journal article·2023-08

Influence of fly ash and chlorides on the behavior of sulfate attack in blended cement pastes

Yu-Xiao Zou, Xiao-Bao Zuo, Hong-Liang Zhang, Shu-Qi Wang

Publisher page

Abstract

Sulfate-induced concrete deterioration is associated with not only its material compositions but also environmental conditions. This study has performed some experimental investigations on the influence of fly ash (FA) and chlorides on the behavior of sulfate attack in blended cement pastes, and they were quantitatively characterized by the contents of bound sulfates and chlorides. Firstly, FA-blended cement paste particles (FCPs) with different FA content were prepared, and then they were performed a series of immersion experiments. Finally, free sulfate and chloride concentrations in the solutions were measured by using ultraviolet spectrophotometry and silver nitrate titration, respectively, while the change of phase and chemical compositions in FCPs were analyzed by quantitative X-ray diffraction (QXRD), scanning electron microscopy and energy spectrometry (SEM-EDS). Results showed that, the addition of FA can not only increase the aluminum content in FCPs, improving the formation of sulfates-contained phases in Na 2SO 4 solution, but also influence the content and chemical compositions of C-(A)-S-H, resulting in the decrease of physical binding capacity of sulfates. The content of physically bound sulfates can be released by the sulfate-induced decalcification of C-(A)-S-H. After the sulfates-contained FCPs were immersed into NaCl solutions, the presence of chlorides can release the bound sulfates from the sulfates-contained phases, resulting in the formation of chlorides-contained phases. Additionally, the releasing effect of chlorides on the physically bound sulfates becomes more pronounced than that on the chemically bound sulfates, especially in the chloride solution with a high concentration. Eventually, these conclusions were consistent with the SEM-EDS results.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications · Recycling and utilization of industrial and municipal waste in materials production

