X-ray computed tomography analysis of internal voids in steel slag asphalt mixture under freeze–thaw damage and microwave healing process
Source abstract
Abstract
In this work, the variation characteristics of different scale voids under freeze–thaw damage and microwave healing were studied by X-ray computed tomography (CT). Firstly, the scale classification of voids was carried out to analyze the initial distribution state of voids. Then the distribution of the horizontal plane and vertical direction was quantitatively characterized, and the source of the damage-healing effect was analyzed by using iterative variation indexes. Finally, the critical void was judged by combining the total and relative iterative variation rates. The results show that the area of small voids (0.15 ∼ 2.0 mm 2) accounts for 55.7 %, and the number accounts for 90.17 % of the whole, serious interference with overall development when voids are not classified. The initial distribution of voids at different scales is quite different. The void growth is relatively uniform in the horizontal plane. From the distribution of the number of voids, the inner region is more prone to coherent vertical cracks, and the outer region is more prone to discrete micro-cracks. The role of voids at different scales in the damage-healing process is different. Small voids are the critical voids in the freeze–thaw damage stage. Both small and big voids are critical voids in the healing stage. This work is helpful to better understand the damage-healing process of steel slag asphalt mixture at mesoscale and contribute to the sustainability of asphalt pavement.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Rock Mechanics and Modeling · Concrete and Cement Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (66)
Show source-provided references
1. Low temperature performance characteristics of polyethylene modified asphalts - A review10.1016/j.conbuildmat.2020.120704 ↗
2. Application of spectrophotometry on detecting asphalt content of emulsified asphalt10.1016/j.jclepro.2019.01.102 ↗
3. Influence of aging induced by mutation in temperature on property and microstructure development of asphalt binders10.1016/j.conbuildmat.2021.126083 ↗
4. Damage evolution of asphalt mixture under freeze-thaw cyclic loading from a mechanical perspective10.1016/j.ijfatigue.2020.105923 ↗
5. A fracture-based approach to characterize long-term performance of asphalt mixes under moisture and freeze-thaw conditions10.1016/j.engfracmech.2020.107418 ↗
6. Decay pattern of self-healing temperature susceptibility of bitumens at various ageing states10.1016/j.conbuildmat.2022.126668 ↗
7. Self-healing asphalt review: from idea to practice10.1002/admi.201800536 ↗
8. Induced heating-healing of conductive asphalt concrete as a sustainable repairing technique: A review
9. Preparation of capsules containing rejuvenators for their use in asphalt concrete10.1016/j.jhazmat.2010.08.078 ↗
10. Design and construction of microcapsules containing rejuvenator for asphalt10.1016/j.powtec.2012.11.013 ↗
11. A comparative study on the release behavior of self-healing capsules under different asphalt mixing and transportation conditions10.1016/j.conbuildmat.2022.128674 ↗
12. Advances in controlled release of microcapsules and promising applications in self-healing of asphalt materials10.1016/j.jclepro.2021.126270 ↗
13. Architected cellular particles to mitigate asphalt stone loss10.1016/j.conbuildmat.2022.127056 ↗
14. Sustained-release calcium alginate/diatomite capsules for sustainable self-healing asphalt concrete10.1016/j.jclepro.2022.133639 ↗
15. Deicing efficiency analysis and economic-environment assessment of a novel induction heating asphalt pavement10.1016/j.jclepro.2020.123123 ↗
16. Exploring the energy-saving potential of electromagnetic induction pavement via magnetic concentrating technique10.1016/j.energy.2020.118650 ↗
17. Evaluation of self-healing properties of asphalt mixture containing steel slag under microwave heating: Mechanical, thermal transfer and voids microstructural characteristics10.1016/j.jclepro.2022.130932 ↗
18. Thermal transfer characteristics of asphalt mixtures containing hot poured steel slag through microwave heating10.1016/j.jclepro.2021.127225 ↗
19. Effect of air voids content on asphalt self-healing via induction and infrared heating10.1016/j.conbuildmat.2016.09.115 ↗
20. Induction heating of mastic containing conductive fibers and fillers10.1617/s11527-010-9644-2 ↗
21. P. Apostolidis, X. Liu, C. Kasbergen, A.T. Scarpas, M. Martinus van de Ven, Toward the Design of an Induction Heating System for Asphalt Pavements with the Finite Element Method, (2017). https://journals.sagepub.com/doi/10.3141/2633-16 (accessed November 12, 2022).10.3141/2633-16 ↗
22. Evaluation of the induction healing effect of porous asphalt concrete through four point bending fatigue test10.1016/j.conbuildmat.2011.10.058 ↗
23. Promoting the dispersion of LDHs powder in bitumen with pre-dispersion and microwave heating10.1016/j.conbuildmat.2015.06.012 ↗
24. Microwave versus conventional sintering: A review of fundamentals, advantages and applications10.1016/j.jallcom.2010.01.068 ↗
25. Electrical and mechanical properties of asphalt concrete containing conductive fibers and fillers10.1016/j.conbuildmat.2016.06.063 ↗
26. Technology method and functional characteristics of road thermoelectric generator system based on Seebeck effect10.1016/j.apenergy.2022.120459 ↗
27. Natural factors related to the differential heating of aggregates exposed to microwaves10.1016/j.conbuildmat.2021.125654 ↗
