journal article·2023-07

Recycled brick powder from construction and demolition waste as waterborne coating filler with robust scrubbing resistance

Bo Chen, Yi Zheng, Youcai Zhao, Yan Wang, Tao Zhou

Publisher page

Abstract

During the daily use of waterborne coatings, it was unavoidable to be scratched so that it was required to have the property of scrubbing resistance. This study explored the use of recycled red bricks as a substitute filler for waterborne coatings. The prepared red brick powder (RBP) waterborne coating exhibited exceptional scrubbing resistance, with a maximum resistance of over 9000 times, which was approximately 4.5 times higher than the national standard in China. The addition of pigment volume concentration (PVC) between 40 ∼ 53% significantly improved the coating’s performance. The use of RBP as a coating framework also enhanced the coating’s hardness, which was found to be 85–103 times better than that of commercial coatings (75–90 times). Moreover, the water absorption of RBP waterborne coating was only 14.4%, which is significantly lower than that of commercial coatings (25.2–32.0%). These two key factors, low water absorption and high hardness, were found to be crucial in improving the scrubbing resistance of coatings. The incorporation of emulsion, such as styrene acrylic, further improved the compactness of coating, by strengthening the benefits of the good hardness and low water absorption. The use of construction and demolition waste as a resource for waterborne coating would be a green and efficient way to eliminate massive land resource occupation and potential environmental risks.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Recycled Aggregate Concrete Performance · Concrete and Cement Materials Research · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Developing efficient circularity for construction and demolition waste management in fast emerging economies: lessons learned from Shenzhen, China[J]10.1016/j.scitotenv.2020.138264 ↗
2. Managerial areas of construction and demolition waste: a scientometric review.[J]
3. Rheological properties and compressive strength of construction and demolition waste-based geopolymer mortars for 3D-Printing[J]10.1016/j.conbuildmat.2022.127114 ↗
4. Pervious concrete with secondarily recycled low-quality brick-concrete demolition residue: Engineering performances, multi-scale/phase structure and sustainability[J]10.1016/j.jclepro.2022.130929 ↗
5. Improving construction and demolition waste collection service in an urban area using a simheuristic approach: a case study in Sydney, Australia[J]10.1016/j.jclepro.2020.124138 ↗
6. Key policies to the development of construction and demolition waste recycling industry in China[J]10.1016/j.wasman.2020.04.016 ↗
7. Willingness to pay for higher construction waste landfill charge: A comparative study in Shenzhen and Qingdao, China[J]10.1016/j.wasman.2018.09.043 ↗
8. The research summary for construction waste recycled aggregate concrete[J]
9. Minimizing the increasing solid waste through zero waste strategy[J]10.1016/j.jclepro.2014.08.027 ↗
10. Enlightenment of Japan’s construction and demolition waste reclamation to China[J]
11. Recycling of construction debris as aggregate in the Mid-Atlantic Region, USA[J]10.1016/j.resconrec.2004.04.006 ↗
12. Zhang · 2015
13. Self-compacting concrete with recycled aggregates - a literature review[J]10.1016/j.jobe.2019.01.001 ↗
14. Evaluation of an experimental mix proportion study and production of concrete using fine recycled aggregate[J]
15. Physico-mechanical properties of multi-recycled self-compacting concrete prepared with precast concrete rejects[J]10.1016/j.conbuildmat.2017.07.087 ↗
16. Management of construction and demolished waste as an aggregate substitute in cement concrete[J]10.9734/ijecc/2021/v11i530415 ↗
17. Demolition waste generation and recycling potentials in a rapidly developing flagship megacity of South China: prospective scenarios and implications[J]10.1016/j.conbuildmat.2016.03.130 ↗
18. Experimental development of low cement content and recycled construction and demolition waste aggregates concrete[J]10.1016/j.conbuildmat.2020.121680 ↗
19. Separation studies of concrete and brick from construction and demolition waste[J]10.1016/j.wasman.2019.01.007 ↗
20. Value-added recycling of construction waste wood into noise and thermal insulating cement-bonded particleboards[J]10.1016/j.conbuildmat.2016.08.053 ↗
21. Study on utilization of red brick waste powder in the production of cement-based red decorative plaster for walls[J]10.1016/j.jclepro.2016.05.149 ↗
22. Study on the application of waste bricks in emulsified oil-water separation[J]10.1016/j.jclepro.2019.119609 ↗
23. Suspension stability of waterborne coating slurry prepared using construction and demolition waste[J]10.1016/j.conbuildmat.2018.12.108 ↗
24. GB/T 9266-2009. Determination of scrub resistance of film of architectural paints and coatings[S]. China.
25. Coatings for buildings[J]10.1533/9781855737006.330 ↗
26. Key issues in the formulation of marine antifouling paints[J]10.1533/9781845696313.2.308 ↗
27. GB/T 1730-2007. Paints and varnishes-Pendulum damping test[S]. China.
28. GB/T 1720-2020. Circle-drawing test of coating films[S]. China.
29. HG/T 334-2012. Water absorption Determination of water absorption of paint film[S]. China.
30. Water permeability of pigmented waterborne coatings[J]10.1016/j.porgcoat.2012.08.011 ↗
31. JG/T 512-2017. General technical requirements for building exterior wall coating system [S]. China.
32. Effect of precipitated calcium carbonate additions on waterborne paints at different pigment volume concentrations[J]10.1016/j.porgcoat.2015.02.003 ↗