journal article·2023-07

Thermal and structural properties of cement mortar embedded with hybrid nanocomposite based phase change nanocapsules for building application

G. Naveen Kumar, V. Vinayaka Ram, R. Parameshwaran

Publisher page

Abstract

A novel Cu-TiO 2 Hybrid Nanocomposites adsorbed Nanoencapsulated Phase Change Material (HNNP) was developed. The current research work aims to develop PCM-based cement mortar used as plastering material with increased Energy Utilization Efficiency. The work addresses the poor thermal conductivity of the polymer based shell material (melamine) by adsorbing Cu-TiO 2 hybrid nanocomposites on the nanocapsule (HN). The HNNP capsules are capable of freezing and melting at a temperature of 24.02 °C and 25.76 °C, with latent heat of 146.71 J/g and 144.46 J/g respectively. The phase change temperatures of HNNP are in the human comfort temperature zone. The adsorption of HN over nanoencapsulated PCM (NP) has greatly enhanced the thermal conductivity by 137.19% over NP. The HNNP exhibited excellent thermal stability and thermal reliability. Furthermore, the behaviour of the cement mortar in terms of thermal conductivity and compressive strength was studied by dispersing NP and the HNNP capsules. The maximum inclusion of HNNP in the cement mortar greatly enhanced its thermal conductivity, whereas the behaviour of cement mortar with NP inclusion, was contrary, resulting in reduced thermal conductivity. The compressive strength was reduced with the increased percentage of both NP and HNNP capsules in the cement mortar. Albeit, the compressive strength was reduced due to the maximum inclusion of NP and HNNP in the cement mortar, the resulted compressive strength is acceptable for plastering material. From the above stated results, the HNNP is a viable candidate, having a great potential for cooling needs in buildings.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Phase Change Materials Research · Flame retardant materials and properties · Adsorption and Cooling Systems

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (95)

