Assessment of sustainable eco-processed pozzolan (EPP) from palm oil industry as a fly ash replacement in geopolymer concrete
Source abstract
Abstract
This research focusses on the feasibility of using eco-processed pozzolan (EPP), a palm oil industrial by-product, as partial replacement for fly ash (FA) in the geopolymer concrete (GPC); in addition, the effect of another palm oil industrial by-product, palm oil clinker (POC) as the lightweight coarse aggregate in the EPP-based GPC was also investigated. The ratios of alkaline activator to binder and sodium silicate to sodium hydroxide were kept constant, and the specimens were cured at 60 °C for 24 h. The mechanical properties, namely compressive, splitting tensile and flexural strengths, and modulus of elasticity (MOE) were investigated; further, microstructural analyses such as SEM, XRD and EDX were conducted. The test results show that the utilisation of 10–30% of EPP as FA replacement produced the compressive strengths in the range of 28–39 MPa. The splitting tensile strength of both the lightweight (LW) and normal weight (NW) GPC, except for M6 containing 30% of EPP substitution, fulfilled the minimum requirement of 2.0 MPa. In addition, the flexural strength of GPC produced about 12% of the respective compressive strength. The lower MOE of LW GPC compared to the NW GPC is attributed to the lower stiffness and specific gravity of POC aggregates. The XRD analysis shows the evidence of geopolymerization products of quartz, sillimanite, magnetite, and almandine.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Concrete Corrosion and Durability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (58)
Show source-provided references
1. Eco-efficient cements: Potential economically viable solutions for a low-CO2 cement-based materials industry10.1016/j.cemconres.2018.03.015 ↗
2. A. M. Alnahhal, U. J. Alengaram, S. Yusoff, P. Darvish, K. Srinivas, and M. Sumesh, “Engineering performance of sustainable geopolymer foamed and non-foamed concretes,” Constr. Build. Mater., vol. 316, no. October 2021, p. 125601, 2022, doi: 10.1016/j.conbuildmat.2021.125601.10.1016/j.conbuildmat.2021.125601 ↗
3. A multi-model assessment of energy and emissions for India’s transportation sector through 205010.1016/j.enpol.2018.01.037 ↗
4. Health co-benefits of achieving sustainable net-zero greenhouse gas emissions in California10.1038/s41893-020-0520-y ↗
5. Scenario analysis on the global carbon emissions reduction goal proposed in the declaration of the 2009 G8 Summit10.1007/s11430-009-0197-6 ↗
6. Study of eco-processed pozzolan characterization as partial replacement of cement
7. Reuse of spent bleaching earth by polymerisation of residual organics10.1016/j.wasman.2014.04.021 ↗
8. Enhancement of palm oil refinery waste - Spent bleaching earth (SBE) into bio organic fertilizer and their effects on crop biomass growth10.1016/j.indcrop.2013.06.016 ↗
9. The development of compressive strength of ground granulated blast furnace slag-palm oil fuel ash-fly ash based geopolymer mortar10.1016/j.matdes.2013.11.080 ↗
10. Performance evaluation and some durability characteristics of environmental friendly palm oil clinker based geopolymer concrete10.1016/j.jclepro.2017.05.002 ↗
11. Incorporation of nano-materials in cement composite and geopolymer based paste and mortar – A review10.1016/j.conbuildmat.2017.04.206 ↗
12. J. H. Kho, “Incorporation of Eco Process Pozzolan (EPP) as Partial Cement Replacement and Superplasticisers in Concrete,” IOP Conf. Ser. Earth Environ. Sci., vol. 682, no. 1, 2021, doi: 10.1088/1755-1315/682/1/012014.10.1088/1755-1315/682/1/012014 ↗
13. Influence of source materials and the role of oxide composition on the performance of ternary blended sustainable geopolymer mortar10.1016/j.conbuildmat.2017.03.178 ↗
14. Global warming impact on the cement and aggregates industries
15. Review Geopolymer Cement 2013.pdf
16. Utilization of Palm Oil Clinker as Cement Replacement Material10.3390/ma8125494 ↗
17. “Influence of Eco Process Pozzolan on the properties of Foamed Concrete”, no
18. Strength and microstructural properties of fly ash based geopolymer concrete containing high-calcium and water-absorptive aggregate10.1016/j.jclepro.2015.06.058 ↗
19. Effect of GGBFS on setting, workability and early strength properties of fly ash geopolymer concrete cured in ambient condition10.1016/j.conbuildmat.2014.05.080 ↗
20. Fresh and hardened properties of one-part fly ash-based geopolymer binders cured at room temperature: Effect of slag and alkali activators10.1016/j.jclepro.2019.03.290 ↗
21. Effect of SiO 2 and Al 2O 3on the setting and hardening of high calcium fly ash-based geopolymer systems10.1007/s10853-012-6353-y ↗
22. Effects of Parameters on the Setting Time of Fly Ash Based Geopolymers Using Taguchi Method10.1016/j.proeng.2016.06.624 ↗
23. Effects of blast-furnace slag on natural pozzolan-based geopolymer cement
24. Effects of initial SiO2/Al2O3 molar ratio and slag on fly ash-based ambient cured geopolymer properties10.1016/j.conbuildmat.2021.123527 ↗
25. Impact of curing temperatures and alkaline activators on compressive strength and porosity of ternary blended geopolymer mortars
26. Effects of POFA replaced with FA on durability properties of GBFS included alkali activated mortars10.1016/j.conbuildmat.2018.04.166 ↗
27. Utilization of palm oil fuel ash as binder in lightweight oil palm shell geopolymer concrete10.1155/2014/610274 ↗
28. Durability study on coal fly ash-blast furnace slag geopolymer concretes with bio-additives10.1016/j.ceramint.2017.06.042 ↗
29. Use of palm oil fuel ash as a supplementary cementitious material for producing high-strength concrete10.1016/j.conbuildmat.2009.01.008 ↗
30. Properties of fly ash geopolymer concrete designed by Taguchi method10.1016/j.matdes.2011.10.036 ↗
31. Impact resistance of hybrid fibre-reinforced oil palm shell concrete10.1016/j.conbuildmat.2013.10.016 ↗
32. Design and Control of Concrete Mixtures – The Guide to Applications
33. Effective utilisation of ultrafine slag to improve mechanical and durability properties of recycled aggregates geopolymer concrete
34. Structural lightweight aggregate concrete using two types of waste from the palm oil industry as aggregate10.1016/j.jclepro.2014.05.051 ↗
35. F. G. Becker et al., No Title, vol. 7, no. 1. 2015. [Online]. Available: https://www.researchgate.net/publication/269107473_What_is_governance/link/548173090cf22525dcb61443/download%0Ahttp://www.econ.upf.edu/∼reynal/Civil wars_12December2010.pdf%0.
