Mechanical, environmental, and economic assessment of sustainable cement mortar using Afghan natural pozzolan as a partial replacement for cement
Source abstract
Abstract
Using natural pozzolan to produce cement-based mortar is one of the suitable solutions to reduce cost, energy consumption, and environmental impacts. In this experimental study, the paste replacement methodology (replacement of partial cement wt% with supplementary cementitious material) is used. Natural pozzolan, as vernacular material with high silicate aluminate originating in Afghanistan, is replaced (6, 13, and 20%) with cement in mortar. Various tests such as slump, compressive strength, tensile strength, water absorption, freezing-thawing cycles, relative length change, pull-off test, and microstructure analysis have been performed to study the properties of fresh and hardened mortar. The findings showed that the use of natural pozzolan containing a high level of silicate and aluminate as a replacement of cement in mortar improved 56 days compressive and tensile strength of mortar by 2.2 and 6%, respectively, water absorption was reduced by 1.6%, and the resistance to the freezing and thawing cycles was increased 10.7% as well compared to the reference samples. In addition, the results of economic analysis and sustainable development indicators assessment of mortar showed that using this replacement methodology was economically acceptable and reduced the potential of global warming and energy consumption by 13% of the production of one ton of cement using standard technology. The optimum replacement percentage was selected at 13% without compromising the mechanical properties of mortar.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Building materials and conservation · Recycling and utilization of industrial and municipal waste in materials production
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (60)
Show source-provided references
1. Greenhouse Effect: Greenhouse Gases and Their Impact on Global Warming10.9734/JSRR/2017/39630 ↗
2. https://www.epa.gov/ghgemissions/sources-greenhouse-gas-emissions, accessed (2019) Sources of Greenhouse Gas Emissions, the United States Environmental Protection Agency (USEPA).
3. Assadi. N, Environmental Impacts of Cement Production with LCA : A Case Study on Ghori Cement Plant in Afghanistan” Master Thesis, Graduate School of International Resource Sciences, University of Akita, Japan. (2020).
4. Show. K.Y, Tay. J.H, Lee. D.J, Sustainable Sludge Management Resource Recovery for Construction Applications, Hohai University, China, (2018). 10.1142/10938.10.1142/10938 ↗
5. World Meteorological Organisation (WMO), State of the global climate: provisional report, (2020).
6. Lehne. J, Preston. F, Making Concrete Change: Innovation in Low-carbon Cement and Concrete, Chatham House. (2018), Retrieved from https://www.chathamhouse.org/2018/06/making-concrete-change-innovation-low-carbon-cement-and-concrete.
7. Green building education services, Green associate exam preparation study guide, (2009), LEED v4 edition.
8. Production of sustainable green mortar by ultrahigh utilization of fly ash: Technical, economic and environmental assessment”10.1016/j.conbuildmat.2021.122617 ↗
9. G, Quality and durability properties and life -cycle assessment of high volume biomass fly ash mortar10.1016/j.conbuildmat.2018.11.173 ↗
10. Sobolev. K, Kozhukhova. M, Sideris. K, Menéndez. E, Santhanam. M, Alternative supplementary cementitious materials: In Properties of Fresh and Hardened Concrete Containing Supplementary Cementitious Materials Springer, (2018), vol 01, (pp. 233-282), dio: 10.1007/978-3-319-70606-1_7.10.1007/978-3-319-70606-1_7 ↗
11. Mechanical and microstructural characteristics of geopolymer paste, mortar, and concrete containing local zeolite and slag activated by sodium carbonate
12. ASTM C 311-02, Standard Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use in Portland-Cement Concrete, ASTM International. West Conshohocken, Pennsylvania 19428-2959, United States, 2002.
13. Performance of Green Mortar Made From Locally Available Waste Tiles and silica fume
14. Effect of metakaolin substitution on physical mechanical and hydration process of White Portland cement10.1016/j.conbuildmat.2015.07.125 ↗
15. Resistance improvement of cement mortar containing silica fume to external sulfate attacks at normal temperature10.1016/j.conbuildmat.2020.119630 ↗
16. Effect of fineness and replacement ratio of ground fly ash on properties of blended cement mortar10.1016/j.conbuildmat.2018.05.060 ↗
17. Utilization of pumice powder and glass microspheres in cement mortar using paste replacement methodology10.1016/j.conbuildmat.2021.122691 ↗
18. Lightweight natural pumice composites for rehabilitation of historical buildings and landscape works
19. Influence of various bentonites on the mechanical properties and impermeability of cement mortars
20. Effects of bentonite on pore structure and permeability of cement mortar10.1016/j.conbuildmat.2019.07.073 ↗
21. The effects of kaolin and calcined kaolin on the durability and mechanical properties of self-compacting mortars subjected to high temperatures10.1016/j.conbuildmat.2020.120300 ↗
22. Improving the Properties of Self-compacted Concrete with Using Combined Silica Fume and Metakaolin
23. An experimental investigation into the mechanical performance and microstructure of cementitious mortars containing recycled waste materials subjected to various environments
24. ASTM C150, Standard Specification for Portland Cement, ASTM International, West Conshohocken, PA 19428-2959, United State., 2018.
25. ASTM C 618-12a, Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete, ASTM International. West Conshohocken, Pennsylvania 19428-2959, United States, 2012.
26. ASTM C778-17, Standard Specification for Sand, ASTM International, West Conshohocken, PA 19428-2959, United States., 2017.