Show source-provided references
1. IEA · 2022
2. Investigating the influence of maintenance strategies on building energy performance: A systematic literature review10.1016/j.egyr.2022.10.441 ↗
3. Present and future energy consumption of buildings: challenges and opportunities towards decarbonisation10.1016/j.prime.2021.100002 ↗
4. Modeste Kameni Nematchou, Andrianaharison Yvon, Sambatra Eric Jean Roy, Christian Guy Ralijaona, Ramaroson Mamiharijaona, Jean Nirinarison Razafinjaka, Raoelivololona Tefy, A review on energy consumption in the residential and commercial buildings located in tropical regions of Indian Ocean: a case of Madagascar island, J. Energy Storage 24 (2019) 100748.10.1016/j.est.2019.04.022 ↗
5. Z. Pezeshki, A. Soleimani, A. Darabi, S.M. Mazinani, Thermal transport in: Building materials. Construction and Building Materials, 181(2018) 238–252.10.1016/j.conbuildmat.2018.05.230 ↗
6. Energy efficiency in sustainable buildings: a systematic review with taxonomy, challenges, motivations, methodological aspects, recommendations, and pathways for future research10.1016/j.esr.2022.101013 ↗
7. A systematic review of strategies for overcoming the barriers to energy-efficient technologies in buildings10.1016/j.erss.2017.03.010 ↗
8. An energy culture maturity conceptual framework on adopting energy-efficient technology innovations in buildings
9. A review of optimization techniques application for building performance analysis10.28991/CEJ-2022-08-04-014 ↗
10. Sustainable thermal energy storage technologies for buildings: a review10.1016/j.rser.2012.01.058 ↗
11. Thermal energy storage using phase change materials in building applications: a review of the recent development10.1016/j.enbuild.2023.112908 ↗
12. Gang Li, Energy and exergy performance assessments for latent heat thermal energy storage systems, Renewable and Sustainable Energy Reviews, November (2015) 926-954.10.1016/j.rser.2015.06.052 ↗
13. Incorporation of phase change materials into building envelope for thermal comfort and energy saving: a comprehensive analysis
14. Experimental studies on the applications of PCMs and nano-PCMs in buildings: a critical review10.1016/j.enbuild.2017.08.037 ↗
15. X. Huang, X. Chen, A. Li, D. Atinafu, H. Gao, W. Dong, G.e. Wang, Shape-stabilized phase change materials based on porous supports for thermal energy storage applications, Chem. Eng. J., 356 (2019) 641–661.10.1016/j.cej.2018.09.013 ↗
16. A novel bifunctional microencapsulated phase change material loaded with ZnO for thermal energy storage and light–thermal energy conversion10.1039/D0SE00718H ↗
17. G.H. Zhang a, S.A.F. Bon b, C.Y. Zhao, Synthesis, characterization and thermal properties of novel nanoencapsulated phase change materials for thermal energy storage, Solar Energy, 86 (2012) 1149–1154.10.1016/j.solener.2012.01.003 ↗
18. Waste materials as the potential phase change material substitute in thermal energy storage system: a review
19. S.S. Magendran, F.S.A. Khan, N.M. Mubarak, M. Vaka, R. Walvekar, E.C. Mohammad Khalid, S.N. Abdullah, R.R. Karri, Synthesis of organic phase change materials (PCM) for energy storage applications: A review, Nano-Structures & Nano-Objects 20 (2019) 100399.10.1016/j.nanoso.2019.100399 ↗
20. Study on thermal storage properties of hybrid nanocomposite-dibasicester as phase change material10.1016/j.tca.2013.08.028 ↗
21. Anomalous thermal conduction characteristics of phase change composites with single-walled carbon nanotube inclusions10.1021/jp4046512 ↗
22. Description of phase change materials (PCMs) used in buildings under various climates: a review
23. Xiang sheng Chen, Cementitious composites integrated phase change materials for passive buildings: an overview
24. Building bricks with phase change material (PCM): Thermal performances10.1016/j.conbuildmat.2020.121315 ↗
25. Experimental analysis of hybrid nanocomposite-phase change material embedded cement mortar for thermal energy storage
26. Influence of the incorporation of phase change materials on temperature development in mortar at early ages: experiments and numerical simulation10.1016/j.conbuildmat.2019.08.028 ↗
27. Effect of temperature on mortars with incorporation of phase change materials10.1016/j.conbuildmat.2015.08.077 ↗
28. Thermal and mechanical properties of mortar incorporated with paraffin/palm oil fuel ash composite
29. Characterization of innovative mortars with direct incorporation of phase change materials
30. Thermal behavior of cement mortar embedded with low-phase transition temperature PCM10.1016/j.conbuildmat.2020.119168 ↗
31. Vicente Zetola, Luis J. Claros-Marfil, Alfonso García Santos, Fco. Javier Neila Gonzalez, Effect of Paraffin and Silica Matrix Phase Change Materials on Properties of Portland Cement Mortars, 14 (2021) 921.10.3390/ma14040921 ↗
32. Nanoencapsulation of phase change materials for advanced thermal energy storage systems10.1039/C8CS00099A ↗
33. A review on effect of phase change material encapsulation on the thermal performance of a system10.1016/j.rser.2012.05.037 ↗
34. Effects of parameters of the shell formation process on the performance of microencapsulated phase change materials based on melamine-formaldehyde
