journal article·2023-05

Utilization of tricalcium aluminate as modifier on phosphogypsum-based full solid-waste cementitious material

Pian Chen, Baoguo Ma, Hongbo Tan, Zhouling Lv, Maogao Li, Lei Wu

Publisher page

Abstract

In this study, it was proposed to use tricalcium aluminate (C 3A) as modifier to promote the working performance, early strength and volume stability of phosphogypsum-based full solid-waste cementitious material (PSC). The PSC was composed of 60 % β-hemihydrate phosphogypsum (β-HPG), 30 % ground blast-furnace slag (BFS) and 10 % steel slag (SS). Fluidity, setting time, hydration process and phases and volume shrinkage rate were discussed, and the mechanism behind was revealed. The results showed that the addition of 0.5–4 % C 3A contributed to the transformation of the PSC from high fluid to fast molding by shortening the setting time of the PSC, increased both the early and late mechanical properties by optimizing hydration products and structures, and improved the volume stability by increasing the generation AFt and C-S-H gel. Especially when the C 3A content was 4 %, the 2 h compressive strength of the system reached 2 MPa, the 1 d compressive strength increased by 60 % and the 60 d compressive strength increased by 20 % compared with the blank group; the setting time of the system was shortened by about 1 h; the volume shrinkage rate of the system was reduced by about 50 %. Based on these changes of macroscopic properties, the hydration products and hydration process of the PSC were further analyzed by means of XRD, TG-DTG, thermal analysis of hydration, scanning electron microscope, etc. The influence mechanism of C 3A on the PSC was comprehensively discussed, and the environmental assessments were provided. The research content and results of this paper could provide a theoretical basis for the application of PSC in practical engineering.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications · Recycling and utilization of industrial and municipal waste in materials production

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Effect of mitigation technologies on the total cost and carbon dioxide emissions of a cement plant under multi-objective mixed linear programming optimisation10.1016/j.cherd.2022.07.048 ↗
2. Analysis of theoretical carbon dioxide emissions from cement production: Methodology and application10.1016/j.jclepro.2021.130270 ↗
3. Impact of the addition of oil-based mud on carbon dioxide emissions in a cement plant10.1016/j.jclepro.2015.06.062 ↗
4. Assessment of the engineering properties, carbon dioxide emission and economic of biomass recycled aggregate concrete: A novel approach for building green concretes10.1016/j.jclepro.2022.132780 ↗
5. Exploring solutions to achieve carbon neutrality in China: A comparative study of a large-scale passive House district and a Green building district in Qingdao10.1016/j.enbuild.2022.112224 ↗
6. Mechanical activation improves reactivity and reduces leaching of municipal solid waste incineration MSWI bottom ash in cement hydration system10.1016/j.jclepro.2022.132533 ↗
7. Solid waste-based magnesium phosphate cements: Preparation, performance and solidification/stabilization mechanism10.1016/j.conbuildmat.2021.123761 ↗
8. Synthesis of high belite sulfoaluminate cement with high volume of mixed solid wastes10.1016/j.cemconres.2022.106845 ↗
9. Investigation of environmentally friendly gypsum based composites with improved water resistance
10. Hydration and rheology of activated ultra-fine ground granulated blast furnace slag with carbide slag and anhydrous phosphogypsum
11. Study on fine-toned fly ash content for lightweight strain-hardening cementitious composites (LSHCC) with low fiber content
12. Mechanical activation of steel slag to prepare supplementary cementitious materials: A comparative research based on the particle size distribution, hydration, toxicity assessment and carbon dioxide emission
13. Rice husk ash and fly ash geopolymer hollow block based on NaOH activated
14. Application of secondary steel slag in subgrade: Performance evaluation and enhancement10.1016/j.jclepro.2018.01.172 ↗
15. Influencing factors of mechanical and thermal conductivity of foamed phosphogypsum-based composite cementitious materials
16. Enhancement of phosphogypsum mechanical block with the addition of iron and aluminum salts
17. Hydration reaction and microstructural characteristics of hemihydrate phosphogypsum with variable pH
18. Improving the mechanical property and water resistance of β-hemihydrate phosphogypsum by incorporating ground blast furnace slag and steel slag10.1016/j.conbuildmat.2022.128265 ↗
19. Investigation on phosphogypsum–steel slag -granulated blast-furnace slag–limestone cement10.1016/j.conbuildmat.2009.12.006 ↗
20. On-demand setting of extrusion-based 3D printing gypsum using a heat-induced accelerator10.1016/j.conbuildmat.2021.124624 ↗
21. Mix proportion of high-strength, roller-compacted, latex-modified rapid-set concrete for rapid road repair10.1016/j.conbuildmat.2010.11.085 ↗
22. Dissolution and early hydration of tricalcium aluminate in aqueous sulfate solutions10.1016/j.cemconres.2020.106191 ↗
23. Ultrahigh removal performance of lead from wastewater by tricalcium aluminate via precipitation combining flocculation with amorphous aluminum10.1016/j.jclepro.2019.118728 ↗
24. Hydration of tricalcium aluminate and gypsum pastes on the International Space Station
25. The role of sulfate ions in tricalcium aluminate hydration: New insights10.1016/j.cemconres.2020.105973 ↗
26. Effect of tricalcium aluminate and nano silica on performance of hemihydrate gypsum10.1016/j.conbuildmat.2022.126362 ↗
27. Effects of drying techniques on the crystal structure and morphology of ettringite10.1016/j.conbuildmat.2018.11.078 ↗
28. Synergy effect of synthetic ettringite modified by citric acid on the properties of ultrafine sulfoaluminat cement-based materials10.1016/j.cemconcomp.2021.104312 ↗
29. Effects of amorphous aluminum hydroxide on chloride immobilization in cement-based materials10.1016/j.conbuildmat.2019.117171 ↗
30. Utilization of barium slag to improve chloride-binding ability of cement-based material10.1016/j.jclepro.2020.124612 ↗
31. Effect of sulfate attack on the composition and micro-mechanical properties of C-A-S-H gel in cement-slag paste: A combined study of nanoindentation and SEM-EDS10.1016/j.conbuildmat.2022.128275 ↗
32. Effects of colloidal nano-SiO2 on the immobilization of chloride ions in cement-fly ash system10.1016/j.cemconcomp.2020.103596 ↗
33. Nano-silica and silica fume modified cement mortar used as Surface Protection Material to enhance the impermeability10.1016/j.cemconcomp.2018.05.012 ↗
34. Utilization of submicron autoclaved aerated concrete waste to prepare eco-friendly ultra-high performance concrete by replacing silica fume
35. Pore structure evaluation of cementing composites blended with coal by-products: Calcined coal gangue and coal fly ash10.1016/j.fuproc.2018.09.013 ↗
36. Investigation on phosphogypsum–steel slag–granulated blast-furnace slag–limestone cement10.1016/j.conbuildmat.2009.12.006 ↗
37. The reactive products and reactivity of modified red mud and ground granulated blast furnace slag at different alkalinities
38. Effect of ultrafine slag on hydration heat and rheology properties of Portland cement paste10.1016/j.powtec.2022.117549 ↗
39. Mechanical, microstructure and reaction process of calcium carbide slag-waste red brick powder based alkali-activated materials (CWAAMs)
40. Mechanical activation of steel slag to prepare supplementary cementitious materials: A comparative research based on the particle size distribution, hydration, toxicity assessment and carbon dioxide emissio
41. Effect of organic alkali on hydration of GGBS-FA blended cementitious material activated by sodium carbonate10.1016/j.ceramint.2021.09.240 ↗
42. Y. Runzhang, Cementitious Material Science, 1996.