journal article·2023-08Open access

Determination of the temperature-dependent thermophysical properties of polymeric foams using numerical inverse analysis

A.P.C. Duarte, P. Mazzuca, J.M. Lopo de Carvalho, C. Tiago, J.P. Firmo, J.R. Correia

Abstract

Polymeric foams used as core materials of sandwich panels undergo severe degradation under high temperatures, making the experimental measurement of their thermophysical properties (thermal conductivity and specific heat) possible only up to 150 °C–200 °C. However, their knowledge at higher temperatures is needed to fully understand their behaviour and to develop advanced numerical models for analysis and design of sandwich structures subjected to fire. This work presents a numerical inverse analysis procedure to determine such effective properties for rigid polyurethane (PUR) and polyethylene terephthalate (PET) foams. Firstly, the campaign used to obtain experimental results is presented and then the proposed numerical inverse analysis procedure is described. This is based on the minimization of a least squares functional and a nonlinear finite element thermal analysis. Next, the numerical results and the effective thermophysical properties obtained for both foams are presented and discussed, and are validated by extending their use to the simulation of the thermal response of a sandwich panel subjected to a standard fire. It is concluded that the numerical procedure is capable of estimating the temperature-dependent effective thermal conductivity and specific heat of PUR and PET foams for temperatures well above those corresponding to their decomposition.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Cellular and Composite Structures · Flame retardant materials and properties · Fire dynamics and safety research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Bank LC (2006). Composites for construction : structural design with FRP materials, John Wiley & Sons: Hoboken, New Jersey.10.1002/9780470121429 ↗
2. Zenkert D (1997). The Handbook Of Sandwich Construction, in: Engineering Materials Advisory Services (EMAS): Worcestershire, UK, pp. 23–43.
3. State-of-the-art review on FRP sandwich systems for lightweight civil infrastructure
4. Hollaway · 2008
5. Davies J (2001). Lightweight sandwich construction, in: Blackwell Science: Oxford, UK, pp. 26–36.10.1002/9780470690253 ↗
6. Correia JR (2015). Fibre-Reinforced (FRP) Composites, in: Mater. Constr. Civ. Eng. Sci. Process. Des., Springer: Dordrecht, Netherlands, pp. 501–543.10.1007/978-3-319-08236-3_11 ↗
7. Non-linear thermal response of sandwich panels with a flexible core and temperature dependent mechanical properties10.1016/j.compositesb.2007.02.013 ↗
8. F. Klaus U. Breuer Multifunctionality of Polymer Composites Multifunctionality of Polymer Composites Challenges and New Solutions Elsevier 2015 Oxford UK 262 296.
9. Fire resistance behaviour of GFRP-polyurethane composite sandwich panels for building floors10.1016/j.compositesb.2021.109171 ↗
10. Fire stability of glass-fibre sandwich panels: The influence of core materials and flame retardants10.1016/j.compstruct.2016.11.027 ↗
11. CEN/TS 19101 (2022). Design of fibre-polymer composite structures, European Committee for Standardisation: Brussels, Belgium.
12. Thermophysical properties of polyurethane foams and their melts10.1002/fam.2188 ↗
13. Mechanical behaviour in shear and compression at elevated temperature of polyethylene terephthalate (PET) foam
14. Mechanical behaviour in shear and compression of polyurethane foam at elevated temperature10.1177/10996362211050919 ↗
15. Effects of elevated temperature on the shear response of PET and PUR foams used in composite sandwich panels10.1016/j.conbuildmat.2014.11.053 ↗