35. Microcapsules of n-dodecanoic acid/melamine-formaldehyde with enhanced thermal energy storage capability for solar applications
36. Toughening of melamine –formaldehyde foams and advanced applications based on functional design10.1016/j.jiec.2022.11.069 ↗
37. A review of recent progress in melamine-formaldehyde resin based nanocomposites as coating materials
38. Microencapsulation of a fatty acid with Poly(melamine–urea–formaldehyde)10.1016/j.enconman.2014.01.042 ↗
39. Recent developments in flame retardant polymeric coatings10.1016/j.porgcoat.2013.07.014 ↗
40. Bio-based flame retardants: when nature meets fire protection10.1016/j.mser.2017.04.001 ↗
41. G. Naveen Kumar, Bader Al-Aifan, R. Parameshwaran, V. Vinayaka Ram, Facile synthesis of microencapsulated 1-dodecanol/melamine-formaldehyde phase change material using in-situ polymerization for thermal energy storage, Colloids and Surfaces A: Physicochemical and Engineering Aspects 610 (2021) 125698.10.1016/j.colsurfa.2020.125698 ↗
42. Preparation and physicochemical properties of microcapsules containing phase-change material with graphene/organic hybrid structure shells10.1039/C7TA06980D ↗
43. Microencapsulation of phase change materials with polystyrene/cellulose nanocrystal hybrid shell via pickering emulsion polymerization, acs sustain
44. J. Giro-Paloma, C. Barreneche, M. Martínez, B. ˇSumiga, A.I. Ferńandez, L. F. Cabeza, Mechanical response evaluation of microcapsules from different slurries, Renew. Energ. 85 (2016) 732–739.10.1016/j.renene.2015.07.033 ↗
45. Novel microstructured polyol–polystyrene composites for seasonal heat storage10.1016/j.apenergy.2016.03.023 ↗
46. K.V.L.N. Raju, G. Naveen Kumar, V. Vinayaka Ram, R. Parameshwaran, Preparation, thermal and structural properties of n-octadecane/melamine formaldehyde nanocapsules embedded cement mortar for energy storage application in buildings.
47. Ana Vaz Sa, Miguel Azenha, Hipólito de Sousa, António Samagaio, Thermal enhancement of plastering mortars with Phase Change Materials: experimental and numerical approach, Energy Build. 49 (2012) 16–27.10.1016/j.enbuild.2012.02.031 ↗
48. Cryogenic conditioning of microencapsulated phase change material for thermal energy storage10.1038/s41598-020-75494-8 ↗
49. Preparation and properties of graphene oxide-modified Poly(melamine-formaldehyde) microcapsules containing phase change materials n-dodecanol for thermal energy storage10.1039/C5TA01852H ↗
50. Nanoencapsulated n-tetradecane phase change materials with melamine–urea–formaldehyde–TiO2 hybrid shell for cold energy storage
51. Hongzhi Cui, Wenyu Liao, Xuming Mi, TommyY. Lo, Dazhu Chen, Study on functional and mechanical properties of cement mortar with graphite-modified microencapsulated phase-change materials, Energy Build., Volume 105, 15 October (2015) 273-284.10.1016/j.enbuild.2015.07.043 ↗
52. Enhanced mechanical properties and thermal conductivity of paraffin microcapsules shelled by hydrophobic-silicon carbide modified melamine-formaldehyde resin
53. Thermal stability of composite phase change material microcapsules incorporated with silver nano-particles
54. Microencapsulation of phase change materials with carbon nanotubes reinforced shell for enhancement of thermal conductivity
55. Titanium dioxide nanoparticle-decorated polymer microcapsules enclosing phase change material for thermal energy storage and photocatalysis10.1021/acsapm.0c01410 ↗
56. A novel method for the preparation of narrow-disperse nanoencapsulated phase change materials by phase inversion emulsification and suspension polymerization10.1021/acs.iecr.5b01026 ↗
57. Ag-polymer composite microspheres with patterned surface structures10.1007/s00396-007-1737-2 ↗
58. Wei Li,Xing-Xiang Zhang, Xue-Chen Wang,Jian-Jin Niu, Preparation and characterization of microencapsulated phase change material with low remnant formaldehyde content, Materials Chemistry and Physics, (2007) 437-442.10.1016/j.matchemphys.2007.06.030 ↗
59. Mohammed Muneer Meera Sahib, Surumi Rasia Salim, Influence of Fiber Hybridization on Strength and Toughness of RC Beams, Civ. Eng. J., (2022) 2476-3055.10.28991/CEJ-2022-08-03-010 ↗
60. Multiphysics analysis of effects of encapsulated phase change materials (PCMs) in cement mortars10.1016/j.cemconres.2019.02.002 ↗
61. Effect of addition of alccofine on the compressive strength of cement mortar cubes
62. Rheological Behaviour of WMA-modified asphalt binders with crumb rubber10.3390/polym14194148 ↗
63. Analysis of the properties of modified asphalt binder by FTIR method10.3390/ma15165743 ↗
64. Characterization of silver nanoparticles synthesized on titanium dioxide fine particles10.1088/0957-4484/19/6/065711 ↗
65. Experimental investigation on convective heat transfer and rheological characteristics of Cu–TiO2 hybrid nanofluids10.1016/j.expthermflusci.2013.08.026 ↗
66. Preparation and characterization of hybrid nanocomposite embedded organic methyl ester as phase change material10.1016/j.solmat.2017.06.031 ↗
67. Preparation and thermal performance of polystyrene/n-tetradecane composite nanoencapsulated cold energy storage phase change materials10.1016/j.enconman.2013.07.060 ↗
68. Nano-encapsulated phase change materials prepared by one-step interfacial polymerization for thermal energy storage10.1016/j.matchemphys.2019.04.032 ↗
