journal article·2023-10

Mechanical properties, permeability and microstructure of steam-cured fly ash mortar mixed with phosphogypsum

Bing Zhao, Guangjin Wang, Kui Zhao, Menglai Wang, Bisheng Wu, Shujian Li, Qinglin Chen, Jiabo Geng

Publisher page

Abstract

Incorporating proper amount of fly ash (FA) contributes to improve the long-term performance of steam-cured mortar. However, with the introduction of stringent environmental policies, the reserves of high-quality FAs are decreasing and the costs are increasing. In this study, phosphogypsum is used to replace part of FA to produce high-quality prefabricated components, and mechanical properties, water permeability, microstructure and environmental benefits of samples are investigated. The research results show that replacing FA with proper amount of PG can greatly increase mechanical properties of steam-cured FA mortar and improve its water impermeability. When 10% of PG is applied to the steam-cured FA mortar, the 1-d and 28-d compressive strengths of the samples increase by 11% and 5.37%, respectively, relative to the control mortar. The results of microstructure characterization show that this is due to the generation of swelling products and the increase of the reaction degree of FA. When PG and steam curing are applied in combination, FA is severely corroded and a gel phase product is generated, which contributes to increase the strength of specimen. In addition, using appropriate amount of PG also brings obvious economic and environmental benefits for prefabricated components.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Rock Mechanics and Modeling · Tailings Management and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Properties evolution of high-early-strength cement paste and interfacial transition zone during steam curing process10.1016/j.conbuildmat.2020.119095 ↗
2. Self-compacting concrete containing coarse recycled precast-concrete aggregate and its durability in marine-environment-related tests10.1016/j.conbuildmat.2023.131084 ↗
3. Effects of steam curing regimes on the capillary water absorption of concrete: Prediction using multivariable regression models10.1016/j.conbuildmat.2020.119426 ↗
4. Effects of curing methods of concrete after steam curing on mechanical strength and permeability10.1016/j.conbuildmat.2020.119441 ↗
5. Effect of steam curing on surface permeability of concrete: Multiple transmission media
6. Evolution of mechanical properties and permeability of concrete during steam curing process
7. A study on mechanical properties and permeability of steam-cured mortar with iron-copper tailings10.1016/j.conbuildmat.2023.131372 ↗
8. Effect of curing regime on long-term mechanical strength and transport properties of steam-cured concrete10.1016/j.conbuildmat.2020.119407 ↗
9. Experimental study on full-volume slag alkali-activated mortars: Air-cooled blast furnace slag versus machine-made sand as fine aggregates10.1016/j.jhazmat.2020.123983 ↗
10. Recycling hazardous water treatment sludge in cement-based construction materials: Mechanical properties, drying shrinkage, and nano-scale characteristics10.1016/j.jclepro.2021.125832 ↗
11. Chloride resistance of high-performance concretes subjected to accelerated curing10.1016/j.cemconres.2004.03.024 ↗
12. Influence of mineral admixtures on the short and long-term performance of steam-cured concrete10.1016/j.egypro.2012.01.134 ↗
13. Heat damage of concrete surfaces under steam curing and improvement measures10.1016/j.conbuildmat.2020.119104 ↗
14. An experimental study of different curing regimes on the mechanical properties and sorptivity of self-compacting mortars with fly ash and silica fume10.1016/j.conbuildmat.2017.03.228 ↗
15. New perspectives on utilization of CO2 sequestration technologies in cement-based materials10.1016/j.conbuildmat.2020.121660 ↗
16. Autogenous shrinkage and nano-mechanical properties of UHPC containing waste brick powder derived from construction and demolition waste10.1016/j.conbuildmat.2021.124869 ↗
17. Effect of thermo-mechanical activation of waste concrete powder (WCP) on the characteristics of cement mixtures10.1016/j.conbuildmat.2022.129713 ↗
18. Effect of sea water and MgSO4 solution on the mechanical properties and durability of self-compacting mortars with fly ash/silica fume10.1016/j.conbuildmat.2017.04.108 ↗
19. Mechanical and durability properties of self-compacting mortars containing binary and ternary mixes of fly ash and silica fume10.1002/suco.201800302 ↗
20. Improvement mechanism of water resistance and volume stability of magnesium oxychloride cement: A comparison study on the influences of various gypsum10.1016/j.scitotenv.2022.154546 ↗
21. A new eco-friendly concrete made of high content phosphogypsum based aggregates and binder: Mechanical properties and environmental benefits10.1016/j.jclepro.2023.136555 ↗
22. Preparation of phosphogypsum (PG) based artificial aggregate and its application in the asphalt mixture10.1016/j.conbuildmat.2022.129218 ↗
23. Utilization of weathered phosphogypsum as set retarder in Portland cement10.1016/j.cemconres.2003.10.017 ↗
24. Use of untreated phosphogypsum as a raw material for autoclaved aerated concrete preparation
25. Recycling flue gas desulfurisation gypsum and phosphogypsum for cemented paste backfill and its acid resistance10.1016/j.conbuildmat.2020.122170 ↗
26. Activation of fly ash-lime systems using calcined phosphogypsum10.1016/j.conbuildmat.2006.12.005 ↗
27. ASTM C109–2021. Standard Test Method for Compressive Strength of Hydraulic Cement Mortars, West Conshohocken PA.
28. ASTM C348–2021. Standard Test Method for Flexural Strength of Hydraulic-Cement Mortars, West Conshohocken PA.
29. A novel development of green UHPC containing waste concrete powder derived from construction and demolition waste10.1016/j.powtec.2021.117075 ↗
30. Reverse filling cementitious materials based on dense packing: The concept and application10.1016/j.powtec.2019.09.050 ↗
31. ASTM C1585–2020. Standard Test Method For Measurement Of Rate Of Absorption Of Water By Hydraulic-Cement Concretes, West Conshohocken PA.
32. Direct electric curing in high early-strength sodium citrate-doped Portland cement systems for sustainable energy saving applications10.1016/j.apenergy.2023.121381 ↗
33. Life cycle assessment of onshore wind power systems in China10.1016/j.resconrec.2017.06.014 ↗
34. Assessment of the sustainability potential of concrete and concrete structures considering their environmental impact, performance and lifetime10.1016/j.conbuildmat.2014.01.039 ↗
35. Synergistic enhancement of mechanical property of the high replacement low-calcium ultrafine fly ash blended cement paste by multiple chemical activators
36. Hydration mechanism and thermodynamic simulation of ecological ternary cements containing phosphogypsum
37. The mechanical properties of supersulphated cement containing phosphogypsum10.1016/0008-8846(93)90141-U ↗
38. Activation of fly ash/cement systems using calcium sulfate anhydrite (CaSO4)10.1016/S0008-8846(01)00478-1 ↗
39. Pore structures of fly ashes activated by Ca(OH)2 and CaSO4·2H2O10.1016/0008-8846(95)00027-5 ↗