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. Environmental impacts and decarbonization strategies in the cement and concrete industries10.1038/s43017-020-0093-3 ↗
2. Life-cycle inventory analysis of concrete production: A critical review10.1016/j.cemconcomp.2014.03.005 ↗
3. Numerical investigation of external sulfate attack and its effect on chloride binding and diffusion in concrete10.1016/j.conbuildmat.2021.122806 ↗
4. A review on the deterioration and approaches to enhance the durability of concrete in the marine environment10.1016/j.cemconcomp.2020.103695 ↗
5. Corrosion of steel rebar in concrete induced by chloride ions under natural environments10.1016/j.conbuildmat.2023.130504 ↗
6. Study of deterioration of concrete exposed to different types of sulfate solutions under drying-wetting cycles10.1016/j.conbuildmat.2016.04.094 ↗
7. Zhao · 2016
8. Determination of rust formation to cracking at the steel-concrete interface by corrosion of steel in concrete10.1016/j.conbuildmat.2022.130215 ↗
9. Chloride binding related to hydration products: Part I: Ordinary Portland Cement10.1016/j.cemconres.2011.09.016 ↗
10. The stability of bound chlorides in cement paste with sulfate attack10.1016/j.cemconres.2014.11.010 ↗
11. The AFm phase in Portland cement10.1016/j.cemconres.2006.10.010 ↗
12. Effect of physical and chemical sulfate attack on performance degradation of concrete under different conditions10.1016/j.cplett.2020.137254 ↗
13. Durability of cement pastes exposed to external sulfate attack and leaching: physical and chemical aspects10.1016/j.cemconres.2018.11.006 ↗
14. An integrated macro-microscopic model for concrete deterioration under external sulfate attack10.1016/j.engfracmech.2020.107345 ↗
15. The role of aluminium in CASH during sulfate attack on concrete10.1016/j.cemconres.2018.11.012 ↗
16. Ionic hydration structure, dynamics and adsorption mechanism of sulfate and sodium ions in the surface of calcium silicate hydrate gel: A molecular dynamics study10.1016/j.apsusc.2018.04.071 ↗
17. Coupled models to describe the combined diffusion-reaction behaviour of chloride and sulphate ions in cement-based systems10.1016/j.conbuildmat.2020.118232 ↗
18. Key inhibitory mechanism of external chloride ions on concrete sulfate attack10.1016/j.conbuildmat.2019.07.263 ↗
19. External sulfate attack of cementitious materials: New insights gained through numerical modeling including dissolution/precipitation kinetics and surface complexation10.1016/j.cemconcomp.2017.07.024 ↗
20. Impact of chloride on the mineralogy of hydrated Portland cement systems10.1016/j.cemconres.2010.03.002 ↗
21. A novel method for assessing CSH chloride adsorption in cement pastes10.1016/j.conbuildmat.2019.07.212 ↗
22. Electrokinetic potential of hydrated cement in relation to adsorption of chlorides10.1016/j.cemconres.2009.01.006 ↗
23. Supplementary cementitious materials10.1016/j.cemconres.2010.12.001 ↗
24. A review of waste products utilized as supplements to Portland cement in concrete10.1016/j.jclepro.2016.02.013 ↗
25. Roles of fly ash, granulated blast-furnace slag, and silica fume in long-term resistance to external sulfate attacks at atmospheric temperature10.1016/j.cemconcomp.2022.104696 ↗
26. Long-term performance of blended cement paste containing fly ash against sodium sulfate attack10.1061/(ASCE)MT.1943-5533.0002516 ↗
27. Alkali-activated grouts based on slag-fly ash mixtures: From early-age characterization to long-term phase composition10.1016/j.conbuildmat.2020.120510 ↗
28. Experimental investigation of pozzolanic reaction and curing temperature-dependence of low-calcium fly ash in cement system and Ca-Si-Al element distribution of fly ash-blended cement paste10.1016/j.conbuildmat.2020.121012 ↗
29. Improving the sulfate attack resistance of concrete by using supplementary cementitious materials (SCMs): A review10.1016/j.conbuildmat.2021.122628 ↗
30. GB/T 1596-2017. Fly ash used for cement and concrete, Beijing, China Standard Press, 2017, https://openstd.samr.gov.cn/bzgk/gb/newGbInfo?hcno=55F3B96AC1260FCD3C9452FF47C087E5.
31. ASTM C618 · 2012
32. Astm c305. · 2014
33. Determination of sulfate irons in concrete by spectrophotometer, Advanced Materials Research
34. Comprehensive resistance of fair-faced concrete suffering from sulfate attack under marine environments
35. SL/T 352-2020, Test code for hydraulic concrete, Beijing, Water Conservancy Industry, 2020, http://mwr.ckcest.cn/wstd/wrStdB/detail/STD000090595.
36. Scrivener · 2016
37. Quantification of amorphous siliceous fly ash in hydrated blended cement pastes by X-ray powder diffraction10.1107/S1600576719013955 ↗
38. A fundamental parameters approach to X-ray line-profile fitting10.1107/S0021889891010804 ↗
39. Crystal structure of Kuzel's salt 3CaO·Al2O3·1/2CaSO4·1/2CaCl2·11H2O determined by synchrotron powder diffraction10.1016/j.cemconres.2011.01.015 ↗
40. Optimization of SEM-EDS to determine the C-A-S-H composition in matured cement paste samples10.1016/j.matchar.2016.11.041 ↗
41. The impact of sulphate and magnesium on chloride binding in Portland cement paste10.1016/j.cemconres.2014.07.007 ↗
42. The role of chloride binding mechanism in the interpretation of chloride profiles in concrete containing limestone powder
43. Modification on the chloride binding capacity of alkali activated slag by applying calcium and aluminium containing phases10.1016/j.conbuildmat.2022.129427 ↗
44. Chloride binding behavior of cement paste influenced by metakaolin dosage and chloride concentration10.1016/j.cemconcomp.2022.104821 ↗
45. Effects of pH on the nano/micro structure of calcium silicate hydrate (CSH) under sulfate attack10.1016/j.cemconres.2020.106306 ↗
46. Quantitative study of Portland cement hydration by X-ray diffraction/Rietveld analysis and independent methods10.1016/j.cemconres.2004.04.014 ↗
47. Multiphase pozzolanic reaction model of low-calcium fly ash in cement systems10.1016/j.cemconres.2019.04.015 ↗
48. Hydration of quaternary Portland cement blends containing blast-furnace slag, siliceous fly ash and limestone powder10.1016/j.cemconcomp.2014.10.001 ↗
49. Investigation on chloride binding capacity and stability of Friedel's salt in graphene oxide reinforced cement paste10.1016/j.cemconcomp.2022.104603 ↗
50. Chloride binding into hydrated blended cements: The influence of limestone and alkalinity10.1016/j.cemconres.2013.02.010 ↗
51. Decalcification of calcium silicate hydrate (CSH) under aggressive solution attack10.1016/j.conbuildmat.2022.127988 ↗
52. Effects of water/powder ratio, mixing ratio of fly ash, and curing temperature on pozzolanic reaction of fly ash in cement paste10.1016/S0008-8846(00)00441-5 ↗
53. Composition, morphology and nanostructure of C-S-H in 70% white Portland cement - 30% fly ash blends hydrated at 55 degrees C10.1016/j.cemconres.2010.03.012 ↗
54. The chemical composition and microstructure of hydration products in blended cements10.1016/j.cemconcomp.2004.02.036 ↗