69. Preparation and characterization of novel nanoencapsulated phase change materials10.1016/j.enconman.2008.06.027 ↗
70. Ultrasonic synthesis and characterization of polystyrene/n-dotriacontane composite nanoencapsulated phase change material for thermal energy storage10.1016/j.apenergy.2014.06.056 ↗
71. Nano-encapsulated organic phase change material based on copolymer nanocomposites for thermal energy storage10.1016/j.energy.2014.01.033 ↗
72. Xuezhen Wang, Lecheng Zhang, Yi-Hsien Yu, Lisi Jia, M. Sam Mannan, Ying Chen, Zheng dong Cheng, Nano-encapsulated PCM via pickering emulsification, Scientific Reports 5 (2015)13357.10.1038/srep13357 ↗
73. The stability and thermophysical properties of a thermal fluid containing surface-functionalized nanoencapsulated PCM10.1016/j.tca.2019.178406 ↗
74. Synthesis and thermal properties of nanoencapsulation of paraffin as phase change material for latent heat thermal energy storage10.1016/j.enbenv.2020.04.003 ↗
75. Hussain H. Alzoubi, Borhan Albiss, Shatha S. Abu sini, Performance of cementitious composites with nano PCMs and cellulose nano fibers, Constr. Build. Mater. 236 (2020) 117483.10.1016/j.conbuildmat.2019.117483 ↗
76. Ultraviolet ageing of bituminous materials: A comprehensive literature review from 2011 to 202210.1016/j.conbuildmat.2022.128889 ↗
77. Tumirah Khadiran, Mohd Zobir Hussein, Hashim Wan Syamsi, Zulkarnain Zainal, Rafeadah Rusli, Laboratory-scale studies on smart gypsum composite boards incorporated with nano-encapsulated organic phase change material for thermal comfort building application, J. Mater. Civil Eng., 28 (2015) 04015137.10.1061/(ASCE)MT.1943-5533.0001394 ↗
78. Jiaji Cheng, Yue Zhou, Dan Ma, Shaoxiang Li, Feng Zhang, Yu Guan a, Wenjuan Qu, Yang Jin, Dong Wang, Preparation and characterization of carbon nanotube microcapsule phase change materials for improving thermal comfort level of buildings, Constr. Build. Mater. 244 (2020) 118388.10.1016/j.conbuildmat.2020.118388 ↗
79. Micro/nanoencapsulation of dimethyl adipate with melamine formaldehyde shell as phase change material slurries for cool thermal energy storage10.1016/j.ctta.2022.100037 ↗
80. Fabrication and thermal properties of MicroPCMs: used melamine-formaldehyde resin as shell material10.1002/app.23151 ↗
81. Melamine-formaldehyde microencapsulated n-Tetracosane phase change material for solar thermal energy storage in coating10.1016/j.solmat.2020.110676 ↗
82. Encapsulation of phase change material with water-absorbable shell for thermal energy storage10.1021/acssuschemeng.5b00807 ↗
83. Fabrication and properties of microencapsulated paraffin@SiO2 phase change composite for thermal energy storage10.1021/sc300082m ↗
84. New approach for sol-gel synthesis of microencapsulated n-octadecane phase change material with silica wall using sodium silicate precursor10.1016/j.energy.2013.11.088 ↗
85. Silica encapsulation of n-octadecane via sol–gel process: A novel microencapsulated phase-change material with enhanced thermal conductivity and performance10.1016/j.jcis.2009.11.036 ↗
86. Enhancement of the thermal performance of the paraffin-based microcapsules intended for textile applications10.3390/polym13071120 ↗
87. Nihal sarier, Emel onder, Gokcen ukuser, Silver incorporated microencapsulation of n-hexadecane and n-octadecane appropriate for dynamic thermal management in textiles, Thermochim. Acta, 613 (2015) 17–27.10.1016/j.tca.2015.05.015 ↗
88. Fabrication and characterization of poly(melamine-formaldehyde)/silicon carbide hybrid microencapsulated phase change materials with enhanced thermal conductivity and light-heat performance10.1016/j.solmat.2018.03.019 ↗
89. Single layer mortars with microencapsulated PCM: Study of physical and thermal properties, and fire behavior10.1016/j.enbuild.2015.11.028 ↗
90. Properties of cementitious mortar and concrete containing micro-encapsulated phase change materials10.1016/j.conbuildmat.2016.05.116 ↗
91. Rodrigo Alves Silva, Paulo de Castro Guetti, Mário Sergio da Luz, Francisco Rouxinol, Rogério Valentim Gelamo, Enhanced properties of cement mortars with multilayer graphene nanoparticles, Constr. Build. Mater. 149 (2017) 378–385.10.1016/j.conbuildmat.2017.05.146 ↗
92. Influence of nanoparticles on fluidity and mechanical properties of cement mortar10.1016/j.conbuildmat.2015.10.149 ↗
93. Lubinda F. Walubita, Gilberto Martinez-Arguelles 2, Rodrigo Polo-Mendoza, Sang Ick-Lee, Luis Fuentes, Comparative Environmental Assessment of Rigid, Flexible, and Perpetual Pavements: A Case Study of Texas, Sustainability, 2022, 14, 9983.10.3390/su14169983 ↗
94. Rodrigo Polo-Mendoza, Gilberto Martinez-Arguelles, Rita Penabaena-Niebles, A multi-objective optimization based on genetic algorithms for the sustainable design of Warm Mix Asphalt (WMA), doi: 10.1080/10298436.2022.2074417.10.1080/10298436.2022.2074417 ↗
95. Rodrigo Polo-Mendoza, Rita Penabaena-Niebles, Filippo Giustozzi, Gilberto Martinez- Arguelles, Eco-friendly design of Warm mix asphalt (WMA) with recycled concrete aggregate (RCA): A case study from a developing country, Constr. Build. Mater., 326 (2022) 126890.10.1016/j.conbuildmat.2022.126890 ↗