journal article·2023-08

Dynamic mechanical properties, interface structure evolution and deformation behaviors of PVA-carbon fiber reinforced concrete with negative Poisson’s ratio design

Yanxuan Ma, Fei Zhao, Jin Liu, Yun Zhang, Yaqian Xu, Peng Zhang, Song Gao, Jian Zhang

Publisher page

Abstract

Based on the advantages of negative Poisson`s ratio (NPR) materials in controlling deformation and absorbing energy, this paper combines NPR design with the preparation of fiber reinforced concrete (FRC) to optimize the anti-dynamic load performance of FRC. In this paper, a helical auxetic yarn (Hay) with NPR effect is obtained by wrapping carbon fiber (CF) on polyvinyl alcohol fiber (PVAF) at a certain angle, and it is mixed into concrete in different forms to obtain auxetic fiber concrete. In order to explore the influence of auxetic fiber on the anti-dynamic load performance of concrete, split Hopkinson pressure bar (SHPB) test and dropping ball impact test are carried out on different FRC. The impact resistance of FRC under different impact velocities is tested, and the impact resistance behavior of FRC is analyzed by digital speckle correlation method (DSCM). The results show that in SHPB test, the anti-impact strength of the layered auxetic fiber concrete is 19.1 % higher than that of the plain concrete (PC), and its fracture energy is increased by 25.8 %. In the dropping ball impact test, its fracture energy is 5 ∼ 9 times that of PC. In addition, the results of scanning electron microscopy (SEM) and DSCM test show that the incorporation of auxetic fiber has a positive effect on improving the generation and development of internal cracks in concrete, which is expected to provide a reference for the application of NPR materials in explosion resistance, penetration resistance and impact resistance of building structures.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Cellular and Composite Structures · Structural Response to Dynamic Loads · High-Velocity Impact and Material Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. Investigation of toughness of ultra high performance fibre reinforced concrete (UHPFRC) beam under impact loading10.1016/j.ijimpeng.2016.09.014 ↗
2. Negative Poisson’s ratio design, static mechanical properties and deformation behaviors on PVA-carbon fiber reinforced concrete10.1007/s10853-022-08116-5 ↗
3. Drop-Weight impact resistance of ultrahigh-performance concrete and the corresponding statistical analysis
4. Seismic behavior of steel fiber-reinforced high-strength concrete mid-rise shear walls with high-strength steel rebar10.1016/j.jobe.2021.102462 ↗
5. Tensile behavior of ultra high performance hybrid fiber reinforced concrete10.1016/j.cemconcomp.2011.09.009 ↗
6. Experimental study on the fire behaviour of fibre reinforced concrete used in tunnel applications10.1016/j.firesaf.2020.103173 ↗
7. Research progress in environmental response of fiber concrete and its functional mechanisms
8. Effect of basalt fibers on the flexural behavior of concrete beams reinforced with BFRP bars10.1016/j.compstruct.2019.02.050 ↗
9. Investigating the performance of PVA and basalt fibre reinforced beams subjected to flexural action10.1016/j.compstruct.2016.06.008 ↗
10. Mechanical behaviour and fibre dispersion of hybrid steel fibre reinforced self-compacting concrete10.1016/j.conbuildmat.2011.08.044 ↗
11. Experimental study on impact resistance of concrete containing steel fibers10.4028/www.scientific.net/KEM.872.1 ↗
12. Synergistic effect of steel fibres and coarse aggregates on impact properties of ultra-high performance fibre reinforced concrete10.1016/j.cemconcomp.2020.103866 ↗
13. Experimental and numerical analysis of blast response of high strength fiber reinforced concrete slabs10.1016/j.engstruct.2018.08.016 ↗
14. Mechanical properties of hybrid self-compacting fibre-reinforced concrete (SCC-FRC) containing PVA and PP fibres
15. Synergy in shear response of ultra-high-performance hybrid-fiber-reinforced concrete at high strain rates10.1016/j.compstruct.2018.04.075 ↗
16. Compressive stress-strain behavior of CFRP-confined lightweight aggregate concrete reinforced with hybrid fibers10.1016/j.compstruct.2020.112288 ↗
17. Flexural behavior of ultra-high performance hybrid fiber reinforced concrete at the ambient and elevated temperature10.1016/j.conbuildmat.2020.118487 ↗
18. Impact resistance, microstructures and digital image processing on self-compacting concrete with hooked end and crimped steel fiber10.1016/j.conbuildmat.2019.06.001 ↗
19. Impact resistance of steel fiber reinforced concrete in cold temperatures10.1016/j.cemconcomp.2021.104116 ↗
20. Influence of key design parameters of ultra-high performance fibre reinforced concrete on in-service bullet resistance10.1016/j.ijimpeng.2019.103434 ↗