36. Manufacture and performance of lightweight aggregate from municipal solid waste incinerator fly ash and reservoir sediment for self-consolidating lightweight concrete10.1016/j.cemconcomp.2012.07.004 ↗
37. Reviewing the behaviour of high volume fly ash based self compacting concrete
38. Fresh and hardened properties of self-compacting concrete produced with manufactured sand10.1016/j.cemconcomp.2010.11.005 ↗
39. Volume based design approach for sustainable palm oil clinker as whole replacement for conventional sand in mortar
40. High volume cement replacement by environmental friendly industrial by-product palm oil clinker powder in cement – lime masonry mortar10.1016/j.jclepro.2018.03.291 ↗
41. Microstructure of self-consolidating high strength concrete incorporating palm oil fuel ash
42. Experimental study of XRD, FTIR and TGA techniques in geopolymeric materials
43. The effect of alkali and Si/Al ratio on the development of mechanical properties of metakaolin-based geopolymers10.1016/j.colsurfa.2006.05.044 ↗
44. Drying shrinkage of slag blended fly ash geopolymer concrete cured at room temperature10.1016/j.proeng.2015.11.066 ↗
45. Compressive strength and microstructural analysis of fly ash/palm oil fuel ash based geopolymer mortar10.1016/j.matdes.2014.03.037 ↗
46. Synthesis of Sustainable Ternary Binders and Sand-Cement Ratio on the Mechanical and Microstructural Properties of Geopolymer Foamed Concrete
47. Influence of different curing temperatures and alkali activators on properties of GBFS geopolymer mortars containing fly ash and palm-oil fuel ash10.1016/j.conbuildmat.2016.08.153 ↗
48. Microstructural and Strength Characteristics of High-Strength Mortar Using Nontraditional Supplementary Cementitious Materials10.1061/(ASCE)MT.1943-5533.0002626 ↗
49. Y. Wang et al., “Study of acidic degradation of alkali-activated materials using synthetic C-(N)-A-S-H and N-A-S-H gels,” Compos. Part B Eng., vol. 230, no. November 2021, p. 109510, 2022, doi: 10.1016/j.compositesb.2021.109510.10.1016/j.compositesb.2021.109510 ↗
50. Geopolymerization reaction, microstructure and simulation of metakaolin-based geopolymers at extended Si/Al ratios10.1016/j.cemconcomp.2017.01.014 ↗
51. Compatibility studies between N-A-S-H and C-A-S-H gels. Study in the ternary diagram Na2O-CaO-Al2O3-SiO 2–H2O10.1016/j.cemconres.2011.05.006 ↗
52. Production of geopolymers using glass produced from DC plasma treatment of air pollution control (APC) residues10.1016/j.jhazmat.2009.11.089 ↗
53. Utilization of palm oil clinker as cement replacement material
54. Natali, M. E., C. E. White and M. C. J. F. Bignozzi (2016). “Elucidating the atomic structures of different sources of fly ash using X-ray and neutron PDF analysis.” 177: 148-156.10.1016/j.fuel.2016.03.017 ↗
55. Komljenović, M., Z. Baščarević and V. J. J. o. H. M. Bradić (2010). “Mechanical and microstructural properties of alkali-activated fly ash geopolymers.” 181(1-3): 35-42.10.1016/j.jhazmat.2010.04.064 ↗
56. Huseien, G. F., M. Ismail, N. H. A. Khalid, M. W. Hussin and J. J. A. e. j. Mirza (2018). “Compressive strength and microstructure of assorted wastes incorporated geopolymer mortars: Effect of solution molarity.” 57(4): 3375-3386.10.1016/j.aej.2018.07.011 ↗
57. Kumar, S., R. Kumar and S. J. J. o. m. s. Mehrotra (2010). “Influence of granulated blast furnace slag on the reaction, structure and properties of fly ash based geopolymer.” 45: 607-615.10.1007/s10853-009-3934-5 ↗
58. Nagajothi, S. and S. J. S. Elavenil (2021). “Effect of GGBS addition on reactivity and microstructure properties of ambient cured fly ash based geopolymer concrete.” 13: 507-516.10.1007/s12633-020-00470-w ↗