. In this sense, the European Commission is forcing the sector to implement alternative measurement and strategies to tackle this situation and bring the sector to a circular economy. One of the adopted measures is the use of recycled materials to produce construction materials and products. In this sense, many scientific works have been conducted analyzing the incorporation of different waste categories in gypsum products. In this sense, the main objective of this research is to characterize new gypsum-based materials that incorporate waste from the automotive sector. For this, mixed waste (containing polyurethane, cardboard and fiberglass) obtained during the production of automobiles’ backboards was used. A total of 171 specimens were produced incorporating different percentage and size of mixed waste. These specimens were tested according to the bulk density, superficial hardness, and flexural, compressive and bonding strengths. Results show that it is possible to incorporate up to 11% of mixed waste overpassing the minimum strength values established by the regulations. In addition, the lightness of the material and its compression and flexion behavior improved considerably compared to the reference specimens without any waste addition.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Recycled Aggregate Concrete Performance · Innovative concrete reinforcement materials · Innovations in Concrete and Construction Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. M. Menegaki and D. Damigos, “A review on current situation and challenges of construction and demolition waste management,” Current Opinion in Green and Sustainable Chemistry, 2018.10.1016/j.cogsc.2018.02.010 ↗
2. Osmani · 2019
3. Influence of four socioeconomic indices and the impact of economic crisis on solid waste generation in Europe10.1016/j.wasman.2019.04.012 ↗
4. Construction and demolition waste management in China through the 3R principle10.1016/j.resconrec.2017.09.029 ↗
5. K. Adams, M. Osmani, T. Thorpe, and J. Thornback, “Circular economy in construction: current awareness, challenges and enablers,” Proceedings of the Institution of Civil Engineers - Waste and Resource Management, vol. 170, no. 1, pp. 15-24, 2017.10.1680/jwarm.16.00011 ↗
6. Construction and demolition waste best management practice in Europe10.1016/j.resconrec.2018.04.016 ↗
7. Environmental performance of construction waste: comparing three scenarios from a case study in Catalonia, Spain10.1016/j.wasman.2009.11.013 ↗
8. Comparative study of three types of fine recycled aggregates from construction and demolition waste (CDW), and their use in masonry mortar fabrication10.1016/j.jclepro.2016.01.059 ↗
9. Properties of gypsum composites containing vermiculite and polypropylene fibers: Numerical and experimental results10.1016/j.enbuild.2013.11.047 ↗
10. Characterization of gypsum plasterboard with polyurethane foam waste reinforced with polypropylene fibers10.3989/mc.2016.06015 ↗
11. Development of cork–gypsum composites for building applications10.1016/S0950-0618(99)00021-5 ↗
12. Life cycle energy and material flow implications of gypsum plasterboard recycling in the European Union10.1016/j.resconrec.2016.01.014 ↗
13. The influences of gypsum water-proofing additive on gypsum crystal growth10.1016/j.matlet.2006.06.005 ↗
14. Calcium sulphate hemihydrate hydration leading to gypsum crystallization10.1016/j.pcrysgrow.2007.01.002 ↗
15. Impact of wetting–drying cycles on the mechanical properties and microstructure of wood waste–gypsum composites10.3390/ma12111829 ↗
16. “A review of the research about gypsum mortars with waste aggregates,” Journal of Building
17. Mechanical characterization of gypsum composites containing inert and insulation materials from construction and demolition waste and further application as a gypsum block10.3390/ma13010193 ↗
18. Eco plaster mortars with addition of waste for high hardness coatings10.1016/j.conbuildmat.2017.10.037 ↗
19. Influence of the heating process on the use of gypsum wastes in plasters: Mechanical, thermal and environmental analysis10.1016/j.jclepro.2019.01.053 ↗
20. Analysis of the feasibility of the use of CDW as a low-environmental-impact aggregate in conglomerates10.1016/j.conbuildmat.2018.05.011 ↗
21. Lightweight material made with gypsum and EPS waste with enhanced mechanical strength
22. Lightweight material made with gypsum and extruded polystyrene waste with enhanced thermal behaviour10.1016/j.conbuildmat.2015.05.040 ↗
23. New plaster composite with mineral wool fibres from CDW recycling10.1155/2015/854192 ↗
24. Physical and mechanical properties of wood-gypsum composites from demolition material in rehabilitation works10.1016/j.conbuildmat.2016.03.137 ↗
25. Effect of silica fume and expanded perlite addition on the technical properties of the fly ash–lime–gypsum mixture10.1016/j.conbuildmat.2007.01.011 ↗
26. Strength and workability of masonry mortars manufactured with ladle furnace slag10.1016/j.resconrec.2009.04.015 ↗
27. A geração de resíduos sólidos em um processo produtivo de uma indústria automobilística: uma contribuição para a redução10.1590/0104-530X707 ↗
28. Composites with recycled rubber aggregates: Properties and opportunities in construction10.1016/j.conbuildmat.2018.08.069 ↗
29. Lightweight plaster materials with enhanced thermal properties made with polyurethane foam wastes10.1016/j.conbuildmat.2011.10.055 ↗
30. Influence of proportion and particle size gradation of rubber from end-of-life tires on mechanical, thermal and acoustic properties of plaster–rubber mortars10.1016/j.matdes.2012.12.063 ↗
31. Improvement of gypsum plaster strain capacity by the addition of rubber particles from recycled tyres10.1016/j.conbuildmat.2012.04.093 ↗
32. Influence of tire rubber waste on the fire behavior of gypsum coatings of construction and structural elements10.3989/mc.2022.06421 ↗
33. Mechanical Behavior of Plaster Composites Based on Rubber Particles from End-of-Life Tires Reinforced with Carbon Fibers10.3390/ma14143979 ↗
34. Design and Characterization of Gypsum Mortars Dosed with Polyurethane Foam Waste PFW10.3390/ma13071497 ↗
35. Comparative Life Cycle Assessment (LCA) between standard gypsum ceiling tile and polyurethane gypsum ceiling tile10.1016/j.enbuild.2022.111867 ↗
36. UNE EN 13279-2, Gypsum binders and gypsum plasters. Part 2: Test methods, 2006.
37. UNE 102042 Yesos y escayolas de construcción. Otros métodos de ensayo., AENOR, 2014.
38. Manual del yeso
39. Dehydration behaviour of a natural gypsum and a phosphogypsum during milling10.1016/S0040-6031(99)00083-0 ↗
40. The differential thermal analysis of natural and synthetic hydrates of calcium sulphate10.1139/v60-131 ↗
41. J. Santa Cruz Astorqui, M. del Río Merino, P. Villoria Sáez, and C. Porras-Amores, Analysis of the relationship between density and mechanical strength of lightened gypsums: proposal for a coefficient of lightening Advances in Materials Science and Engineering vol. 2017, no. Article ID 7092521 2017.10.1155/2017/7092521 ↗
42. UNE-EN 13279–1, Construction gypsums and gypsum-based binders for construction. Part 1: Definitions and specifications, AENOR, 2006.