21. An experimental study on the fatigue failure of steel fibre reinforced concrete at a single fibre level10.1016/j.conbuildmat.2021.123869 ↗
22. Ultra-high performance concrete and fiber reinforced concrete: achieving strength and ductility without heat curing10.1617/s11527-011-9767-0 ↗
23. Mechanical and structural behaviors of ultra-high-performance fiber-reinforced concrete subjected to impact and blast10.1016/j.conbuildmat.2017.05.136 ↗
24. K.E. Evans, M.A. Nkansah, I.J. Hutchinson, Molecular network design, Nature 353 (1991) 124–124.10.1038/353124a0 ↗
25. Foam structures with a negative Poisson’s ratio10.1126/science.235.4792.1038 ↗
26. Auxetic metamaterials and structures: a review10.1088/1361-665X/aaa61c ↗
27. Mechanical design, impact energy absorption and applications of auxetic structures in automobile lightweight engineering
28. Foam structures with a negative Poisson's ratio10.1126/science.235.4792.1038 ↗
29. The manufacture and characterisation of a novel, low modulus, negative Poisson's ratio composite10.1016/j.compscitech.2008.12.016 ↗
30. A negative Poisson's ratio carbon fibre composite using a negative Poisson's ratio yarn reinforcement10.1016/j.compscitech.2012.01.025 ↗
31. Auxetic composite made with multilayer orthogonal structural reinforcement10.1016/j.compstruct.2015.08.110 ↗
32. Development of composites, reinforced by novel 3D woven orthogonal fabrics with enhanced auxeticity10.1177/1528083718795912 ↗
33. Negative Poisson’s ratio design, static mechanical properties and deformation behaviors on PVA-carbon fiber reinforced concrete10.1007/s10853-022-08116-5 ↗
34. Mechanical properties of concrete composites with auxetic single and layered honeycomb structures10.1016/j.conbuildmat.2022.126453 ↗
35. A novel cement-based auxetic foam composite: Experimental study
36. On impact behaviors of 3D concave structures with negative Poisson’s ratio10.1016/j.compstruct.2022.115999 ↗
37. The helical auxetic yarn – A novel structure for composites and textiles; geometry, manufacture and mechanical properties10.1016/j.mechmat.2011.05.003 ↗
38. Tensile properties of helical auxetic structures: A numerical study10.1063/1.3465378 ↗
39. Study on mechanical properties of cost-effective polyvinyl alcohol engineered cementitious composites (PVA-ECC)10.1016/j.conbuildmat.2014.12.071 ↗
40. Dynamic behaviour and visco-elastic damage model of ultra-high performance cementitious composite10.1016/j.cemconres.2009.07.012 ↗
41. Parametric sensitivity analysis to maximise auxetic effect of polymeric fibre based helical yarn10.1016/j.compstruct.2016.11.077 ↗
42. Auxetic fibrous structures and their composites: A review10.1016/j.compstruct.2022.115530 ↗
43. Dynamics behaviour of gas-bearing coal subjected to SHPB tests10.1016/j.compstruct.2020.113088 ↗
44. Impact resistance of steel fiber-reinforced self-compacting concrete
45. Application of DSCM in prediction of potential fatigue crack path on concrete surface10.1016/j.engfracmech.2007.01.023 ↗
46. Digital image correlation using newton-raphson method of partial differential correction10.1007/BF02321405 ↗
47. Impact characterization and modelling of basalt-polypropylene fibre-reinforced concrete containing mineral admixtures10.1016/j.cemconcomp.2018.07.019 ↗
48. Numerical simulation of the Split Hopkinson Pressure Bar test technique for concrete under compression10.1016/j.ijimpeng.2009.06.012 ↗
49. Research on compressive impact dynamic behavior and constitutive model of polypropylene fiber reinforced concrete10.1016/j.conbuildmat.2018.07.164 ↗
50. A study of strain-rate effect and fiber reinforcement effect on dynamic behavior of steel fiber-reinforced concrete10.1016/j.conbuildmat.2017.09.093 ↗
51. Fracture characteristics of various concrete composites containing polypropylene fibers through five fracture mechanics methods10.1515/mt-2022-0210 ↗
52. Damage behavior and energy absorption characteristics of foamed concrete under dynamic load10.1016/j.conbuildmat.2022.129340 ↗
53. Experimental study on crack features of steel fiber reinforced concrete tunnel segments subjected to eccentric compression10.1016/j.mtcomm.2020.101349 ↗
54. Experimental study on mechanical properties of fiber reinforced concrete: Effect of cellulose fiber, polyvinyl alcohol fiber and polyolefin fiber10.1016/j.conbuildmat.2020.120610 ↗
55. Improvement effect of steel fiber orientation control on mechanical performance of UHPC10.1016/j.conbuildmat.2018.08.146 ↗
56. Contribution of fiber orientation to enhancing dynamic properties of UHPC under impact loading10.1016/j.cemconcomp.2021.104108 ↗
57. A cyclic plastic-damage multiphase model for evaluation of multiple cracking in strain hardening cementitious composites10.1016/j.jmps.2021.104692 ↗
58. Analysis of axial pile-soil interaction in clay10.1002/nag.1610100403 ↗