28. Investigating the differences between steel slag and natural limestone in asphalt mixes in terms of microscopic mechanism, fatigue behavior and microwave-induced healing performance10.1016/j.conbuildmat.2022.127107 ↗
29. Evaluation of the effect of Waste steel Shaving, damage severity and strain level on the healing behavior of asphalt mixtures at different damaging-healing cycles10.1016/j.conbuildmat.2022.128514 ↗
30. Preparation and anti-icing performance of acrylic superhydrophobic asphalt pavement coating with microwave heating function10.1016/j.conbuildmat.2022.128289 ↗
31. Dielectric properties versus microwave heating susceptibility of aggregates for self-healing asphalt mixtures10.1016/j.conbuildmat.2021.123475 ↗
32. Characterization and microwave healing properties of different asphalt mixtures suffered freeze-thaw damage10.1016/j.jclepro.2021.128823 ↗
33. Enhanced induction heating and self-healing performance of recycled asphalt mixtures by incorporating steel slag10.1016/j.jclepro.2022.132999 ↗
34. Microwave heating properties of steel slag asphalt mixture using a coupled electromagnetic and heat transfer model10.1016/j.conbuildmat.2021.123248 ↗
35. A method for bottom-up cracks healing via selective and deep microwave heating10.1016/j.autcon.2020.103426 ↗
36. Influence of the particle sizes and densities of RAP on microwave heating efficiency10.1016/j.aej.2021.04.093 ↗
37. Characterization of asphalt mixture using technique X-ray computed tomography scan after freeze-thaw cycle and microwave heating10.1016/j.conbuildmat.2022.128435 ↗
38. Microwave heating of asphalt paving materials: Principles, current status and next steps10.1016/j.conbuildmat.2020.121993 ↗
39. Application of atomic force microscopy in bitumen materials at the nanoscale: A review10.1016/j.conbuildmat.2022.128059 ↗
40. Study on multiple Damage-Healing properties and mechanism of laboratory simulated recycled asphalt binders10.1016/j.conbuildmat.2022.128468 ↗
41. Assessment of self-healing asphalt pavement fatigue life using analytical Jc approach and laboratory results10.1016/j.conbuildmat.2021.124623 ↗
42. Fracture -healing properties of asphalt mixtures and microwave heating thermo-sensitivity analysis of their constituent materials10.1016/j.jclepro.2021.127763 ↗
43. Effect of palm oil capsules on the self-healing properties of aged and unaged asphalt mixtures gained by resting period and microwave heating10.1016/j.conbuildmat.2021.125901 ↗
44. Characterization of optimal healing efficiency based on a new nonlinear ultrasonic method for the process of gradient heating healing in asphalt mixture10.1016/j.ndteint.2022.102674 ↗
45. Microwave heating uniformity, road performance and internal void characteristics of steel slag asphalt mixtures10.1016/j.conbuildmat.2022.129155 ↗
46. Self-healing properties of asphalt concrete containing responsive calcium alginate/nano-Fe3O4 composite capsules via microwave irradiation10.1016/j.conbuildmat.2021.125258 ↗
47. A novel self-healing system: Towards a sustainable porous asphalt10.1016/j.jclepro.2020.120815 ↗
48. Self-healing of open cracks in asphalt mastic10.1016/j.fuel.2011.09.009 ↗
49. Experimental study of the performance of porous ultra-thin asphalt overlay10.1080/10298436.2020.1837826 ↗
50. Use of X-ray computed tomography to evaluate the gradual behaviour of air voids in asphalt mixtures during permanent deformation
51. Effects of freeze-thaw cycles on the internal voids structure of asphalt mixtures10.3390/ma15103560 ↗
52. Effect of freeze–thaw cycles on the void topologies and mechanical properties of asphalt10.1016/j.conbuildmat.2022.128085 ↗
53. JTG E20-2011 · 2011
54. JTG E42-2005. · 2005
55. Experimental investigation of basic oxygen furnace slag used as aggregate in asphalt mixture10.1016/j.jhazmat.2006.02.073 ↗
56. I.Z. Yildirim, Experimental study of the use of steel slag as a geotechnical material, Ph.D., n.d. https://www.proquest.com/pqdtglobal/docview/516303225.
57. A review of X-ray computed tomography of concrete and asphalt construction materials10.1016/j.conbuildmat.2018.12.049 ↗
58. S. Carmignato, W. Dewulf, R. Leach, eds., Industrial X-Ray Computed Tomography, Springer International Publishing, Cham, 2018. https://doi.org/10.1007/978-3-319-59573-3.10.1007/978-3-319-59573-3 ↗
59. Characterization and identification of asphalt mixtures based on Convolutional Neural Network methods using X-ray scanning images10.1016/j.conbuildmat.2018.04.083 ↗
60. Influence of warm mix additive on internal structure of dry process crumb rubber modified mixtures10.1016/j.jclepro.2021.127959 ↗
61. X-ray tomography to characterize air void distribution in superpave gyratory compacted specimens10.1080/10298430290029902a ↗
62. Fatigue damage evolution in asphalt mixture based on X-ray CT images10.1016/j.conbuildmat.2022.129242 ↗
63. Investigation of microscopic air void structure of anti-freezing asphalt pavement with X-ray CT and MIP10.1016/j.conbuildmat.2018.05.185 ↗
64. Characterization of interconnectivity, size distribution and uniformity of air voids in porous asphalt concrete using X-ray CT scanning images10.1016/j.conbuildmat.2019.04.056 ↗
65. Microstructure properties of cementitious mortars with selected additives for electromagnetic waves absorbing applications10.1016/j.cemconcomp.2022.104732 ↗
66. Transparent characterization of spatial-temporal evolution of gangue solid wastes’ void structures during compression based on CT scanning10.1016/j.powtec.2020.08.035 ↗