journal article·2023-09

Torsional performance of FRP bars reinforced seawater sea-sand engineered cementitious composites (SS-ECC) beams without stirrup: A numerical study

Jiangtao Yu, Yuanrui Su, Qiao Liao, Kequan Yu

Publisher page

Abstract

To alleviate the shortage of raw materials and tackle the challenge of steel corrosion, the authors used seawater and sea-sand to fabricate engineered cementitious composites (SS-ECC) beams and reinforced them only with fiber reinforced plastic (FRP) longitudinal bars. This article focused on the torsional behaviors of the SS-ECC beams through experimental and numerical studies. Finite element models (FEM) were established and well verified based on the torsional tests. The failure mechanism of the SS-ECC beams under pure torsion was carefully explored by analyzing the stress and strain distribution of SS-ECC at different positions. It is indicated that the SS-ECC beams with high fiber volume fraction tend to fail due to compressive damage. Furthermore, a parametric analysis was conducted to study the effects of various factors on the torsional performance. The strength grade of SS-ECC, rather than longitudinal reinforcement ratio and height/width ratio, makes the critical factor that determines the ultimate torque of the SS-ECC beams. This research lays the groundwork for understanding the torsional performance of the SS-ECC beams without stirrup.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Structural Behavior of Reinforced Concrete · Innovative concrete reinforcement materials · Concrete Corrosion and Durability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. Steady-state and multiple cracking of short random fiber composites
2. Multiple-scale investigations on self-healing induced mechanical property recovery of ECC10.1016/j.cemconcomp.2019.05.014 ↗
3. Paving an engineered cementitious composite (ECC) overlay on concrete airfield pavement for reflective cracking resistance10.1016/j.conbuildmat.2020.119048 ↗
4. Size effects on tensile properties and compressive strength of engineered cementitious composites10.1016/j.cemconcomp.2020.103691 ↗
5. Flexural size effect of ultra-high ductile concrete under different damage and ductility levels10.1016/j.cemconcomp.2020.103852 ↗
6. Experimental study on the size effect of ultra-high ductile cementitious composites10.1016/j.conbuildmat.2019.117963 ↗
7. Performance-based design of all-grade strain hardening cementitious composites with compressive strengths from 40MPa to 120MPa10.1016/j.cemconcomp.2019.01.001 ↗
8. Shaking-table test on a two-story timber-framed masonry structure retrofitted with ultra-high ductile concrete10.1061/(ASCE)ST.1943-541X.0003164 ↗
9. Feasibility of using ultra-high ductility cementitious composites for concrete structures without steel rebar10.1016/j.engstruct.2018.05.037 ↗
10. Experimental study of reinforced UHDC-UHPC panels under close-in blast loading
11. Mechanical behaviors and failure criteria of seawater sea-sand engineered cementitious composites under combined tension and shear10.1016/j.jobe.2022.104552 ↗
12. Seawater sea-sand engineered cementitious composites (SS-ECC) for marine and coastal applications10.1016/j.coco.2020.04.019 ↗
13. Flexural durability of seawater coral aggregate concrete beams reinforced with basalt FRP bars10.1061/(ASCE)CC.1943-5614.0001201 ↗
14. Experimental study on fatigue bond behaviour between basalt fibre-reinforced polymer bars and recycled aggregate concrete10.1016/j.conbuildmat.2020.121399 ↗
15. Seawater sea-sand engineered cementitious composites contribution to shear performance of beams reinforced with BFRP bars10.1016/j.compstruct.2023.117183 ↗
16. Flexural behaviors of glass fiber-reinforced polymer (GFRP) reinforced engineered cementitious composite beams
17. Flexural behaviors of ECC and concrete/ECC composite beams reinforced with basalt fiber-reinforced polymer10.1061/(ASCE)CC.1943-5614.0000381 ↗
18. Flexural behavior of basalt FRP reinforced ECC and concrete beams10.1016/j.conbuildmat.2017.03.087 ↗
19. Experimental and analytical study on shear behavior of strain-hardening cementitious composite beams reinforced with fiber-reinforced polymer bars10.1002/suco.202100544 ↗
20. Experimental study of tensile properties of composite system of high performance concrete and reinforcements
21. The effect of freeze-thaw cycles on flexural behaviour of FRP-reinforced ECC beams10.1007/s43452-021-00258-8 ↗
22. Structural performance evaluation of ECC link slabs reinforced with FRP bars for jointless bridge decks10.1016/j.conbuildmat.2021.124462 ↗
23. Investigation of the behaviour of flexible and ductile ECC link slab reinforced with FRP10.1016/j.conbuildmat.2018.01.188 ↗
24. Deformation behavior of fiber-reinforced polymer reinforced engineered cementitious composite (ECC) flexural members under reversed cyclic loading conditions
25. Static and vibration characteristics of thin-walled box beams: An experimental investigation10.1177/1369433216687565 ↗
26. A unified approach for determining the strength of FRC beams subjected to torsion-Part II: Analytical modeling10.1002/suco.202100162 ↗
27. Finite beam element with 22 DOF for curved composite box girders considering torsion, distortion, and biaxial slip10.1007/s43452-020-00098-y ↗
28. Behaviour of steel-reinforced concrete columns under combined torsion based on ABAQUS FEA10.1016/j.engstruct.2019.109980 ↗
29. Numerical investigation on the bearing capacity of RC columns strengthened by HPFL-BSP under combined loadings
30. Experimental study on torsional behavior of FRC and ECC beams reinforced with GFRP bars10.1016/j.conbuildmat.2017.06.131 ↗
31. Mechanical and structural characterization of new carbon FRP stirrups for concrete members10.1061/(ASCE)1090-0268(2007)11:4(352) ↗
32. Torsion in concrete beams reinforced with GFRP spirals10.1016/j.engstruct.2020.110174 ↗
33. Bend strength of FRP stirrups: Comparison and evaluation of testing methods10.1061/(ASCE)CC.1943-5614.0000050 ↗
34. Torsional behavior of BFRP bars reinforced engineered cementitious composites beams without stirrup10.1016/j.engstruct.2022.114748 ↗
35. Simulation of highly ductile fiber-reinforced cement based composite components under cyclic loading
36. Experimental measurement and analysis of the axial compressive stress-strain curve of ultra high toughness cementitious composites
37. Basic mechanical properties of ultra-high ductility cementitious composites: From 40MPa to 120MPa10.1016/j.compstruct.2017.11.034 ↗
38. Prediction on the flexural deflection of ultra-high strength rebar reinforced ECC beams at service loads10.1016/j.istruc.2021.04.050 ↗
39. A theoretical model for the anti-fatigue design of steel reinforced ECC composite system under flexure10.1016/j.compstruct.2020.112293 ↗
40. Guo · 2003
41. Gu · 2015
42. Ying · 1990
43. Failure mechanisms and loading capacity prediction for rectangular UHPC beams under pure torsion10.1016/j.engstruct.2022.114426 ↗
44. Exploring GFRP bars as reinforcement for rectangular and L-shaped beams subjected to significant torsion: An experimental study10.1016/j.engstruct.2013.11.027 ↗