16. ISO 11357-2 (1999). Differential scanning calorimetry (DSC) determination of glass transition temperature, International Organization for Standardization: Geneve, Switzerland.
17. Proença M, Garrido M, Correia JR (2020). Fire behaviour of GFRP composite sandwich panels, Task 4.7 - ANI - EASYFLOOR Project Report 4.7.2 / CERIS Report DTC no. 3/2020, CERIS: Lisboa, Portugal.
18. L. Valencia Experimental and numerical investigation of the thermal decomposition of materials at three scales: application to polyether polyurethane foam used in upholstered furniture, PhD thesis in Aeronautic Engineering École Nationale Supérieure de Mécanique et d’Aérotechnique, Institut Supérieur de l'Aéronautique et de l’Espace 2009 Poitiers, France.
19. Experimental study of the thermal conductivity of polyurethane foams10.1016/j.applthermaleng.2016.12.057 ↗
20. Jarfelt W, Ramnäs O (2006). Thermal conductivity of polyurethane foam - best performance, 10th Int. Symp. Dist. Heat. Cool.: Reykjavik, Iceland.
21. ASTM C177 (2019). Standard test method for steady-state heat flux measurements and thermal transmission properties by means of the guarded-hot-plate apparatus, ASTM International: West Conshohocken, PA, USA.
22. ISO 22007-2 (2022). Plastics – Determination of thermal conductivity and thermal diffusivity – Part 2: Transient plane heat source (hot disc) method, International Organization for Standardization: Geneve, Switzerland.
23. Glicksman · 1994
24. Gibson LJ, Ashby MF (1997). Cellular Solids: Structure & properties, in: Pergamon Press: Oxford, UK, pp. 236–257.10.1017/CBO9781139878326 ↗
25. Experimental and numerical study of temperature developments in PIR core sandwich panels with joint10.1016/j.firesaf.2017.03.003 ↗
26. 2014
27. ASTM D-5930 (2017). Standard test method for thermal conductivity of plastics by means of a transient line-source technique, ASTM international: West Conshohocken, PA, USA.
28. Fernandes P, Gomes MG (2015). “Experimental tests to determine the GFRP sandwich panels’ thermal properties - Task 4.6 - CLICKHOUSE Report 4.6 / ICIST Report DTC 3/2015”. CERIS: Lisbon, Portugal.
29. Proença M, Gomes MG, Garrido M, Correia JR (2018). “Thermal behavior of pultruded composite sandwich panels for applications in building floors - Task 4.6 – ANI – EASYFLOOR / CERIS Report DTC 38/2020”. CERIS: Lisbon, Portugal.
30. ISO 834, Fire resistance tests. Elements of building construction, International Organization for Standardization 2018 Geneve, Switzerland.
31. CEN (2005). EN 1993-1-2. Eurocode 3: Design of steel structures – Part 1-2: General rules – Structural fire design. European Committee for Standardization: Brussels, Belgium.
32. D'Errico J (2022). fminsearchbnd, fminsearchcon (https://www.mathworks.com/matlabcentral/fileexchange/8277-fminsearchbnd-fminsearchcon), MATLAB Central File Exchange. Retrieved February 27, 2022.
33. MathWorks (2022) MATLAB R2020a, MathWorks: Natick, MA, USA.
34. Thermophysical properties of balsa wood used as core of sandwich composite bridge decks exposed to external fire10.1016/j.conbuildmat.2022.127164 ↗
35. Reddy JN, Gartling DK (2010). The Finite Element Method in Heat Transfer and Fluid Dynamics (3rd Ed.), Taylor & Francis: Oxford, UK.10.1201/9781439882573 ↗
36. Bergheau J-M, Fortunier R (2013). Finite Element Simulation of Heat Transfer (1st Ed.), John Wiley & Sons: Hoboken, NJ, USA.
37. 2016
38. CEN (2002). EN 1991 1-2. Eurocode 1: Actions on structures - Part 1-2: General actions - Actions on structures exposed to fire, European Committee for Standardization: Brussels, Belgium.
39. Simulia · 2018
40. Modeling of thermo-physical properties for FRP composites under elevated and high temperature10.1016/j.compscitech.2007.04.019 ↗
41. Numerical modelling of the thermal response of pultruded GFRP tubular profiles subjected to fire10.1016/j.compositesb.2017.11.009 ↗