27. ASTM C 192/C 192M-02, Standard Specification for Making and Curing Concrete Test Specimens in the Laboratory, ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United State., 2002.
28. ASTM C 143/C 143M-03, Standard Specification for Slump of Hydraulic-Cement Concrete, ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United State., 2003.
29. ASTM C 191-04, Standard Specification for Time of Setting of Hydraulic Cement by Vicat Needle, ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United State., 2004.
30. ASTM C 109/C 109M-02, Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens), ASTM International. West Conshohocken, Pennsylvania 19428-2959, United States, 2002.
31. ASTMC 496/496M-16, Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens, ASTM International, West Conshohocken, PA, 2017. 10.1520/C0496_C0496M-17.
32. ASTM C 78-02, Standard Specification for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading), ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United State., 2002.
33. ASTM C 642, Standard Test Method for Density, Absorption, and Voids in Hardened Concrete, American Society for Testing and Materials, 2013.
34. ASTM C 666/C 666M-03, Standard Specification for Resistance of Concrete to Rapid Freezing and Thawing, ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United State., 2003.
35. ASTM C 157/C 157M-03, Standard Specification for Length Change of Hardened Hydraulic-Cement Mortar and Concrete, ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United State., 2003.
36. ASTM C 1583-04, Standard Specification for Tensile Strength of Concrete Surfaces and the Bond Strength or Tensile Strength of Concrete Repair and Overlay Materials by Direct Tension (Pull-off Method), ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United State., 2004.
37. ASTM D 6052-03, Standard Specification for Preparation and Elemental Analysis of Liquid Hazardous Waste by Energy-Dispersive X-Ray Fluorescence, ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United State., 2003.
38. International Organization for Standardization (ISO), Environmental management Life cycle assessment Principles and framework, vol. 14040:2006, (2016).
39. International Organization for Standardization (ISO), Environmental management Life cycle assessment Requirements and guidelines, vol. 14044:2006, (2016).
40. Environmental impact and life cycle assessment (LCA) of traditional and ‘green’ concretes: Literature review and theoretical calculations10.1016/j.cemconcomp.2012.01.004 ↗
41. Influence of supplementary cementitious materials on the sustainability parameters of cement and concretes in the Indian context
42. PCA, American's Cement Manufacturer, Environmental Product Declaration, Portland Cement, pp. 1–11, 2016. www.cement.org/epd.
43. Life cycle assessment of eco-friendly concrete mixtures incorporating natural zeolite in sulfate-aggressive environment10.1016/j.conbuildmat.2020.121136 ↗
44. Intergovernmental Panel on Climate Change. Climate Change – The Physical Science Basis: Working Group I Contribution to the Fifth Assessment Report of the Intergovernmental Panel on Climate Change 2013 Cambridge University Press Cambridge 10.1017/CBO9781107415324.
45. Compound utilization of construction and industrial waste as a cementitious recycled powder in mortar
46. Influence of calcined coal-series kaolin fineness on properties of cement paste and mortar10.1016/j.conbuildmat.2018.03.117 ↗
47. Mehta · 2014
48. Properties of binary and ternary blended cement mortars containing palm oil fuel ash and metakaolin
49. Mechanical properties and durability performance of fly ash based mortar containing nano- and micro-silica additives10.1016/j.conbuildmat.2020.119121 ↗
50. Effect of nano-silica on mechanical properties and durability of self-compacting mortar containing natural zeolite: Experimental investigations and artificial neural network modeling
51. A, Cement Replacement Materials, Properties, Durability
52. Sharifi, Y, Mechanical and microstructural properties of mortars incorporating ceramic waste powder exposed to the hydrochloric acid solution
53. Li. L.G, Zhuo. Z.Y, Zhu.J, Kwan. A.K.H, Adding ceramic polishing waste as paste substitute to improve sulphate and shrinkage resistances of mortar, Powder Technology .Vol 362, (2020), Pages 149-156 2019, 10.1016/j.powtec.2019.11.117.10.1016/j.powtec.2019.11.117 ↗
54. Treatment with nano-silica and bacteria to restore the reduced bond strength between concrete and repair mortar caused by aggressive removal techniques10.1016/j.cemconcomp.2021.104064 ↗
55. Failure mechanisms of repair mortar stone interface assessed by pull-off strength tests10.1007/s10064-016-0964-5 ↗
56. Contribution of the Blast Furnace Slag on the Behavior of HPC in a Hydrochloric Environment
57. De Belie. N, Soutsos. M, Gruyaert. E. Properties of Fresh and Hardened Concrete Containing Supplementary Cementitious Materials: RILEM State-of-the-Art Reports book series (RILEM State Art Reports, volume 25) 10.1007/978-3-319-70606-1_3.
58. Mechanical properties, durability, and life-cycle assessment of self-consolidating concrete mixtures made with blended Portland cements containing fly ash and limestone powder10.1016/j.cemconcomp.2014.11.003 ↗
59. Yu, J, Meshra. D. K, Hu. C, Leung. C.K.Y, Shah. S. P, Resources Conservation & Recycling Mechanical , environmental and economic performance of sustainable Grade 45 concrete with ultrahigh-volume Limestone-Calcined Clay (LCC), Resour. Conserv. Recycl. (2021), vol. 175, p. 105846, 10.1016/j.resconrec.2021.105846.10.1016/j.resconrec.2021.105846 ↗
60. Sullivan. W. G, Wicks. E. M, Koelling. C. P, Engineering Economy, by Pearson Higher Education, Inc. (2015), 16th ed. New York.